Menu
EUR

Case IH JX 80U tractor parts & technical data

The Case IH JX 80U from the JXU series is covered with more than 200 parts. Browse trailer couplings, lighting and brake and transmission parts by group.

215 parts found for Case IH JX 80U
Show:
GRANIT Seal kit
5%
GRANIT
Seal kit
€48,21 €39,84 €45,75 €37,81
 
Brake reservoir Ford, Case IH, Fiat, Steyr, New Holland
5%
Brake reservoir Ford, Case IH, Fiat, Steyr, New Holland
€48,76 €40,30 €46,30 €38,26
 
ROCKINGER Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
20%
ROCKINGER
Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.075,69 €889,00 €864,85 €714,75
 
GRAMMER Tractor seat Compacto Basic W MSG83/721 mechanical suspension, PVC
5%
GRAMMER
Tractor seat Compacto Basic W MSG83/721 mechanical suspension, PVC
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Tra...
€889,10 €734,79 €844,60 €698,02
 
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
5%
Sauermann
Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 30...
€1.527,62 €1.262,50 €1.451,20 €1.199,34
 
Starter ring gear Ø 335/293 mm, 110 teeth
5%
Starter ring gear Ø 335/293 mm, 110 teeth
Version: Ø 335/293 mm, 110 teeth.
€51,97 €42,95 €49,35 €40,79
 
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
5%
GRAMMER
Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Tra...
€980,10 €810,00 €931,00 €769,42
 
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
16%
Scharmüller
Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.390,39 €1.149,08 €1.171,10 €967,85
 
ROCKINGER Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
20%
ROCKINGER
Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31,...
€1.004,91 €830,50 €807,90 €667,69
 
ROCKINGER Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
23%
ROCKINGER
Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.440,75 €1.190,70 €1.103,20 €911,74
 
Alternator 14 V / 65 A, form A, flange 67,0 mm
5%
Alternator 14 V / 65 A, form A, flange 67,0 mm
To fit as: Case IH, Deutz-Fahr, Ford, Hürlimann, Lamborghini, Massey Ferguson, N...
€203,81 €168,44 €193,60 €160,00
 
Bush 53 x 57 x 42 mm Case IH
Bush 53 x 57 x 42 mm Case IH
€23,20 €19,17
 
MAHLE Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, V/TO
6%
MAHLE
Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, V/TO
No. of grooves: 2 | Nominal voltage (V): 12 | Refrigerant: R 134a | Connection: ...
€491,79 €406,44 €461,00 €380,99
 
ROCKINGER Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
20%
ROCKINGER
Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D-value: 98...
€1.079,32 €892,00 €867,75 €717,15
 
GRANIT Shaft seal hydraulic pump Case IH, Steyr
5%
GRANIT
Shaft seal hydraulic pump Case IH, Steyr
€41,38 €34,20 €39,30 €32,48
 
GRANIT Glow plug 12 V, thread 1/2 inch BSP
GRANIT
Glow plug 12 V, thread 1/2 inch BSP
Version: 12 V, thread 1/2" BSP.
€25,70 €21,24
 
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Menke no.: 49...
€39,15 €32,36
 
GRANIT Cylinder head gasket 1,43 mm Case IH, Fiat, New Holland
GRANIT
Cylinder head gasket 1,43 mm Case IH, Fiat, New Holland
Thickness: 1,43 mm.
€36,15 €29,88
 
GRANIT Track rod 1370 mm, M20 x 1, 18 - 20 mm, 32 mm
5%
GRANIT
Track rod 1370 mm, M20 x 1, 18 - 20 mm, 32 mm
A: 1380 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 32 mm. F: 19 ...
€315,93 €261,10 €300,10 €248,02
 
GRANIT Radiator hose, bottom inner-Ø 35 mm, length 80 mm
GRANIT
Radiator hose, bottom inner-Ø 35 mm, length 80 mm
Inner Ø: 35 mm. Length: 80 mm.
€4,84 €4,00
 
Showing 1 - 24 of 215

Case IH JX 80U parts that keep the clutch, cooling and cab working

A worn clutch, a weeping head gasket or an air conditioning system that has stopped cooling are the jobs that tend to bring a Case IH JX 80U into the workshop. This page gathers more than 200 replacement parts that fit this tractor, from suppliers such as GRANIT, LUK, Eaton, MAHLE and ROCKINGER.

For the double clutch there are pressure plate assemblies, alongside thrust bearings for the drive clutch and gear wheels for the gearbox. Once the tractor is split, fit a new release bearing with the clutch as a matter of routine. An old bearing that has started to whine will otherwise have you splitting the tractor again within a season. While the bell housing is open, check the rear crankshaft area for oil, because contamination ruins a new friction plate quickly.

Engine, air conditioning, cab and hitch

Engine work calls for cylinder head gaskets and piston sealing rings, and the thermostat housing has its own gasket. Alternators cover the charging side. If the battery keeps going flat, measure the charge at the terminals before swapping the alternator, as a poor earth or a loose belt can produce the same symptoms.

The air conditioning compressor runs on its own V-belt. A cracked or slack belt slips under load and the cab stays hot even though the system still holds gas, so start with a new belt before suspecting anything else. If the compressor itself has failed, a replacement is on this page.

Around the cab you will find gas struts for the rear window, rear lights, a fuel tank cap and seats for the operator. At the back of the tractor there are drawbars and the Piton Fix system from ROCKINGER for heavier trailers.

Matching a part to your JX 80U

The identification plate confirms the exact model, which matters in a family with so many close relatives. The removed part is usually the better guide, though. Gaskets, bearings and alternators often carry a reference number, and comparing that number with the details on the product page is the surest way to get it right first time.

The rest of the JXU line

If you also run one of these sister models, each has its own page with parts listed for that specific tractor:

Older and larger tractors from the same maker are reached through the overview of Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart