Menu
EUR

Case IH JXU 95 tractor parts & technical data

Trailer couplings, electrics, brakes and transmission: the range for the Case IH JXU 95 counts more than 200 parts, all selected to fit this model.

208 parts found for Case IH JXU 95
Show:
GRAMMER Seat Compacto COMFORT W MSG93/721, air suspended, fabric, 482 mm
GRAMMER
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 227 mm. Seat width: 482 mm. Fore/aft isolator: Yes. R... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€1.486,67 €1.228,65 €1.412,30 €1.167,19
You save 5%
GRANIT Bearing for lower link shaft Ø 25 mm Ford, Case IH, Fiat, New Holland
€48,32 €39,93 €45,90 €37,93
You save 5%
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.058,75 €875,00 €873,45 €721,86
You save 18%
GRANIT Sensor power take-off speed, connection cable with plug
GRANIT
Version: PTO shaft (speed), PTO speed, Connection cable with plug. More
Version: PTO shaft (speed), PTO speed, Connection cable with plug.
€90,92 €75,14 €82,25 €67,98
You save 10%
GRANIT Rear light left 199 x 85 x 145 mm, 12 V
GRANIT
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Width: 199 mm. Form: Rectangular, short sides rounded. Height: 85 mm. Dimensions W x H x D: 199 x 85 x 1... More
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Width: 199 mm. Form: Rec...
€56,06 €46,33 €50,70 €41,90
You save 10%
GRANIT Relays make contact 12 V, 30 A, without bracket, 5-pin, 6,3 mm
GRANIT
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm.
€29,20 €24,13
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
You save 23%
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 62 | Length (mm): 203 | Weight (g): 400 | Connection thread E: 3/8"" | Dimensions... More
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 6...
€56,19 €46,44 €53,35 €44,09
You save 5%
SANDEN Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, PV4, 190 ccm oil
SANDEN
Fixing: DM | Reference no.: 8279 | Pulley Ø (mm): 112 | Refrigerant: R 134a | Nominal voltage (V): 12 | Connection: PV4 | For compressor: SD7H15 | Oi... More
Fixing: DM | Reference no.: 8279 | Pulley Ø (mm): 112 | Refrigerant: ...
€646,14 €534,00 €613,80 €507,27
You save 5%
GRANIT Door contact switch 12 V / 24 V, continuous load 2 A
GRANIT
Version: 12 V / 24 V continuous load 2 A More
Version: 12 V / 24 V continuous load 2 A
€35,70 €29,50
LUK Pilot bearing 17 x 47 x 14 mm
LUK
Dimensions: 17 x 47 x 14 mm. Menke no.: 167836. More
Dimensions: 17 x 47 x 14 mm. Menke no.: 167836.
€32,31 €26,70 €30,65 €25,33
You save 5%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.306,80 €1.080,00 €1.050,65 €868,31
You save 20%
Dayco Multi-rib belt Powerband 8 ribs, 1385 mm
Dayco
Length: 1385 mm. Ribs: 8 n. More
Length: 1385 mm. Ribs: 8 n.
€50,40 €41,65 €47,85 €39,55
You save 5%
Radiator cap Ø 56 mm, height 19 mm
Neck Ø: 56 mm. Height: 19 mm. More
Neck Ø: 56 mm. Height: 19 mm.
€40,17 €33,20 €38,15 €31,53
You save 5%
Optibelt Powerband multi-rib belt 8 ribs New Holland, Case IH, Steyr
€88,04 €72,76 €83,60 €69,09
You save 5%
GRANIT Spacer 25 x 42 x 24 mm Case IH, Fiat, New Holland
GRANIT
Dimensions: 25 x 42 x 24 mm. More
Dimensions: 25 x 42 x 24 mm.
€26,00 €21,49
GRANIT Sealing ring lift arm shaft 23 x 37 x 11 mm Ford, Case IH, Fiat, New Holland
GRANIT
Dimensions: 23 x 37 x 11 mm. More
Dimensions: 23 x 37 x 11 mm.
€24,15 €19,96
GRANIT Sealing ring piston 98 x 3,6 mm Ford, Case IH, Fiat, Steyr, New Holland
GRANIT
Dimensions: 98 x 3.6 mm. More
Dimensions: 98 x 3.6 mm.
€2,86 €2,36
GRANIT Spring fender right Case IH, Steyr, New Holland
€63,98 €52,88 €60,75 €50,21
You save 5%
Sauermann Drawbar inner part 320 mm, coupling pin 31 mm, 2000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 80,4 kN. Colour: Black. More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecti...
€686,31 €567,20 €651,95 €538,80
You save 5%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.621,20 €1.339,83
Wiper motor windshield 12 V, angle 90° Case IH, New Holland
Volts: 12. Angle: 90 °. More
Volts: 12. Angle: 90 °.
€399,32 €330,02 €361,25 €298,55
You save 10%
Push button switch PTO shaft, connection cable with plug
Version: PTO (PTO shaft switch), With mechanical control units, Connection cable with plug. More
Version: PTO (PTO shaft switch), With mechanical control units, Connec...
€132,85 €109,79 €120,15 €99,30
You save 10%
Showing 49 - 72 of 208

Case IH JXU 95 parts

Replacing the clutch on a JXU 95 means splitting the tractor, and nobody wants to do that twice. It pays to order everything that belongs to the clutch in one go. This page lists more than 200 replacement parts for the Case IH JXU 95, with makers including LUK, GRANIT, Sauermann, ROCKINGER and GRAMMER.

Doing the clutch once

For the travel clutch there are clutch plates with a torsion damper, a single clutch pressure assembly and a thrust bearing. Fit a new plate but leave the old thrust bearing in, and it will often start whining again before long. Replace plate, pressure assembly and bearing together, check the flywheel face for scoring and put a light film of grease on the input shaft splines.

If there is oil on the old plate, trace the leak first, or the new clutch will soon slip as well. Sealing rings and seals for several positions are also on this page, including a piston sealing ring and a thermostat gasket.

Cab, electrics and hitching

For the cab there are gas struts for the roof window, seals for the front and rear window hinges, a mirror and a GRAMMER Compacto seat. The electrical side includes an alternator, a contact switch, a rear light and a PTO sensor with connecting cable and plug. If the PTO drops out without warning, check that plug and cable before anything else.

At the back, drawbars and a Piton Fix fit the hitch rail.

The seat deserves attention too. Worn suspension is more than a comfort issue, as your back then takes every jolt. On the Compacto seat you set the suspension to your own weight, and it is worth retightening the mounting bolts after a few hours of use. As for the roof window, once it will not stay open on its own the gas strut has had its day.

Finding the matching part

Start at the type plate and make sure the tractor is a JXU 95. For clutch parts, look for the number on the pressure assembly or plate, and count the splines if in doubt. With seals, write down where the old one was fitted.

The JXU 95 belongs to a range of types that each have their own parts page:

For items that apply across the brand, see Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart