Browse more than 60 parts that fit the Case IH Luxxum 100, including trailer couplings, electrics and components for the steering and front axle.
On a Luxxum 100 the first things to need attention are rarely the big assemblies. It is the parts you touch every day: the buttons on the dash, the rear window handle, a mirror arm that met one branch too many and the drawbar that pulls the tipper. This page lists more than 60 parts that fit the Case IH Luxxum 100, and plenty of them sit in exactly those places.
Many switch faults on a hard working tractor come down to a worn contact or a cracked housing, and the fix is a straight swap. For the Luxxum 100 there is a push button switch for the front PTO supplied with cable and plug, rocker switches for raising and lowering the rear linkage, a hand brake switch and a contact switch. Disconnect the battery before you pull a switch out of the panel, and check the plug on the back before ordering. A button can fit the dash perfectly and still not match your wiring loom.
Manufacturers include GRANIT, Walterscheid, Scharmüller, ZF and LUK.
Start with the type plate and make sure it really reads Luxxum 100. If you still have the worn part, turn it over and look for a stamped or printed reference number. Comparing that number with the part on this page tells you more than any photo can. On the air brake connector heads, yellow is the brake line and red the supply line, so match the colour when you replace one. A hissing sound when you couple up usually means the small rubber seal inside the head has gone hard. Keep the dust cover closed when nothing is coupled and the seal lasts far longer.
If you also run another Luxxum, each type has its own page with the parts that fit it: Case IH Luxxum 110 and Case IH Luxxum 120. Check each part against your own model there rather than assuming it carries over. For every other tractor from the brand, head to Case IH parts.
