Menu
EUR

Case IH Maxxum 135 tractor parts & technical data

This selection for the Case IH Maxxum 135 holds more than 140 parts. Trailer couplings, electrics, and steering and front axle parts top the list.

143 parts found for Case IH Maxxum 135
Show:
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€561,80 €464,30
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.379,23 €1.139,86 €1.219,75 €1.008,06
You save 12%
Scharmüller Drawbar frame 16 kN, rail 200 mm, guide 25 mm, pin Ø 16 mm
Scharmüller
Guide width (mm): 25 | Load capacity (kg): 500 | Colour: Kubota grey | Version: Prepared for drawbar | Detent pin Ø (mm): 16 | Category: Bearing supp... More
Guide width (mm): 25 | Load capacity (kg): 500 | Colour: Kubota grey |...
€769,00 €635,54
GRANIT Alternator 14 V, 120 A, flange 83 mm, Case IH, New Holland, Steyr
GRANIT
Pulley Ø (mm): 61.0 | Direction of rotation: ↻ | Flange size (mm): 83,0 | Nominal voltage (V): 14 | Belt tension hole Ø / R (mm): M8 / 86,0 | Addi... More
Pulley Ø (mm): 61.0 | Direction of rotation: ↻ | Flange size (mm): ...
€241,75 €199,79 €229,65 €189,79
You save 5%
PROBOSS Seat AS3520 air suspended 520 mm, 12 V IHC, Steyr, New Holland
PROBOSS
- Air suspension with 12V compressor - Fore/aft isolator - Continuous height adjustment - Longitudinal adjustment - Backrest tilt adjustment - Mechani... More
- Air suspension with 12V compressor - Fore/aft isolator - Continuous ...
€1.742,40 €1.440,00
GRANIT Ball joint taper 20 - 22,3 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
GRANIT
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,3 mm. Taper: 20 - 22,3 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,3 mm. T...
€34,33 €28,37 €32,60 €26,94
You save 5%
Vibration damper Case IH Farmall 85C-115C, Steyr Profi 6125, 6140
€104,75 €86,57 €99,50 €82,23
You save 5%
Rail pressure sensor Case IH, Steyr, New Holland
€305,28 €252,30 €290,00 €239,67
You save 5%
CBM Mechanical top link cat. 3, 647 - 913 mm, M36 x 3
CBM
I: M36 x 3 mm. A cat.: 28. B cat.: 3 / 60. C: 410 mm. D: 647 - 913 mm. K: 65 mm. H: 65 mm. Type: Tail hook/clevis joint. Top link type: mechanical. More
I: M36 x 3 mm. A cat.: 28. B cat.: 3 / 60. C: 410 mm. D: 647 - 913 mm....
€400,21 €330,75 €380,15 €314,17
You save 5%
Fender bracket left complete Maxxum 115-150, Puma CVX 140-175
€597,24 €493,59 €540,35 €446,57
You save 10%
Walterscheid Ball insert system 80, shank 60 x 60 mm, working length 222 mm
Walterscheid
Shaft cross section W x H: 60 x 60 mm. Overhang: 222 mm. Hole spacing: 133 mm. Hole: 25,2 mm. Colour: Yellow. Description: The model has an integrated... More
Shaft cross section W x H: 60 x 60 mm. Overhang: 222 mm. Hole spacing:...
€2.299,61 €1.900,50 €1.806,80 €1.493,22
You save 21%
Sauermann Drawbar 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN, drawbar eye Ø 40 mm
Sauermann
Ø 40 mm drawbar eye, Ø 38 mm pin More
Ø 40 mm drawbar eye, Ø 38 mm pin
€840,95 €695,00 €798,90 €660,25
You save 5%
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Scharmüller
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø (mm): 25 | Colour: Black | Load capacity (kg): 2000 | Plate height (... More
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | De...
€1.052,10 €869,50
GRANIT Cylinder hydraulic steering Case IH, New Holland
€435,54 €359,95 €413,75 €341,94
You save 5%
Seal kit hydraulic steering Case IH, New Holland
€103,21 €85,30 €98,00 €80,99
You save 5%
Ball joint 106 mm, taper 20 - 22 mm, M18 x 1,5, M24 x 1,5
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper...
€34,65 €28,64
Ball joint 80 mm, M27 x 1,5, 1 1/4" x 12, taper 31 - 35 mm
A: 80 mm. C: M27 x 1,5 mm. D: 1 1/4" x 12 mm. E: 31 mm. F: 35 mm. Taper: 31 - 35 mm. More
A: 80 mm. C: M27 x 1,5 mm. D: 1 1/4" x 12 mm. E: 31 mm. F: 35 mm. Tape...
€72,90 €60,25 €69,25 €57,23
You save 5%
GRANIT Ring gear Ø 384/410 mm, 127 teeth Case IH, New Holland
GRANIT
Version: Ø 384/410 mm, 127 teeth. More
Version: Ø 384/410 mm, 127 teeth.
€272,49 €225,20 €258,85 €213,93
You save 5%
Cylinder head gasket 1,1 mm thick New Holland, Steyr, Case IH
€121,42 €100,35 €115,30 €95,29
You save 5%
GRANIT Pressure pipe Tector 6 / 7 Case IH, Steyr, New Holland
GRANIT
Installation location: Tector 6 / 7. More
Installation location: Tector 6 / 7.
€52,65 €43,51 €50,00 €41,32
You save 5%
Radiator hose, bottom Ø 50 mm, 329 mm Case IH, New Holland, Steyr
Inner Ø: 50 mm. Length: 329 mm. More
Inner Ø: 50 mm. Length: 329 mm.
€41,75 €34,50
Fan clutch VAR - 758700 Steyr, New Holland, Case IH
€754,04 €623,17 €716,30 €591,98
You save 5%
Cooling fan electric Ø 550 mm Steyr, New Holland, Case IH
€1.101,57 €910,39 €1.046,45 €864,83
You save 5%
Showing 49 - 72 of 143

Case IH Maxxum 135 parts for electrics, steering and hitching

A warning on the display, air conditioning that only blows warm air, steering that feels heavier than it used to. On a Maxxum 135 many repairs start with a complaint like that. This page holds more than 140 parts that fit this model, from GRANIT, Scharmüller, GRAMMER, MAHLE, Sauermann and others.

Sensors, alternator and air conditioning

On the electrical side there are NOX sensors for the catalyst outlet, temperature sensors, alternators and air conditioning compressors. A NOX sensor is often replaced too soon. Check the connector, the wiring along the exhaust and the fuse first, because a chafed cable throws the same fault code as a failed sensor. A new aircon compressor should always go in with a new receiver drier, and the system needs flushing and refilling with the correct amount of oil and refrigerant. Skip that and debris from the old circuit will quickly ruin the new compressor. Before swapping the alternator, disconnect the negative battery lead, and check the belt tension once it is back in place.

Hydraulic steering

For the steering there are hydraulic steering cylinders, seal kits for overhauling them, and ball joints. If a steering cylinder leaks at the rod, a seal kit is usually enough, provided the rod itself is smooth and shows no pitting. Keep everything clean while you work, since a single grain of sand under a new seal can undo the job within weeks. A ball joint with play shows itself as a tractor that no longer holds a straight line.

Hitch, seat and finding the right version

At the back there are hitches, hitch frames, top hitches, drawbars and adapter plates. Measure the rail width and pin on your own tractor before choosing a hitch. In the cab the range covers Maximo tractor seats from GRAMMER and heated air suspended seats from PROBOSS. If an air seat keeps sinking slowly, the air spring or one of its small hoses is usually leaking. Listen for the hiss with the compressor running before you write off the whole seat. A new hitch frame or top hitch lets you rebuild the rear coupling when the old frame shows cracks or its guides are worn out.

The rating plate and serial number tell you which version you need. If the old part still has a reference number on it, compare it with the details shown for the product. The Maxxum line includes other models, each with its own page so you can check per tractor what fits: Maxxum 110, Maxxum 115, Maxxum 125, Maxxum 130, Maxxum 140 and Maxxum 150. If a second Case IH tractor sits in your yard, head to Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart