Menu
EUR

Case IH MX 90C tractor parts & technical data

Electrics, trailer couplings, and steering and front axle parts are some of the groups for the Case IH MX 90C. The full overview contains more than 250 parts.

279 parts found for Case IH MX 90C
Show:
Start safety switch PTO M16 x 2 Case IH
Version: PTO shaft (contact function) Thread: M16 x 2 With plug connection More
Version: PTO shaft (contact function) Thread: M16 x 2 With plug connec...
€116,18 €96,01
LUK Torsion damper Ø 354 mm, 38,3 x 45,6, 13 teeth Case IH MX 80C - 90C
LUK
Tooth profile: 38.3x45.6 | Number of teeth: 13 | Diameter (mm): 354 More
Tooth profile: 38.3x45.6 | Number of teeth: 13 | Diameter (mm): 354
€557,16 €460,46 €512,59 €423,63
You save 8%
Axial joint 175 mm, M20 x 1,5, M18 x 1,5, 32 °
A: 175 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °. More
A: 175 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€37,68 €31,14 €34,67 €28,65
You save 8%
Axial joint 210 mm, M22 x 1,5, M24 x 1,5, 32 °
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °.
€88,07 €72,79 €81,02 €66,96
You save 8%
Ball joint 245 mm, taper 24 - 26 mm, M20 x 1,5 / M24 x 1,5
A: 245 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 245 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€78,52 €64,89 €72,24 €59,70
You save 8%
Ball joint 263 mm, taper 23,5 - 26,5 mm, M20 x 1,5 / M24 x 1,5
A: 263 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 263 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€80,00 €66,12 €73,60 €60,83
You save 8%
Ball joint 382 mm, M14 x 1,5, 20,5 mm, taper 15,6 - 17,9 mm
A: 382 mm. C: M14 x 1,5 mm. D: 20,5 mm. E: 15,6 mm. F: 17,9 mm. Taper: 15,6 - 17,9 mm. More
A: 382 mm. C: M14 x 1,5 mm. D: 20,5 mm. E: 15,6 mm. F: 17,9 mm. Taper:...
€62,98 €52,05 €57,94 €47,89
You save 8%
Foot throttle cable Case IH MX 80C-90C
€237,38 €196,18 €218,39 €180,49
You save 8%
V-belt set Case IH XPZ1800, CX 70-100, MX 80C-90C
€41,46 €34,26 €38,14 €31,52
You save 8%
Tank cap reservoir thread 57 mm
Version: Thread 57 mm, For expansion tank. More
Version: Thread 57 mm, For expansion tank.
€22,95 €18,97
Thermostat Ø 54 mm, 83 °C Case IH
Ø: 54 mm. Temperature: 83 °C. More
Ø: 54 mm. Temperature: 83 °C.
€29,73 €24,57
Flame glow plug 12 V, 12,5 A, thread 7/8" - 14 UNF / 3/8" - 24 UNF
€34,38 €28,41 €31,63 €26,14
You save 8%
Oil sump gasket 210 x 600 x 2 mm engine Perkins 4.212
Dimensions: 210 x 600 x 2 mm. More
Dimensions: 210 x 600 x 2 mm.
€8,35 €6,90
Feed pump including gasket 4 bores, hole spacing 25 x 44 mm
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacing: 44 mm, Flange to lever end: 34 mm. More
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacin...
€40,18 €33,21 €36,97 €30,55
You save 8%
Yoke M24 x 3, yoke inner 37 mm, bore Ø 20 mm
Dimensions: Thread = M24 x 3, Bore Ø = 20, Clevis inside = 37 mm. More
Dimensions: Thread = M24 x 3, Bore Ø = 20, Clevis inside = 37 mm.
€69,03 €57,05 €63,51 €52,49
You save 8%
Lift rod 530 - 675 mm, clevis width 30 mm Case IH
Dimensions: Length: 530 - 675, Clevis width: 30 mm. More
Dimensions: Length: 530 - 675, Clevis width: 30 mm.
€423,97 €350,39 €390,05 €322,36
You save 8%
Mirror 145 x 195 mm Case IH, New Holland
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. More
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€58,03 €47,96 €53,39 €44,12
You save 8%
HD-telescopic mirror bracket left Ø 19 mm, 420 - 665 mm Case IH
Ø: 19 mm. Length: 420 mm. Length max.: 665 mm. Installation location: Left. More
Ø: 19 mm. Length: 420 mm. Length max.: 665 mm. Installation location:...
€143,36 €118,48 €131,89 €109,00
You save 8%
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesive with a safe drive away time of 2 hours. Our new product is the per... More
Colour: Black. Description: TEROSON® BOND 120 is a high-performance g...
€29,49 €24,37
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
You save 21%
Rotary switch windshield wiper, without knob, with connector
Version: For windscreen wipers, With cable and connecting plug. More
Version: For windscreen wipers, With cable and connecting plug.
€538,10 €444,71 €495,05 €409,13
You save 8%
MANN-FILTER Air filter C17337/2, AF25557, inner CF990/2
MANN-FILTER
Suitable secondary element 565CF990.2 More
Suitable secondary element 565CF990.2
€44,60 €36,86
Relays PTO shaft 14 V, 10 W, 10 VA Case IH MX 80C - MX 170 Maxxum
Version: 14 V / 10 W 10 VA For PTO shaft (operation) More
Version: 14 V / 10 W 10 VA For PTO shaft (operation)
€277,50 €229,34 €196,90 €162,73
You save 29%
Maintenance switch koelvloeistofpeil Case IH CX 50 - MX 170 Maxxum
Version: For coolant level Connection cable with plug More
Version: For coolant level Connection cable with plug
€204,29 €168,83 €187,95 €155,33
You save 8%
MAHLE Starter motor with reduction 12 V, 4,2 kW, 10 teeth, mounting angle l 40
€416,25 €344,01 €249,31 €206,04
You save 40%
MAHLE Starter motor 12 V, 2,8 kW, 10 teeth, 253 mm, clockwise
€462,79 €382,47 €277,18 €229,08
You save 40%
King pin Carraro front axle 143605
€45,33 €37,46 €41,70 €34,47
You save 8%
Input shaft sealing ring 35 x 92/98 x 12/27 mm Carraro front axle 145706
Ball joint with axial joint 315 mm, M18 x 1,5, taper 19,9 - 22,25 mm
€126,20 €104,30 €116,10 €95,95
You save 8%
Potentiometer Carraro front axle 145109
€257,70 €212,98 €237,08 €195,94
You save 8%
Axial joint 210 mm, M22 x 1,5, M24 x 1,5 L, 38 °, Ø 56 mm, Ø 40 mm
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 L mm. F: 38 °. Ø B: 56 mm. Ø E: 40 mm. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 L mm. F: 38 °. Ø B: 56 mm. ...
€63,54 €52,51 €58,46 €48,31
You save 8%
Axial joint 210 mm, M22 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø E: 40 mm. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø...
€46,98 €38,83 €43,22 €35,72
You save 8%
Ball joint 430 mm, M22 x 1,5, M22 x 1,5, taper 23 - 25 mm
A: 430 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23 mm. F: 25 mm. Taper: 23 - 25 mm. More
A: 430 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23 mm. F: 25 mm. Taper...
€170,61 €141,00 €156,96 €129,72
You save 8%
Reservoir Case IH Maxxum 5120-5250, CX 50-100, MX 80C-135
€83,84 €69,29 €77,13 €63,75
You save 8%
Clutch pedal return spring 75,5 mm, Ø 3,6 mm Case IH MX 80C-90C
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.088,39 €899,50 €838,59 €693,05
You save 23%
Inlet/outlet gasket Case IH C 70-90, CX 70-100, MX 80C-90C
€51,88 €42,88 €47,73 €39,45
You save 8%
V-belt set without idler pulley Case IH CX 70-100, MX 80C-90C
Version: Without idler pulley. More
Version: Without idler pulley.
€37,19 €30,73
Radiator cap grommet-Ø 57 mm, height 27 mm
Neck Ø: 57 mm. Height: 27 mm. More
Neck Ø: 57 mm. Height: 27 mm.
€12,54 €10,36
Showing 97 - 144 of 279

Case IH MX 90C parts: steering joints, lift shaft and electrics

This page brings together more than 250 parts for the Case IH MX 90C, from GRANIT and from makers such as HELLA, Scharmüller, ROCKINGER and MAHLE. They cover the spots where this tractor tends to need attention once it has some hours behind it.

Much of what you will find here is aimed at jobs you can tackle in your own workshop. Swapping a ball joint, renewing a seal on the lift arm shaft or replacing a dashboard switch needs no special tools, just the right part for the MX 90C.

Ball joints and axial joints

Steering wear shows up as a knock when someone rocks the wheel left and right with the tractor standing still. Put your hand on each ball joint and axial joint while that happens and you will feel which one has play. Both types are available here. After replacing either of them, reset the toe-in, otherwise the front tyres will scrub and wear unevenly.

Lift arm shaft, bushes and seals

Around the lift arm shaft there are bushes, seals and O-rings, such as a front right bush for the shaft and a piston O-ring that fits Maxxum and MX tractors. Sealing rings include one for the front of the crankshaft. When you replace a shaft seal, check the running surface on the shaft first. A groove worn into it will make even a new seal weep within weeks.

Starting, charging and switches

Alternators and starter motors take care of charging and starting. In the cab you will find rocker switches, for example the one for the front PTO in the dashboard, along with rotary switches and potentiometers. A worn potentiometer often shows itself as a linkage or PTO that responds in jerks.

Cab and hitch

Cab hinges, such as the upper right hinge on the cab door, and gas struts keep the door and windows where they belong. For the rear there are drawbars with a ball on a rail and flange hitches.

How to match a part

Start with the type plate to confirm the tractor is an MX 90C. Many old parts have a reference number stamped or printed on them, and that is the safest point of comparison. The MX 90C belongs to the Case IH MX range. From that range the Case IH MX 200 Magnum has its own page too, useful if you maintain both. Every other model of the make is reachable through Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart