Menu
EUR

Case IH MXU 100 tractor parts & technical data

For the Case IH MXU 100 from the MXU series there are more than 250 matching parts on this page. Browse trailer couplings, electrics or engine parts.

266 parts found for Case IH MXU 100
Show:
Scharmüller Drawbar manual rail width 330 mm, coupling pin 31 mm, 82,4 kN
12%
Scharmüller
Drawbar manual rail width 330 mm, coupling pin 31 mm, 82,4 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€637,08 €526,51 €563,40 €465,62
 
GRANIT Spiegelarm left Case IH, New Holland
5%
GRANIT
Spiegelarm left Case IH, New Holland
€184,59 €152,55 €175,35 €144,92
 
Pressure switch air conditioning line with union nut, connection cable and plug
5%
Pressure switch air conditioning line with union nut, connection cable and plug
Version: Connection with union nut, Connection cable and plug.
€130,07 €107,50 €123,55 €102,11
 
GRANIT Sensor steering angle front axle, connection cable with plug
10%
GRANIT
Sensor steering angle front axle, connection cable with plug
Version: Steering angle (front axle), Connection cable with plug.
€529,16 €437,32 €478,75 €395,66
 
GRANIT Sensor power take-off speed 23,5 mm with connection cable and plug
GRANIT
Sensor power take-off speed 23,5 mm with connection cable and plug
Version: Sensor, PTO shaft speed, 23.5 mm long, Connection cable with plug.
€63,15 €52,19
 
GRANIT Starter switch without key, connection cable with plug
5%
GRANIT
Starter switch without key, connection cable with plug
Version: Connection cable with plug, Key 50717018.
€96,81 €80,01 €91,95 €75,99
 
Cobo Number plate light W5W, 12 V, AMP connection
Cobo
Number plate light W5W, 12 V, AMP connection
Bulb: 12V5WGLLS / W5W. Connection: AMP plug connection. Nominal voltage: 12 V. T...
€32,60 €26,94
 
Cobo Indicator/position light oval PY21W, R5W left
5%
Cobo
Indicator/position light oval PY21W, R5W left
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation location: Left. C...
€107,88 €89,16 €102,45 €84,67
 
Scharmüller Drawbar frame 82,4 kN, rail width 330 mm, nose weight 3000 kg
Scharmüller
Drawbar frame 82,4 kN, rail width 330 mm, nose weight 3000 kg
Detent pin Ø (mm): 25 | Lock: Ball 80 manual | Category: Bearing supports | Guid...
€2.156,70 €1.782,40
 
MAHLE Alternator 14 V, 120 A, fastening 82 / 8,2 / 86 mm, pulley-Ø 61 mm
38%
MAHLE
Alternator 14 V, 120 A, fastening 82 / 8,2 / 86 mm, pulley-Ø 61 mm
Pulley Ø (mm): 61.0 | Flange size (mm): 82,0 | Nominal voltage (V): 14 | Mountin...
€502,92 €415,64 €314,30 €259,75
 
FEBI Gas strut door 850 N, 213 mm, stroke 44 mm Steyr, New Holland
56%
FEBI
Gas strut door 850 N, 213 mm, stroke 44 mm Steyr, New Holland
To fit as: Case IH Door
€65,34 €54,00 €28,77 €23,78
 
Outer plate hand brake Case IH, New Holland, Steyr
5%
Outer plate hand brake Case IH, New Holland, Steyr
€120,93 €99,94 €114,85 €94,92
 
GRANIT Brake lining hand brake pad on both sides Case IH, Steyr, New Holland
5%
GRANIT
Brake lining hand brake pad on both sides Case IH, Steyr, New Holland
€54,39 €44,95 €51,65 €42,69
 
Scharmüller Drawbar JSV K80 rail 295 mm, pin Ø 25 mm, 2000 kg, black
12%
Scharmüller
Drawbar JSV K80 rail 295 mm, pin Ø 25 mm, 2000 kg, black
Rail width: 295 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000...
€1.395,13 €1.153,00 €1.233,85 €1.019,71
 
Dayco V-belt air conditioning 990 mm, 4 ribs Case IH, Steyr, New Holland
Dayco
V-belt air conditioning 990 mm, 4 ribs Case IH, Steyr, New Holland
Length: 990 mm. Ribs: 4 n.
€30,95 €25,58
 
GRANIT Engine preheater, complete connection 57,8 mm with O-ring and flange
5%
GRANIT
Engine preheater, complete connection 57,8 mm with O-ring and flange
Connection: 57,8 mm, with O-Ring and flange.
€482,46 €398,73 €458,30 €378,76
 
Vibration damper Case IH Farmall 85C-115C, Steyr Profi 6125, 6140
5%
Vibration damper Case IH Farmall 85C-115C, Steyr Profi 6125, 6140
€104,75 €86,57 €99,50 €82,23
 
GRANIT Fan clutch M30 x 2 L, hole spacing-Ø 96,77 mm
5%
GRANIT
Fan clutch M30 x 2 L, hole spacing-Ø 96,77 mm
Thread: M30 x 2 L. PCD: 96,77 mm.
€216,15 €178,64 €205,30 €169,67
 
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Ø: 98.59 x 88.27 x 5.16 mm.
€4,24 €3,50
 
Thermostat Ø 54 mm Case IH, Steyr, New Holland
Thermostat Ø 54 mm Case IH, Steyr, New Holland
Ø: 54 mm.
€32,70 €27,02
 
Showing 169 - 192 of 266

Front axle to drawbar: Case IH MXU 100 parts

Play in the steering wheel of an MXU 100 usually traces back to worn ball joints, and that is one of the jobs this page helps with. In total there are more than 250 parts here for the Case IH MXU 100, spread over the front axle, the hitch, the engine and the cab.

Steering and hitch

Ball joints for the steering are listed, and the thread and taper on the old joint tell you which new one you need. At the rear there are drawbars, drawbar parts and adapter plates, with Scharmüller among the brands, so you can renew a worn hitch or switch to another coupling system. Measure the rail width and the bolt pattern of the plate currently fitted before you order an adapter plate.

Engine: belt, sensors and the torsion damper

A rattle between the engine and the gearbox at idle, or a clunk when you pull away, often points to the torsion damper. It absorbs engine vibration before it reaches the driveline, and when its springs wear you can hear it. A torsion damper for this type is on this page.

The multi-rib belt at the front drives several accessories. Take a photo of how it runs over the pulleys before removing it, because the routing is not always obvious. Then spin the tensioner by hand. If it feels rough or makes a noise, replace it along with the belt. Sensors, seal kits, sealing rings and a seal for the lift arm shaft complete this group, with FEBI among the brands.

Seats from GRAMMER and PROBOSS

For the cab there are air suspended tractor seats such as the Maximo Dynamic from GRAMMER, and PROBOSS seats including a heated version. After a long day, you notice whether a seat still floats the way it should. With an air suspended seat, check that the compressor still gets power before fitting the new one, and note how the old console is bolted to the floor. Gas struts, mirrors and rocker switches are here too.

Making sure it is the right MXU

Look at the plate to confirm it is an MXU 100, and check the old part for a reference number on the housing or a label. If you also run another model from the same series, each one has its own page: Case IH MXU 110, Case IH MXU 115, Case IH MXU 125 and Case IH MXU 135. Everything else from the brand sits under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart