Menu
EUR

Case IH MXU 125 tractor parts & technical data

Choose from more than 250 parts for the Case IH MXU 125. Trailer couplings, electrics and engine components sit together on this page, which saves you time.

264 parts found for Case IH MXU 125
Show:
GRANIT PTO shaft end piece 182,6 mm, 1 3/8 inch 21 splines, 1000 rpm.
5%
GRANIT
PTO shaft end piece 182,6 mm, 1 3/8 inch 21 splines, 1000 rpm.
Version: Length 182.6 mm, 1 3/8", 21 grooves, 1000 rpm. Menke no.: 125042.
€329,35 €272,19 €312,85 €258,55
 
GRAMMER Seat Maximo Dynamic DDS MSG95AL/741, 550 mm
GRAMMER
Seat Maximo Dynamic DDS MSG95AL/741, 550 mm
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery typ...
€3.081,10 €2.546,36
 
Scharmüller Drawbar ball 50, rail 295 mm, pin Ø 25 mm, 200 kg, black
12%
Scharmüller
Drawbar ball 50, rail 295 mm, pin Ø 25 mm, 200 kg, black
Rail width: 295 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 200 ...
€813,42 €672,25 €719,35 €594,50
 
GRAMMER Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
5%
GRAMMER
Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholstery type: ...
€6.800,20 €5.620,00 €6.460,15 €5.338,97
 
Mirror Case IH Farmall 85C, Puma 230 CVX, New Holland T4.85-T4.95
10%
Mirror Case IH Farmall 85C, Puma 230 CVX, New Holland T4.85-T4.95
€72,68 €60,07 €65,75 €54,34
 
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
23%
ROCKINGER
Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.498,36 €1.238,31 €1.147,30 €948,18
 
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
12%
Scharmüller
Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.379,23 €1.139,86 €1.219,75 €1.008,06
 
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
16%
Scharmüller
Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.108,13 €915,81 €933,36 €771,37
 
Sensor wheel speed Hall Matteffekt, connection cable with plug
5%
Sensor wheel speed Hall Matteffekt, connection cable with plug
Version: For speed, clutch block transmission (Hall effect), Connection cable wi...
€112,05 €92,60 €106,40 €87,93
 
Number plate light 12V5WGLLS / W5W, 12 V
Number plate light 12V5WGLLS / W5W, 12 V
Bulb: 12V5WGLLS / W5W. Nominal voltage: 12 V. Type: Bulb.
€39,20 €32,40
 
HELLA Multifunction relay N/O-contact 12 V, 40 A, 4-pin, 6,3 mm
HELLA
Multifunction relay N/O-contact 12 V, 40 A, 4-pin, 6,3 mm
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal 6.3 mm.
€18,15 €15,00
 
Stabilizer three-point Case IH, Steyr, 690 g
5%
Stabilizer three-point Case IH, Steyr, 690 g
€229,67 €189,81 €218,15 €180,29
 
Wabco Connector head M22 x 1,5 black aluminum with valve, 8 bar
5%
Wabco
Connector head M22 x 1,5 black aluminum with valve, 8 bar
Operating pressure max. (bar): 8 | Version: Black, aluminium, with valve, for ve...
€92,46 €76,41 €87,80 €72,56
 
DANA Spicer Synchro unit, complete 16 x 16 / 16 x 17 and 24 x 24, Ø 90 mm
10%
DANA Spicer
Synchro unit, complete 16 x 16 / 16 x 17 and 24 x 24, Ø 90 mm
Ø (mm): 90
€863,02 €713,24 €780,80 €645,29
 
CARLISLE Internal plate PTO clutch 1,8 mm, 91 - 140 mm, 32 teeth
5%
CARLISLE
Internal plate PTO clutch 1,8 mm, 91 - 140 mm, 32 teeth
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth
€25,24 €20,86 €23,95 €19,79
 
Filter dryer Ø 63,5 mm, 152 mm, connection thread M/F
5%
Filter dryer Ø 63,5 mm, 152 mm, connection thread M/F
Weight (g): 666 | Dimensions (mm): - | Outer Ø (mm): 63,5 | Material: Steel | Th...
€49,10 €40,58 €46,60 €38,51
 
PROBOSS Seat AS3520 air suspended 520 mm, 12 V IHC, Steyr, New Holland
PROBOSS
Seat AS3520 air suspended 520 mm, 12 V IHC, Steyr, New Holland
- Air suspension with 12V compressor - Fore/aft isolator - Continuous height adj...
€1.742,40 €1.440,00
 
FEBI Multi-rib belt 8 ribs Case IH, Steyr, New Holland
63%
FEBI
Multi-rib belt 8 ribs Case IH, Steyr, New Holland
To fit as: Case IH
€47,53 €39,28 €17,58 €14,53
 
GRANIT Tensioning pulley Ø 57 mm Case IH, New Holland
5%
GRANIT
Tensioning pulley Ø 57 mm Case IH, New Holland
€45,07 €37,25 €42,80 €35,37
 
Ball joint 80 mm, M27 x 1,5, 1 1/4" x 12, taper 31 - 35 mm
5%
Ball joint 80 mm, M27 x 1,5, 1 1/4" x 12, taper 31 - 35 mm
A: 80 mm. C: M27 x 1,5 mm. D: 1 1/4" x 12 mm. E: 31 mm. F: 35 mm. Taper: 31 - 35...
€72,90 €60,25 €69,25 €57,23
 
Compressed air sensor M12 x 1,5 Case IH, New Holland
Compressed air sensor M12 x 1,5 Case IH, New Holland
Connection: M12 x 1,5.
€278,45 €230,12
 
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
20%
ROCKINGER
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.306,80 €1.080,00 €1.050,65 €868,31
 
Dayco Multi-rib belt Powerband air brake system 4 ribs, 1083 mm
Dayco
Multi-rib belt Powerband air brake system 4 ribs, 1083 mm
Length: 1083 mm. Ribs: 4 n.
€34,15 €28,22
 
Tank cap grommet-Ø 55 mm
Tank cap grommet-Ø 55 mm
Neck Ø: 55 mm.
€18,75 €15,50
 
Showing 73 - 96 of 264

Case IH MXU 125 parts for hitching, seating and steering

On an MXU 125 the wear shows up first where the tractor works hardest every day: the hitch at the back, the seat under the driver and the joints in the steering. This page brings together more than 250 replacement parts that fit this Case IH tractor, from makers such as GRANIT, Scharmüller, ROCKINGER, GRAMMER and PROBOSS.

Hitches, drawbars and Piton Fix

For coupling up there are automatic hitches from ROCKINGER, drawbars and conversion kits, height adjustable adapter plates and the Piton Fix system from Scharmüller. The hitch slides into the rail on the frame and is held by a locking pin. Before ordering, measure the rail width and the pin diameter on your own tractor. If the guides in the rail are worn or burred, deal with that first, because a new hitch in a tired rail soon starts to rattle again.

Seat, cab and switches

For the driver there are Maximo tractor seats from GRAMMER and air suspended seats from PROBOSS, some of them heated. When swapping a seat, compare the bolt pattern of the base and the power lead for the seat compressor, so the new seat goes onto the existing console without drilling. The cab side also covers rocker switches, including the raise and lower switch for the rear linkage, mirrors, gas struts and fuel tank caps. One thing worth knowing about the cap: if its breather is blocked, the tank pulls a vacuum and the engine dies after a while as if the fuel filter were clogged. Crack the cap open and listen for air rushing in before you start changing filters.

Steering, driveline and choosing the right part

Underneath, the list runs to ball joints, sealing rings, O-rings, the torsion damper and the PTO speed sensor with its cable and plug. Checking a ball joint is a two person job: one rocks the steering wheel gently from side to side while the other holds the joint and feels for play. To pick the right version, start from the rating plate and serial number of the tractor. If the old part still carries a reference number, check it against the details given with the product on this page.

If you run more than one tractor from the MXU line, each model has its own page: MXU 100, MXU 110, MXU 115 and MXU 135. That way you order for each machine exactly what belongs on it. Other models from the brand are listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart