Menu
EUR

Case IH MXU 125 tractor parts & technical data

Choose from more than 250 parts for the Case IH MXU 125. Trailer couplings, electrics and engine components sit together on this page, which saves you time.

264 parts found for Case IH MXU 125
Show:
CARLISLE External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
5%
CARLISLE
External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm
€10,32 €8,53 €9,80 €8,10
 
GRANIT Contact switch driver’s seat with magnet, electric
GRANIT
Contact switch driver’s seat with magnet, electric
Version: Driver’s seat Switch assembly with magnet
€97,80 €80,83
 
Eaton Shift ring 616 g Case IH, Ford, New Holland, Steyr
5%
Eaton
Shift ring 616 g Case IH, Ford, New Holland, Steyr
Reference no.: E6NN7106AA
€114,83 €94,90 €109,00 €90,08
 
GRANIT Seal kit hydraulic steering Case IH, New Holland
5%
GRANIT
Seal kit hydraulic steering Case IH, New Holland
€45,80 €37,85 €43,50 €35,95
 
Ball joint 106 mm, taper 20 - 22 mm, M18 x 1,5, M24 x 1,5
5%
Ball joint 106 mm, taper 20 - 22 mm, M18 x 1,5, M24 x 1,5
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 ...
€57,56 €47,57 €54,65 €45,17
 
LUK Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
5%
LUK
Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
Number of teeth: 16. Tooth profile: 31X35.
€551,15 €455,50 €523,55 €432,69
 
LUK Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
5%
LUK
Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
Number of teeth: 16. Tooth profile: 31x35. Menke no.: 92343.
€734,02 €606,63 €697,30 €576,28
 
Compressed air sensor M12 x 1,5 Case IH, New Holland
Compressed air sensor M12 x 1,5 Case IH, New Holland
Connection: M12 x 1,5.
€278,45 €230,12
 
Outer plate hand brake Case IH, New Holland, Steyr
5%
Outer plate hand brake Case IH, New Holland, Steyr
€120,93 €99,94 €114,85 €94,92
 
Brake disc Ø 327 mm, thickness 10 mm, 12 teeth
5%
Brake disc Ø 327 mm, thickness 10 mm, 12 teeth
€233,24 €192,76 €221,55 €183,10
 
GRANIT Brake band PTO shaft Ø 210,1 x 19,1 x 1,5 mm Case IH, Ford
GRANIT
Brake band PTO shaft Ø 210,1 x 19,1 x 1,5 mm Case IH, Ford
Version: Ø 210.1 x 19.1 x 1.5 mm.
€37,75 €31,20
 
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.682,20 €1.390,25
 
Scharmüller Adapter plate rail width 295 mm, hole pattern 140 x 80 mm, M16
12%
Scharmüller
Adapter plate rail width 295 mm, hole pattern 140 x 80 mm, M16
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 295 mm. Hole pattern: 140 ...
€533,61 €441,00 €471,90 €390,00
 
Scharmüller Drawbar JSV K80 rail 295 mm, pin Ø 25 mm, 2000 kg, black
12%
Scharmüller
Drawbar JSV K80 rail 295 mm, pin Ø 25 mm, 2000 kg, black
Rail width: 295 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000...
€1.395,13 €1.153,00 €1.233,85 €1.019,71
 
BOSCH Injector Case IH MXU 110-135
BOSCH
Injector Case IH MXU 110-135
€585,75 €484,09
 
Borg Warner Fan clutch Ford, Case IH, Steyr, New Holland
12%
Borg Warner
Fan clutch Ford, Case IH, Steyr, New Holland
€329,00 €271,90 €288,75 €238,64
 
GRANIT Fan clutch M30 x 2 L, hole spacing-Ø 96,77 mm
5%
GRANIT
Fan clutch M30 x 2 L, hole spacing-Ø 96,77 mm
Thread: M30 x 2 L. PCD: 96,77 mm.
€216,15 €178,64 €205,30 €169,67
 
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Ø: 98.59 x 88.27 x 5.16 mm.
€4,24 €3,50
 
GRANIT Water pump with gasket Case IH, Steyr, New Holland
5%
GRANIT
Water pump with gasket Case IH, Steyr, New Holland
Reference no.: S.68286.
€93,30 €77,11 €88,60 €73,22
 
Idler pulley Ø 65 / 32 mm Case IH, Steyr, New Holland
5%
Idler pulley Ø 65 / 32 mm Case IH, Steyr, New Holland
€121,56 €100,46 €115,45 €95,41
 
GRANIT V-belt tensioner Ø 74 mm, width 34 mm
5%
GRANIT
V-belt tensioner Ø 74 mm, width 34 mm
Outer Ø: 74 mm. Width: 34 mm.
€153,37 €126,75 €145,70 €120,41
 
GRANIT Outlet valve Case IH, Steyr
GRANIT
Outlet valve Case IH, Steyr
€32,85 €27,15
 
GRANIT Metering unit with 3 fixing points Case IH, New Holland, Landini
5%
GRANIT
Metering unit with 3 fixing points Case IH, New Holland, Landini
€164,35 €135,83 €156,10 €129,01
 
Showing 145 - 168 of 264

Case IH MXU 125 parts for hitching, seating and steering

On an MXU 125 the wear shows up first where the tractor works hardest every day: the hitch at the back, the seat under the driver and the joints in the steering. This page brings together more than 250 replacement parts that fit this Case IH tractor, from makers such as GRANIT, Scharmüller, ROCKINGER, GRAMMER and PROBOSS.

Hitches, drawbars and Piton Fix

For coupling up there are automatic hitches from ROCKINGER, drawbars and conversion kits, height adjustable adapter plates and the Piton Fix system from Scharmüller. The hitch slides into the rail on the frame and is held by a locking pin. Before ordering, measure the rail width and the pin diameter on your own tractor. If the guides in the rail are worn or burred, deal with that first, because a new hitch in a tired rail soon starts to rattle again.

Seat, cab and switches

For the driver there are Maximo tractor seats from GRAMMER and air suspended seats from PROBOSS, some of them heated. When swapping a seat, compare the bolt pattern of the base and the power lead for the seat compressor, so the new seat goes onto the existing console without drilling. The cab side also covers rocker switches, including the raise and lower switch for the rear linkage, mirrors, gas struts and fuel tank caps. One thing worth knowing about the cap: if its breather is blocked, the tank pulls a vacuum and the engine dies after a while as if the fuel filter were clogged. Crack the cap open and listen for air rushing in before you start changing filters.

Steering, driveline and choosing the right part

Underneath, the list runs to ball joints, sealing rings, O-rings, the torsion damper and the PTO speed sensor with its cable and plug. Checking a ball joint is a two person job: one rocks the steering wheel gently from side to side while the other holds the joint and feels for play. To pick the right version, start from the rating plate and serial number of the tractor. If the old part still carries a reference number, check it against the details given with the product on this page.

If you run more than one tractor from the MXU line, each model has its own page: MXU 100, MXU 110, MXU 115 and MXU 135. That way you order for each machine exactly what belongs on it. Other models from the brand are listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart