Menu
EUR

Case IH Optum 270 tractor parts & technical data

This page brings together more than 120 parts that fit the Case IH Optum 270. They include trailer couplings, electrics and lighting, already filtered by model.

117 parts found for Case IH Optum 270
Show:
Track rod 1632 mm, 23,5 - 26,4 mm, 40 mm
A: 1632 mm. C: 23,5 - 26,4 mm. G: . E: 40 mm. More
A: 1632 mm. C: 23,5 - 26,4 mm. G: . E: 40 mm.
€396,00 €327,27 €376,20 €310,91
You save 5%
GRANIT Ring gear Ø 384/410 mm, 127 teeth Case IH, New Holland
GRANIT
Version: Ø 384/410 mm, 127 teeth. More
Version: Ø 384/410 mm, 127 teeth.
€272,49 €225,20 €258,85 €213,93
You save 5%
Scharmüller Adapter plate rail width 325 mm, hole pattern 140 x 80 mm, M16
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pattern: 140 x 80 mm. Guide width: 26 mm. Plate height: 133 mm. Thread: M16. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pat...
€531,07 €438,90 €469,65 €388,14
You save 12%
GRANIT Pressure pipe Tector 6 / 7 Case IH, Steyr, New Holland
GRANIT
Installation location: Tector 6 / 7. More
Installation location: Tector 6 / 7.
€52,65 €43,51 €50,00 €41,32
You save 5%
Lift arm right 490 - 610 mm, Ø-upper 16 mm, Ø-lower 19 mm
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis inside = 25 mm. Installation location: rechts. More
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis in...
€477,82 €394,89 €453,90 €375,12
You save 5%
Scharmüller Drawbar K80 manual, rail 325 mm, pin Ø 25 mm, 2000 kg, black
Scharmüller
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000 kg. D-value: 83,9 kN. Plate height: 133 mm. Colour: Black. Overhang:... More
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load cap...
€1.364,41 €1.127,61 €1.149,20 €949,75
You save 16%
GRANIT Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
GRANIT
Version: Rotation angle sensor (position), electronic linkage control, For clutch and brake operation. More
Version: Rotation angle sensor (position), electronic linkage control,...
€152,54 €126,07 €138,00 €114,05
You save 10%
GRANIT Contact switch mechanical brake light and start safety switch
GRANIT
Version: Brake light and start safety switch. More
Version: Brake light and start safety switch.
€33,55 €27,73 €31,85 €26,32
You save 5%
Scharmüller Hitch automatic 82,4 kN, rail 311 mm, locking pin Ø 22 mm
Scharmüller
Plate height (mm): 120 | Detent pin Ø (mm): 22 | D-value (kN): 82,4 | Rail width (mm): 311 | Load capacity (kg): 2000 | Load capacity (t): 2 | Guide ... More
Plate height (mm): 120 | Detent pin Ø (mm): 22 | D-value (kN): 82,4 |...
€1.128,50 €932,64
Kentekenlamp LED 12/24 V Case IH, New Holland, Steyr
Voltage (V): 12/24 | Test mark: ECE R10 | Bulb: LED | IP6K9K ADR ECE SAE | Bulbs included: Yes More
Voltage (V): 12/24 | Test mark: ECE R10 | Bulb: LED | IP6K9K ADR ECE S...
€50,92 €42,08 €48,35 €39,96
You save 5%
Scharmüller Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
Scharmüller
Description: Can be disconnected with pin | Colour: Black | Rail width (mm): 330 | Overhang (mm): 67 | Plate height (mm): 160 | D-value (kN): 89,3 | G... More
Description: Can be disconnected with pin | Colour: Black | Rail width...
€758,99 €627,26 €639,25 €528,31
You save 16%
CARLISLE External plate 1,5 mm, inner 99 mm, outer 152 mm
CARLISLE
Version: Thickness: 1.5 mm Inner: 99 mm Outer: 152 mm More
Version: Thickness: 1.5 mm Inner: 99 mm Outer: 152 mm
€33,81 €27,94 €32,10 €26,53
You save 5%
Scharmüller Forced steering 250 mm, K50, right, 2 ton, black, 11,23 kg
Scharmüller
Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Colour: Black | Lock: K50 | Assemb... More
Description: Approved for steering forces up to 20 kN (2 t) | Connecti...
€612,85 €506,49
MAHLE Starter motor with reduction 12 V, 4,2 kW, 10 teeth, clockwise
€545,84 €451,11 €511,70 €422,89
You save 6%
Scharmüller Adapter plate height adjustable 330 mm, 140 x 80 mm, M20, 2000 kg
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 330 mm. Hole pattern: 140 x 80 mm. Guide width: 32 mm. Plate height: 175 mm. Thread: M20. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 330 mm. Hole pat...
€536,25 €443,18
GRANIT NOX sensor exhaust input 415 mm Case IH, Steyr, New Holland
GRANIT
Description: Exhaust / input. More
Description: Exhaust / input.
€762,20 €629,92 €724,00 €598,35
You save 5%
Signal transmitter exhaust aftertreatment Optum 250-300 Tier 4B
€724,98 €599,16 €688,70 €569,17
You save 5%
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Ø: 98.59 x 88.27 x 5.16 mm. More
Ø: 98.59 x 88.27 x 5.16 mm.
€4,24 €3,50
GRANIT Ammonia sensor exhaust gas NH3, 8-pin, 1.000 mm
GRANIT
Description: Model year 07/17 ->. More
Description: Model year 07/17 ->.
€824,16 €681,12 €782,95 €647,07
You save 5%
GRANIT Metering unit with 3 fixing points Case IH, New Holland, Landini
€164,35 €135,83 €156,10 €129,01
You save 5%
Arm, dark gray New Holland, Case IH, Steyr
Reference no.: 47945918. More
Reference no.: 47945918.
€111,39 €92,06 €105,80 €87,44
You save 5%
Replacement key
€9,95 €8,22
GRANIT Fender bracket left Case IH, Steyr, New Holland
€685,47 €566,50 €651,15 €538,14
You save 5%
Showing 49 - 72 of 117

Case IH Optum 270 parts

An Optum 270 spends its days hauling heavy trailers and big implements, and the wear shows at the back of the tractor. Pins, jaws and rails take a beating every day. There are more than 120 parts here that fit the Case IH Optum 270, with a strong focus on trailer hitching plus sensors and cab parts.

Optum 270 sensors

For the engine and exhaust there are NOX sensors, temperature sensors and oil pressure switches, as well as a sensor for PTO speed. When you swap a NOX sensor, wait until the exhaust has cooled and the ignition is off. Put a little high temperature anti-seize on the thread of the new one so it comes out cleanly next time. With any sensor or switch on this tractor, the reference number on the old part is the safest way to match it, because plugs and cable lengths can differ.

The PTO speed sensor lives among dirt and oil mist. If the PTO speed reading drops out or jumps about, clean the sensor tip and check the plug for moisture before anything else. Only if that fails is a new sensor the answer.

Hitch, jaw and Piton Fix

At the rear you will find drawbars, automatic hitches, adapter plates, drawbar frames, top drawbars and the Piton Fix. With these you can replace a worn jaw or convert the tractor to a different hitch system.

Before ordering, measure the rail width of your existing frame and the diameter of the locking pin. An adapter plate or hitch only fits when both match, and the hole pattern of the plate has to line up with your tractor too. When fitting, make sure the locking pin slides all the way through and the catch engages. A pin that stops halfway can let go of the trailer at the next bump in the track.

Cab and engine

  • Gas struts for the rear window
  • A fender frame and hinges
  • Telescopic mirror holders
  • Crankshaft seals

The parts come from GRANIT, Scharmüller, Walterscheid, Wabco and FEBI.

Checking the type

The type plate shows if you are working on an Optum 270 or on another model from the Optum range. Combine that with the reference number on the old part and the measurements of your hitch rail, and you will have what you need to pick the right part on this page.

If there are more Case IH tractors on the yard, every model from the brand is on Case IH parts, from the compact Luxxum up to the heavy ranges.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart