Menu
EUR

Case IH Puma 180 tractor parts & technical data

Servicing or repairing a Case IH Puma 180? Choose from more than 300 matching parts, such as trailer couplings, electrics and lighting for this Puma.

320 parts found for Case IH Puma 180
Show:
FEBI Cab filter 380 x 130 x 48 mm
€30,96 €25,59 €16,64 €13,75
You save 46%
GRANIT Cylinder hydraulic steering Case IH, New Holland
€435,54 €359,95 €413,75 €341,94
You save 5%
Seal kit hydraulic steering Case IH, New Holland
€103,21 €85,30 €98,00 €80,99
You save 5%
Ball joint taper 26 - 28 mm, length 100 mm, M22 x 1,5, 1 1/8" x 12
A: 100 mm. C: M20 x 1,5 mm. D: 1 1/8" x 12 mm. E: 26 mm. F: 28 mm. Taper: 26 - 28 mm. More
A: 100 mm. C: M20 x 1,5 mm. D: 1 1/8" x 12 mm. E: 26 mm. F: 28 mm. Tap...
€117,72 €97,29 €111,80 €92,40
You save 5%
Ball joint taper 24 - 26 mm, length 100 mm, M20 x 1,5, M24 x 1,5
A: 100 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 100 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€57,46 €47,49 €54,55 €45,08
You save 5%
Track rod 1632 mm, 23,5 - 26,4 mm, 40 mm
A: 1632 mm. C: 23,5 - 26,4 mm. G: . E: 40 mm. More
A: 1632 mm. C: 23,5 - 26,4 mm. G: . E: 40 mm.
€396,00 €327,27 €376,20 €310,91
You save 5%
GRANIT Brake disc front axle Ø 246 mm, thickness 4,5 mm, 42 teeth
€61,41 €50,75 €58,30 €48,18
You save 5%
GRANIT Ring gear Ø 384/410 mm, 127 teeth Case IH, New Holland
GRANIT
Version: Ø 384/410 mm, 127 teeth. More
Version: Ø 384/410 mm, 127 teeth.
€272,49 €225,20 €258,85 €213,93
You save 5%
GRANIT As transmission 248,4 mm Case IH, Steyr, New Holland
GRANIT
Length: 248,4 mm. More
Length: 248,4 mm.
€368,84 €304,83 €350,35 €289,55
You save 5%
Scharmüller Adapter plate rail width 325 mm, hole pattern 140 x 80 mm, M16
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pattern: 140 x 80 mm. Guide width: 26 mm. Plate height: 133 mm. Thread: M16. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pat...
€531,07 €438,90 €469,65 €388,14
You save 12%
Borg Warner Cooling fan Ø 620 mm, 9 vanes
Borg Warner
Ø: 620 mm. Notes: 9 Flügel. To fit: Case IH, New Holland, Steyr. More
Ø: 620 mm. Notes: 9 Flügel. To fit: Case IH, New Holland, Steyr.
€178,40 €147,44 €156,60 €129,42
You save 12%
GRANIT Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
€14,30 €11,82
GRANIT Pressure pipe Tector 6 / 7 Case IH, Steyr, New Holland
GRANIT
Installation location: Tector 6 / 7. More
Installation location: Tector 6 / 7.
€52,65 €43,51 €50,00 €41,32
You save 5%
GRANIT Idler pulley outer-Ø 74 mm, width 47 mm Case IH, Steyr, New Holland
GRANIT
Outer Ø: 74 mm. Width: 47 mm. More
Outer Ø: 74 mm. Width: 47 mm.
€109,71 €90,67 €104,20 €86,12
You save 5%
Lift arm right 490 - 610 mm, Ø-upper 16 mm, Ø-lower 19 mm
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis inside = 25 mm. Installation location: rechts. More
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis in...
€477,82 €394,89 €453,90 €375,12
You save 5%
GRANIT Mirror 145 x 195 mm Case IH, New Holland
GRANIT
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. More
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€55,61 €45,96 €52,80 €43,64
You save 5%
Base plate fender pin Ø 25 mm Case IH, New Holland
€118,52 €97,95 €112,55 €93,02
You save 5%
Scharmüller Drawbar K80 manual, rail 325 mm, pin Ø 25 mm, 2000 kg, black
Scharmüller
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000 kg. D-value: 83,9 kN. Plate height: 133 mm. Colour: Black. Overhang:... More
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load cap...
€1.364,41 €1.127,61 €1.149,20 €949,75
You save 16%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.133,29 €936,60 €867,75 €717,15
You save 23%
GRANIT Sensor laadluchttemperatuur
GRANIT
Version: For charge air temperature. More
Version: For charge air temperature.
€61,59 €50,90 €58,50 €48,35
You save 5%
GRANIT Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
GRANIT
Version: Rotation angle sensor (position), electronic linkage control, For clutch and brake operation. More
Version: Rotation angle sensor (position), electronic linkage control,...
€152,54 €126,07 €138,00 €114,05
You save 10%
GRANIT Contact switch mechanical brake light and start safety switch
GRANIT
Version: Brake light and start safety switch. More
Version: Brake light and start safety switch.
€33,55 €27,73 €31,85 €26,32
You save 5%
GRANIT Push button switch PTO shaft with connection cable and plug
GRANIT
Version: Front PTO operation, Connection cable with plug. More
Version: Front PTO operation, Connection cable with plug.
€194,61 €160,83 €176,00 €145,45
You save 10%
Showing 145 - 168 of 320

Case IH Puma 180 parts for the hitch, cab and electrics

On a Case IH Puma 180 that spends its days pulling heavy trailers, wear shows up at the back first: play in the drawbar, a worn pin in the piton or an automatic hitch that no longer locks cleanly. This page lists more than 300 new replacement parts that fit this tractor, from the hitch to the driver's seat. Brands include GRANIT, Scharmüller, ROCKINGER, GRAMMER and Sauermann.

Drawbars, Piton Fix and adapter plates

For the rear hitch there are automatic drawbars, top drawbars, Piton Fix units and automatic hitches, along with height-adjustable adapter plates. Before ordering, measure the rail width of the existing mounting and the thickness of the coupling pin, because those two decide which drawbar fits your linkage. Take a close look at the old part as well. It often carries a stamped or labelled reference number, and that number is the quickest route to the right replacement.

A workshop tip: grease the locking pin of a piton or automatic hitch a few times per season and check the retaining spring. A pin that seizes with rust can leave the lock half open, and you often only find out when the drawbar eye comes loose. Parts for trailers with forced steering are on this page as well.

Seats, mirrors and cab parts

Long days on the Puma 180 soon show up a worn seat. You will find air-suspended GRAMMER tractor seats such as the Maximo Professional, and PROBOSS seats with seat heating. There are also mirrors, gas struts for windows and doors, and tank caps. Replace a gas strut as soon as it stops holding a window open, before a gust of wind slams the glass shut.

Alternators, sensors and switches

On the electrical side there are alternators, a sensor for the PTO transmission and an oil pressure switch for the steering. Put the old alternator next to the new one and compare the mounting lugs, pulley and plug before fitting it. Seal kits round things off.

The Puma 180 belongs to the Case IH Puma series. If you also run another model from that line, see the pages for the Case IH Puma 165, Puma 185, Puma 200, Puma 150, Puma 160 or Puma 220. Each has its own page with the parts that fit it. Every other model from the brand is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart