Menu
EUR

Case IH Puma 230 tractor parts & technical data

Among the more than 250 parts for the Case IH Puma 230 you are likely to find what you need, including trailer couplings, electrics and lighting.

260 parts found for Case IH Puma 230
Show:
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
Scharmüller Drawbar bracket 200 x 100 mm, bore M20, inner width 124 mm, black
Scharmüller
suitable for: New Holland. Series: T7 SWB (Tier 5). Category: Drawbar. Version: Brackets. Colour: Black. Hole: M20 mm. Internal width: 124 mm. Hole pa... More
suitable for: New Holland. Series: T7 SWB (Tier 5). Category: Drawbar....
€260,51 €215,30
Scharmüller Adapter plate rail width 325 mm, hole pattern 140 x 80 mm, M16
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pattern: 140 x 80 mm. Guide width: 26 mm. Plate height: 133 mm. Thread: M16. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pat...
€531,07 €438,90 €469,65 €388,14
You save 12%
MAHLE Fan clutch Ø 165 mm Case IH Puma 165-3000SP, New Holland
€374,37 €309,40 €233,95 €193,35
You save 38%
Borg Warner Cooling fan Ø 620 mm, 9 vanes
Borg Warner
Ø: 620 mm. Notes: 9 Flügel. To fit: Case IH, New Holland, Steyr. More
Ø: 620 mm. Notes: 9 Flügel. To fit: Case IH, New Holland, Steyr.
€178,40 €147,44 €156,60 €129,42
You save 12%
GRANIT Tank cap thread 45 mm, for expansion tank
GRANIT
Version: Thread: 45 mm, For expansion tank. More
Version: Thread: 45 mm, For expansion tank.
€16,00 €13,22
Rail pressure sensor Case IH, Steyr, New Holland
€305,28 €252,30 €290,00 €239,67
You save 5%
GRANIT Pressure pipe Tector 6 / 7 Case IH, Steyr, New Holland
GRANIT
Installation location: Tector 6 / 7. More
Installation location: Tector 6 / 7.
€52,65 €43,51 €50,00 €41,32
You save 5%
Lift arm right 490 - 610 mm, Ø-upper 16 mm, Ø-lower 19 mm
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis inside = 25 mm. Installation location: rechts. More
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis in...
€477,82 €394,89 €453,90 €375,12
You save 5%
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 1800 mm. Reference no.: 81637330032. Applicat... More
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location...
€32,43 €26,80 €30,80 €25,45
You save 5%
Gas strut rear window 200 N, 490 mm, ball socket 10 mm
Newtons: 200. A: 490 mm. B: 245 mm. C: 10 mm. D: 10 mm. To fit: rear screen. Form: 6. More
Newtons: 200. A: 490 mm. B: 245 mm. C: 10 mm. D: 10 mm. To fit: rear s...
€49,72 €41,09 €44,95 €37,15
You save 10%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 38 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€849,73 €702,26 €751,50 €621,07
You save 12%
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
You save 21%
ROCKINGER Top drawbar rail 390 mm, pin Ø 25 mm, coupling pin 36 mm
ROCKINGER
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 36 mm. Load capacity: 2000 kg. D-value: 98,1 kN. Colour: Black. Drawbar ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.858,56 €1.536,00 €1.494,25 €1.234,92
You save 20%
GRANIT Telescopic mirror bracket left Case IH, New Holland
GRANIT
Installation location: Left. More
Installation location: Left.
€265,53 €219,45 €240,20 €198,51
You save 10%
Rotation angle sensor transmission clutch operation servo motor
Version: Function: clutch operation, Rotation angle sensor, reversible PTO shaft (servomotor). More
Version: Function: clutch operation, Rotation angle sensor, reversible...
€502,35 €415,17 €454,50 €375,62
You save 10%
GRANIT Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
GRANIT
Version: Rotation angle sensor (position), electronic linkage control, For clutch and brake operation. More
Version: Rotation angle sensor (position), electronic linkage control,...
€152,54 €126,07 €138,00 €114,05
You save 10%
GRANIT Contact switch mechanical brake light and start safety switch
GRANIT
Version: Brake light and start safety switch. More
Version: Brake light and start safety switch.
€33,55 €27,73 €31,85 €26,32
You save 5%
Sensor transmission PTO shaft, connection cable with plug, 3-pin
Version: For PTO shaft, connection cable with plug connection, 3-pin. More
Version: For PTO shaft, connection cable with plug connection, 3-pin.
€94,14 €77,80 €85,15 €70,37
You save 10%
Push button switch rear PTO shaft 48 V, button yellow, Ø 30 mm, stroke 5 mm
Version: 48 V switching voltage, Yellow button, break contact External switch on the rear mudguard, Total button travel: 5 mm, Ø 30 mm, plug connecti... More
Version: 48 V switching voltage, Yellow button, break contact External...
€45,80 €37,85 €43,50 €35,95
You save 5%
Multifunction switch indicator, parking light, dipped beam
Version: With function: indicator light, parking light, dipped beam, full beam, horn. More
Version: With function: indicator light, parking light, dipped beam, f...
€168,81 €139,51 €152,70 €126,20
You save 10%
GRANIT Rocker switch lifting unit operation lifting and lowering, extern circuit fender
GRANIT
Version: (Rear operation) lifting and lowering, External switch (on mudguard). More
Version: (Rear operation) lifting and lowering, External switch (on mu...
€139,76 €115,50 €126,40 €104,46
You save 10%
LED work lights flood beam 40 W, 2392 lm, Ø 84 x 72 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: -. Dimensions W x H x D: Ø 84 x 72 mm. Mounting... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€68,24 €56,40 €64,80 €53,55
You save 5%
Showing 121 - 144 of 260

Case IH Puma 230 parts

Contractors and farms that pull heavy trailers with a Case IH Puma 230 from the Puma CVX line will know where the wear shows: the hitch, the seat and the engine bay. More than 250 parts are listed for this tractor.

The hitch end

For coupling up there are automatic drawbars, top drawbars, automatic hitches, Piton Fix and height adjustable adapter plates from Scharmüller, ROCKINGER and Sauermann among others. Rail width and hole pattern decide whether an adapter plate or drawbar fits, so measure both on your own tractor first.

Engine bay

Under the hood you will find fan clutches, alternators, idler pulleys for the belt drive, oil pressure switches and sensors such as the transmission oil temperature sensor. Gas struts hold the hood open.

Replace an idler pulley together with the belt. Spin the old pulley by hand before removing it. If you hear rumbling or feel play, it was on its way out and would soon have damaged a new belt. When swapping a hood gas strut, prop the heavy hood securely, so it cannot drop unexpectedly.

Cab and seat

Long days call for a decent seat. There are GRAMMER tractor seats such as the air suspended Maximo Dynamic, and a PROBOSS seat with seat heater. Mirrors for the Puma 230 CVX and LED work lights are listed as well.

Sensors and switches

An oil pressure switch that makes the warning light flicker while the actual pressure is fine is a familiar fault. If in doubt, check the pressure with a separate gauge, and if the reading is good, replace the switch. Use a new sealing ring and do not overtighten it, as the housing is delicate. The transmission oil temperature sensor can also give odd readings when its plug is dirty, so clean the contacts first.

An air suspended seat that slowly sinks lower is losing air at the bellows or the seat compressor. Check the air connection and the seat heater plug before fitting a new seat. LED work lights need little care beyond a clean lens and a firm mounting, so tighten the bolts well and leave some slack in the cable.

Read the type plate to confirm you have a Puma 230. An alternator, sensor or fan clutch almost always carries a number you can compare with the details of the item.

The Case IH Puma 170 from the same line has its own page, useful if you run both. For every other model of the make, go to Case IH onderdelen.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart