Menu
EUR

New Holland T4050 tractor parts & technical data

Running a New Holland T4050? You can choose from more than 190 parts that fit, such as trailer couplings, lighting, and steering and front axle components.

195 parts found for New Holland T4050
Show:
As PTO shaft 540 / 750 rpm. Case IH, New Holland, Steyr
10%
As PTO shaft 540 / 750 rpm. Case IH, New Holland, Steyr
€432,35 €357,31 €391,15 €323,26
 
Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, 190 ccm oil
5%
Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, 190 ccm oil
No. of grooves: 4 | Oil quantity (ccm): 190 | Suitable oil: PAG 46 | Nominal vol...
€475,11 €392,65 €451,35 €373,02
 
GRANIT Thrust bearing driving clutch single 50 x 80/89 x 22 mm
5%
GRANIT
Thrust bearing driving clutch single 50 x 80/89 x 22 mm
Dimensions (mm): 50 x 80/89 x 22
€48,82 €40,35 €46,35 €38,31
 
FEBI Transmission-oil filter W14005
70%
FEBI
Transmission-oil filter W14005
€144,29 €119,25 €43,19 €35,69
 
GRANIT Counterweight Case IH JX 90-95, JXU 75-115, MXU 100-130
5%
GRANIT
Counterweight Case IH JX 90-95, JXU 75-115, MXU 100-130
€1.237,15 €1.022,44 €1.175,25 €971,28
 
GRANIT Piston, complete 3 rings, piston pin Ø 38 x 82 mm, without cylinder liner
5%
GRANIT
Piston, complete 3 rings, piston pin Ø 38 x 82 mm, without cylinder liner
Dimensions: 3 rings, Gudgeon pin Ø 38 x 82 mm, Combustion chamber Ø 52.3 mm, Com...
€126,41 €104,47 €120,00 €99,17
 
GRANIT Thermostat gasket Case IH, Steyr, New Holland
5%
GRANIT
Thermostat gasket Case IH, Steyr, New Holland
€32,03 €26,47 €30,40 €25,12
 
Optibelt Powerband V-belt 8 grooves without air conditioning and air pressure system
5%
Optibelt
Powerband V-belt 8 grooves without air conditioning and air pressure system
€74,81 €61,83 €71,00 €58,68
 
GRANIT Intake gasket Case IH, Steyr, New Holland
GRANIT
Intake gasket Case IH, Steyr, New Holland
€2,19 €1,81
 
Cylinder head gasket 1,15 mm Case IH, Steyr, New Holland
5%
Cylinder head gasket 1,15 mm Case IH, Steyr, New Holland
€123,54 €102,10 €117,35 €96,98
 
GRANIT Idler pulley engine cooling Ø 65 mm Case IH, Steyr, New Holland
5%
GRANIT
Idler pulley engine cooling Ø 65 mm Case IH, Steyr, New Holland
Ø: 65 mm.
€208,57 €172,37 €198,10 €163,72
 
Gas strut rear window 150 N, 585 mm, C 10 mm, D 10 mm
5%
Gas strut rear window 150 N, 585 mm, C 10 mm, D 10 mm
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear screen. For...
€81,69 €67,51 €77,60 €64,13
 
GRANIT Spring left fender Case IH, Steyr, New Holland
10%
GRANIT
Spring left fender Case IH, Steyr, New Holland
€36,91 €30,50 €33,35 €27,56
 
Cobo Rear light left / right 160 x 67 x 60 mm, hole spacing 57 mm, 12 V
5%
Cobo
Rear light left / right 160 x 67 x 60 mm, hole spacing 57 mm, 12 V
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: 4-pin. Width: 160 mm. Form...
€34,61 €28,60 €32,85 €27,15
 
GRANIT Flasher unit 12 V, 16 blade connections, with holder
5%
GRANIT
Flasher unit 12 V, 16 blade connections, with holder
Version: 12 V, with bracket, Control unit for indicator and hazard warning light...
€242,98 €200,81 €230,80 €190,74
 
GRANIT Mirror 236 x 180 mm unheated, rod-Ø 16 - 20 mm - 25 pieces
5%
GRANIT
Mirror 236 x 180 mm unheated, rod-Ø 16 - 20 mm - 25 pieces
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Additional inf...
€482,81 €399,02 €458,65 €379,05
 
Pin for differential gear Fiat, New Holland
5%
Pin for differential gear Fiat, New Holland
€39,94 €33,01 €37,90 €31,32
 
Thermostat Ø 60,5 mm, 81 °C Case IH, Steyr, New Holland
5%
Thermostat Ø 60,5 mm, 81 °C Case IH, Steyr, New Holland
Ø: 60,5 mm. Temperature: 81 °C.
€45,96 €37,98 €43,65 €36,07
 
Oil cooler Case IH Farmall JX 75-110, New Holland T4020-T4050
5%
Oil cooler Case IH Farmall JX 75-110, New Holland T4020-T4050
€216,53 €178,95 €205,70 €170,00
 
GRANIT Connecting rod bolt M10 x 1,25 x 52 mm Case IH, New Holland
GRANIT
Connecting rod bolt M10 x 1,25 x 52 mm Case IH, New Holland
Dimensions: M10 x 1.25 x 52.
€7,70 €6,36
 
GRANIT Cover Case IH, New Holland
5%
GRANIT
Cover Case IH, New Holland
€50,24 €41,52 €47,70 €39,42
 
Showing 169 - 192 of 195

New Holland T4050 parts for lights, lift shaft and hitch

A T4050 spends plenty of time on the road, which means its indicators, rear lights and mirrors need to be in good order. This page lists more than 190 new parts for the New Holland T4050, from GRANIT, ROCKINGER, Cobo, Walterscheid and LUK.

Hitch and coupling

At the rear there are automatic drawbars, flange hitches, Piton Fix rails and adapter plates, so you can set up the hitch for the trailers and implements you actually use.

Road lighting and electrics

  • Indicator and position lights
  • Rear lights
  • Mirrors
  • Changeover relays and micro relays
  • Push button switches

If one side flashes too fast or not at all, a failed bulb or a poor earth is the usual cause. When the whole indicator circuit is dead, the relay is the next thing to check. Corroded contacts in a lamp holder can be cleaned back to bare metal and given a smear of contact grease, so they keep working through a wet winter.

Lift shaft seals

For the hydraulics there are seals for the lifting shaft and complete seal kits, plus thrust bearings for the drive clutch.

If the lift shaft is leaking oil, look at the running surface on the shaft when you change the seal. Where the old seal has worn a groove, a new one will leak at the same spot. Fit the seal with its lip facing the oil and drive it in square using a suitable drift.

A thrust bearing that sings or rattles as soon as you press the clutch pedal usually gives plenty of warning. Do not wait for it to break up, because the rest of the clutch suffers when it does. On the Piton Fix rail, check the locking pin and guide now and then. Once the pin has play, the hitch knocks back and forth when pulling away and braking.

Belt and cab

A powerband, or multi-rib belt, drives the ancillaries. Replace it as soon as small cracks appear across the ribs. For the cab there is a gas strut for the windscreen frame.

Identifying the correct part

The T4050 is part of the New Holland T4000 series. Note the serial number on the data plate before ordering. Lamps and relays usually have the reference number on the housing. For seals, measure the old ring so the inner diameter matches the shaft exactly.

Other T4000 models

The smaller models in this series each have their own page:

Every other model from the brand is on the New Holland parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart