Menu
EUR

New Holland T5030 tractor parts & technical data

Working on a New Holland T5030? This page lists more than 200 parts, among them trailer couplings, lighting and electrics that fit the T5000 series.

228 parts found for New Holland T5030
Show:
HELLA Alternator 14 V / 120 A, pulley Ø 55 mm, 8 grooves
HELLA
Additional information: With V-ribbed belt pulley | Pulley Ø (mm): 55 | Nominal values (V / A): 14 / 120 | No. of grooves: 8 | Charging current (A): ... More
Additional information: With V-ribbed belt pulley | Pulley Ø (mm): 55...
€604,38 €499,49 €485,90 €401,57
You save 20%
FEBI Powerband multi-rib belt 8 ribs Case IH, Steyr, New Holland
FEBI
To fit as: New Holland More
To fit as: New Holland
€32,86 €27,16 €12,02 €9,93
You save 63%
FEBI Engine oil filter LF16117
€32,61 €26,95 €20,58 €17,01
You save 37%
Ball joint 888 mm, M16 x 1,5, 23,8 mm, taper 18,2 - 20,5 mm
A: 888 mm. C: M16 x 1,5 mm. D: 23,8 mm. E: 18,2 mm. F: 20,5 mm. Taper: 18,2 - 20,5 mm. More
A: 888 mm. C: M16 x 1,5 mm. D: 23,8 mm. E: 18,2 mm. F: 20,5 mm. Taper:...
€151,63 €125,31 €144,00 €119,01
You save 5%
Master brake cylinder mineral oil piston Ø 38,3 mm Case IH, New Holland
€171,34 €141,60 €162,75 €134,50
You save 5%
GRANIT Gear wheel PTO shaft 540 rpm. New Holland
GRANIT
Version: PTO shaft, 540 rpm. More
Version: PTO shaft, 540 rpm.
€162,62 €134,40 €154,45 €127,64
You save 5%
GRANIT Gear wheel PTO shaft 14 / 57 teeth Fiat, New Holland
GRANIT
Number of teeth: 14/57. More
Number of teeth: 14/57.
€115,68 €95,60 €109,85 €90,79
You save 5%
GRANIT Planetary gear transmission 19 / 14 teeth New Holland
GRANIT
Number of teeth: 19/14. More
Number of teeth: 19/14.
€79,84 €65,98 €75,80 €62,64
You save 5%
Planetary gear transmission 19 / 14 teeth New Holland
Number of teeth: 19/14. More
Number of teeth: 19/14.
€56,60 €46,78 €53,75 €44,42
You save 5%
GRANIT Intermediate gear reversing clutch 28/38 teeth New Holland, Fiat
GRANIT
Number of teeth: 28/38. More
Number of teeth: 28/38.
€299,26 €247,32 €284,25 €234,92
You save 5%
GRANIT Piston, complete 3 rings, piston pin Ø 38 x 82 mm, without cylinder liner
GRANIT
Dimensions: 3 rings, Gudgeon pin Ø 38 x 82 mm, Combustion chamber Ø 52.3 mm, Combustion chamber depth 24 mm, Rings 2.8 (trapezoidal ring) / 2.4 mm /... More
Dimensions: 3 rings, Gudgeon pin Ø 38 x 82 mm, Combustion chamber Ø ...
€126,41 €104,47 €120,00 €99,17
You save 5%
GRANIT Water pump with gasket Case IH, Steyr, New Holland
GRANIT
Reference no.: S.68286. More
Reference no.: S.68286.
€93,30 €77,11 €88,60 €73,22
You save 5%
GRANIT Sealing ring piston 110 x 114 x 4 mm Fiat, Ford, New Holland
GRANIT
Dimensions: 110 x 114 x 4 mm. More
Dimensions: 110 x 114 x 4 mm.
€17,45 €14,42
Seal kit Hürlimann, Deutz-Fahr, Steyr
Reference no.: 47436943. More
Reference no.: 47436943.
€78,26 €64,68 €74,30 €61,41
You save 5%
GRANIT Lamp glass right, left
GRANIT
Installation location: Right, left. More
Installation location: Right, left.
€27,85 €23,02
GRANIT Double clutch DuT 310 sintered, 40 x 45 mm, 16 splines
GRANIT
Material specifications: Sintered clutch lining | Additional information: Made in Germany | Dimensions (mm): 40 x 45 16 grooves More
Material specifications: Sintered clutch lining | Additional informati...
€768,97 €635,51 €695,70 €574,96
You save 10%
Showing 169 - 192 of 228

Finding and fitting New Holland T5030 parts

Does the rating plate on your tractor say T5030? Then this is the page with replacement parts made to fit exactly that model, more than 200 of them, from GRANIT, ROCKINGER, LUK, Sauermann and Eaton.

The T5030 is part of the T5000 series from New Holland, and every model in that series has its own page, so there is no guesswork involved. When you take a part off the tractor, look for a number stamped into it or on a riveted tag and compare it with the parts on this page. For lamps and springs, check which side they come from as well, because left and right versions are often mirror images.

Clutch and lift linkage

For the driving clutch there are clutch plates, single pressure plates from LUK and Eaton, and thrust bearings. If the tractor is split, replacing all three at once makes sense. The real work is in separating the halves, not in the parts, and an old thrust bearing behind a new plate is a good way to end up splitting it twice.

If the linkage leaks, you need the lift cylinder seals, piston sealing rings and O-rings. A tip for the job: clean the cylinder bore thoroughly and run your fingertips over it to feel for scoring. A new seal will not last on a damaged bore. Coat the new rings with clean hydraulic oil and push the piston in square so that the lip does not fold over.

In the transmission there are gear wheels, such as one for the reduction.

Hitch, cab and electrics

At the back you will find automatic drawbars from ROCKINGER and Piton Fix pins. The cab is covered by air suspended tractor seats and gas struts, for example for the roof hatch. A roof hatch that will not stay open is nearly always down to a worn strut. On the electrical side there are rear lights, contact switches and sensors, plus individual springs for the controls. A rear light with a cracked lens lets moisture in and the bulb holder slowly corrodes, so replacing it early saves repairing the wiring later.

Other models in the T5000 series

If you also work on a sister model of the T5030, go to the page for that tractor. It lists the parts that fit that model specifically:

Every other model from the brand is reached through New Holland parts, where each New Holland tractor has an entry of its own.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart