Menu
EUR

New Holland T5030 tractor parts & technical data

Working on a New Holland T5030? This page lists more than 200 parts, among them trailer couplings, lighting and electrics that fit the T5000 series.

228 parts found for New Holland T5030
Show:
HELLA Alternator 14 V / 120 A, pulley Ø 55 mm, 8 grooves
20%
HELLA
Alternator 14 V / 120 A, pulley Ø 55 mm, 8 grooves
Additional information: With V-ribbed belt pulley | Pulley Ø (mm): 55 | Nominal ...
€604,38 €499,49 €485,90 €401,57
 
FEBI Powerband multi-rib belt 8 ribs Case IH, Steyr, New Holland
63%
FEBI
Powerband multi-rib belt 8 ribs Case IH, Steyr, New Holland
To fit as: New Holland
€32,86 €27,16 €12,02 €9,93
 
FEBI Engine oil filter LF16117
37%
FEBI
Engine oil filter LF16117
€32,61 €26,95 €20,58 €17,01
 
Ball joint 888 mm, M16 x 1,5, 23,8 mm, taper 18,2 - 20,5 mm
5%
Ball joint 888 mm, M16 x 1,5, 23,8 mm, taper 18,2 - 20,5 mm
A: 888 mm. C: M16 x 1,5 mm. D: 23,8 mm. E: 18,2 mm. F: 20,5 mm. Taper: 18,2 - 20...
€151,63 €125,31 €144,00 €119,01
 
Master brake cylinder mineral oil piston Ø 38,3 mm Case IH, New Holland
5%
Master brake cylinder mineral oil piston Ø 38,3 mm Case IH, New Holland
Piston Ø: 38,3 mm.
€171,34 €141,60 €162,75 €134,50
 
GRANIT Gear wheel PTO shaft 540 rpm. New Holland
5%
GRANIT
Gear wheel PTO shaft 540 rpm. New Holland
Version: PTO shaft, 540 rpm.
€162,62 €134,40 €154,45 €127,64
 
GRANIT Gear wheel PTO shaft 14 / 57 teeth Fiat, New Holland
5%
GRANIT
Gear wheel PTO shaft 14 / 57 teeth Fiat, New Holland
Number of teeth: 14/57.
€115,68 €95,60 €109,85 €90,79
 
GRANIT Planetary gear transmission 19 / 14 teeth New Holland
5%
GRANIT
Planetary gear transmission 19 / 14 teeth New Holland
Number of teeth: 19/14.
€79,84 €65,98 €75,80 €62,64
 
Planetary gear transmission 19 / 14 teeth New Holland
5%
Planetary gear transmission 19 / 14 teeth New Holland
Number of teeth: 19/14.
€56,60 €46,78 €53,75 €44,42
 
GRANIT Intermediate gear reversing clutch 28/38 teeth New Holland, Fiat
5%
GRANIT
Intermediate gear reversing clutch 28/38 teeth New Holland, Fiat
Number of teeth: 28/38.
€299,26 €247,32 €284,25 €234,92
 
GRANIT Piston, complete 3 rings, piston pin Ø 38 x 82 mm, without cylinder liner
5%
GRANIT
Piston, complete 3 rings, piston pin Ø 38 x 82 mm, without cylinder liner
Dimensions: 3 rings, Gudgeon pin Ø 38 x 82 mm, Combustion chamber Ø 52.3 mm, Com...
€126,41 €104,47 €120,00 €99,17
 
GRANIT Water pump with gasket Case IH, Steyr, New Holland
5%
GRANIT
Water pump with gasket Case IH, Steyr, New Holland
Reference no.: S.68286.
€93,30 €77,11 €88,60 €73,22
 
Handle for- and rear window lock
Handle for- and rear window lock
€34,00 €28,10
 
GRANIT Sealing ring piston 110 x 114 x 4 mm Fiat, Ford, New Holland
GRANIT
Sealing ring piston 110 x 114 x 4 mm Fiat, Ford, New Holland
Dimensions: 110 x 114 x 4 mm.
€17,45 €14,42
 
Seal kit Hürlimann, Deutz-Fahr, Steyr
5%
Seal kit Hürlimann, Deutz-Fahr, Steyr
Reference no.: 47436943.
€78,26 €64,68 €74,30 €61,41
 
GRANIT Lamp glass right, left
GRANIT
Lamp glass right, left
Installation location: Right, left.
€27,85 €23,02
 
GRANIT Double clutch DuT 310 sintered, 40 x 45 mm, 16 splines
10%
GRANIT
Double clutch DuT 310 sintered, 40 x 45 mm, 16 splines
Material specifications: Sintered clutch lining | Additional information: Made i...
€768,97 €635,51 €695,70 €574,96
 
Showing 169 - 192 of 228

Finding and fitting New Holland T5030 parts

Does the rating plate on your tractor say T5030? Then this is the page with replacement parts made to fit exactly that model, more than 200 of them, from GRANIT, ROCKINGER, LUK, Sauermann and Eaton.

The T5030 is part of the T5000 series from New Holland, and every model in that series has its own page, so there is no guesswork involved. When you take a part off the tractor, look for a number stamped into it or on a riveted tag and compare it with the parts on this page. For lamps and springs, check which side they come from as well, because left and right versions are often mirror images.

Clutch and lift linkage

For the driving clutch there are clutch plates, single pressure plates from LUK and Eaton, and thrust bearings. If the tractor is split, replacing all three at once makes sense. The real work is in separating the halves, not in the parts, and an old thrust bearing behind a new plate is a good way to end up splitting it twice.

If the linkage leaks, you need the lift cylinder seals, piston sealing rings and O-rings. A tip for the job: clean the cylinder bore thoroughly and run your fingertips over it to feel for scoring. A new seal will not last on a damaged bore. Coat the new rings with clean hydraulic oil and push the piston in square so that the lip does not fold over.

In the transmission there are gear wheels, such as one for the reduction.

Hitch, cab and electrics

At the back you will find automatic drawbars from ROCKINGER and Piton Fix pins. The cab is covered by air suspended tractor seats and gas struts, for example for the roof hatch. A roof hatch that will not stay open is nearly always down to a worn strut. On the electrical side there are rear lights, contact switches and sensors, plus individual springs for the controls. A rear light with a cracked lens lets moisture in and the bulb holder slowly corrodes, so replacing it early saves repairing the wiring later.

Other models in the T5000 series

If you also work on a sister model of the T5030, go to the page for that tractor. It lists the parts that fit that model specifically:

Every other model from the brand is reached through New Holland parts, where each New Holland tractor has an entry of its own.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart