Menu
EUR

New Holland T5040 tractor parts & technical data

Which parts fit the New Holland T5040? We have selected more than 200 for the T5000 series, with trailer couplings, electrics and lighting among the groups.

234 parts found for New Holland T5040
Show:
GRANIT Relays make contact 12 V, 30 A, without bracket, 5-pin, 6,3 mm
GRANIT
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm.
€29,20 €24,13
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
You save 23%
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 62 | Length (mm): 203 | Weight (g): 400 | Connection thread E: 3/8"" | Dimensions... More
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 6...
€56,19 €46,44 €53,35 €44,09
You save 5%
GRANIT Door contact switch 12 V / 24 V, continuous load 2 A
GRANIT
Version: 12 V / 24 V continuous load 2 A More
Version: 12 V / 24 V continuous load 2 A
€35,70 €29,50
GRANIT Pilot bearing 17 x 47 x 14 mm
GRANIT
Dimensions (mm): 17 x 47 x 14 More
Dimensions (mm): 17 x 47 x 14
€6,30 €5,21
FEBI Secondary air filter AF26655, CF2120
FEBI
suitable main element More
suitable main element
€43,78 €36,18 €35,00 €28,93
You save 20%
Ball joint, complete 353 mm, M20 x 1,5, M22 x 1,5, taper 23,4 - 26,2 mm
A: 353 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,4 mm. F: 26,2 mm. Taper: 23,4 - 26,2 mm. More
A: 353 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,4 mm. F: 26,2 mm. T...
€134,23 €110,93 €127,50 €105,37
You save 5%
LUK Pilot bearing 17 x 47 x 14 mm
LUK
Dimensions: 17 x 47 x 14 mm. Menke no.: 167836. More
Dimensions: 17 x 47 x 14 mm. Menke no.: 167836.
€32,31 €26,70 €30,65 €25,33
You save 5%
GRANIT V-belt 1381 mm, 8 ribs Case IH, Steyr, New Holland
GRANIT
Belt length: 1381 mm. Ribs: 8 n. Length: 1381 mm. More
Belt length: 1381 mm. Ribs: 8 n. Length: 1381 mm.
€41,41 €34,22 €39,30 €32,48
You save 5%
Radiator cap Ø 56 mm, height 19 mm
Neck Ø: 56 mm. Height: 19 mm. More
Neck Ø: 56 mm. Height: 19 mm.
€40,17 €33,20 €38,15 €31,53
You save 5%
Optibelt Powerband multi-rib belt 8 ribs New Holland, Case IH, Steyr
€88,04 €72,76 €83,60 €69,09
You save 5%
GRANIT Heating flange Case IH, Steyr, New Holland
€127,79 €105,61 €121,40 €100,33
You save 5%
GRANIT Spacer 25 x 42 x 24 mm Case IH, Fiat, New Holland
GRANIT
Dimensions: 25 x 42 x 24 mm. More
Dimensions: 25 x 42 x 24 mm.
€26,00 €21,49
GRANIT Sealing ring piston 98 x 3,6 mm Ford, Case IH, Fiat, Steyr, New Holland
GRANIT
Dimensions: 98 x 3.6 mm. More
Dimensions: 98 x 3.6 mm.
€2,86 €2,36
GRANIT Spring fender right Case IH, Steyr, New Holland
€63,98 €52,88 €60,75 €50,21
You save 5%
AL-KO Chock UK 800 folding, 2.500 kg, tires radius 830 mm
AL-KO
Static tyre radius up to max.: 830 mm. More
Static tyre radius up to max.: 830 mm.
€109,20 €90,25
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.133,29 €936,60 €867,75 €717,15
You save 23%
Sauermann Drawbar inner part 320 mm, coupling pin 31 mm, 2000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 80,4 kN. Colour: Black. More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecti...
€686,31 €567,20 €651,95 €538,80
You save 5%
Scharmüller Drawbar automatic rail width 320 mm, coupling pin 38 mm
Scharmüller
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 89,3 kN. Colour: Black. Descript... More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecti...
€1.203,95 €995,00 €1.064,75 €879,96
You save 12%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.621,20 €1.339,83
Wiper motor windshield 12 V, angle 90° Case IH, New Holland
Volts: 12. Angle: 90 °. More
Volts: 12. Angle: 90 °.
€399,32 €330,02 €361,25 €298,55
You save 10%
Push button switch PTO shaft, connection cable with plug
Version: PTO (PTO shaft switch), With mechanical control units, Connection cable with plug. More
Version: PTO (PTO shaft switch), With mechanical control units, Connec...
€132,85 €109,79 €120,15 €99,30
You save 10%
GRANIT Rear light right 199 x 85 x 145 mm, 12 V
GRANIT
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Width: 199 mm. Form: Rectangular, short sides rounded. Height: 85 mm. Dimensions W x H x D: 199 x 85 x 1... More
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Width: 199 mm. Form: Rec...
€56,06 €46,33 €50,70 €41,90
You save 10%
Showing 73 - 96 of 234

New Holland T5040 parts for clutch, linkage and drawbar

New Holland T5040 parts on this page number more than 200, supplied by GRANIT and by makers such as ROCKINGER, LUK, Sauermann and Eaton. They cover the clutch, the hydraulic lift, the hitch and the cab.

Many of these jobs are linked. If the tractor is being split for the clutch anyway, that is the moment to look at the gearbox seals and the PTO sensor as well. It stops you from starting all over again a few months later because of one small part.

Clutch work

Thrust bearings, single clutch pressure plates and clutch plates are all here, for example a thrust bearing for a single driving clutch. When you split the tractor for a clutch job, replace the pressure plate, the plate and the thrust bearing in one go. Reusing an old bearing that starts squealing a few months later means doing the whole job twice. While the engine and gearbox are apart, check the flywheel face for grooves and blue heat marks.

Lift cylinder, gears and sensors

Seals and sealing rings keep the linkage tight, including a seal for the outer lift cylinder and a sealing ring for the piston. There are also O-rings, springs and gear wheels, among them a gear for the reduction drive. A PTO sensor with a connection cable and plug, and contact switches, complete the electrical side.

Drawbar, seat and lights

For the rear there are drawbars, including an automatic one, and Piton Fix rails with a locking pin. In the cab you can fit an air suspended tractor seat in fabric and new gas struts, for example for the roof window. Rear lights are available as well. If an air suspended seat slowly sinks, the leak is usually at the air bag or its fitting. Brush on some soapy water with the compressor running and the bubbles will show you where.

Finding the correct part

Check the type plate to be certain the tractor is a T5040. A reference number on the old part makes the comparison much safer, especially with bearings and seals that look nearly identical from the outside. The T5040 sits in the New Holland T5000 series. If you also run another type from that series, use its own page: New Holland T5030, New Holland T5050, New Holland T5060 or New Holland T5070. All other models of the make are under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart