Menu
EUR

New Holland T5040 tractor parts & technical data

Which parts fit the New Holland T5040? We have selected more than 200 for the T5000 series, with trailer couplings, electrics and lighting among the groups.

234 parts found for New Holland T5040
Show:
GRANIT Relays make contact 12 V, 30 A, without bracket, 5-pin, 6,3 mm
GRANIT
Relays make contact 12 V, 30 A, without bracket, 5-pin, 6,3 mm
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm.
€29,20 €24,13
 
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
23%
ROCKINGER
Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
 
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
5%
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 62 | Length ...
€56,19 €46,44 €53,35 €44,09
 
GRANIT Door contact switch 12 V / 24 V, continuous load 2 A
GRANIT
Door contact switch 12 V / 24 V, continuous load 2 A
Version: 12 V / 24 V continuous load 2 A
€35,70 €29,50
 
GRANIT Pilot bearing 17 x 47 x 14 mm
GRANIT
Pilot bearing 17 x 47 x 14 mm
Dimensions (mm): 17 x 47 x 14
€6,30 €5,21
 
FEBI Secondary air filter AF26655, CF2120
20%
FEBI
Secondary air filter AF26655, CF2120
suitable main element
€43,78 €36,18 €35,00 €28,93
 
Ball joint, complete 353 mm, M20 x 1,5, M22 x 1,5, taper 23,4 - 26,2 mm
5%
Ball joint, complete 353 mm, M20 x 1,5, M22 x 1,5, taper 23,4 - 26,2 mm
A: 353 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,4 mm. F: 26,2 mm. Taper: 23,4...
€134,23 €110,93 €127,50 €105,37
 
LUK Pilot bearing 17 x 47 x 14 mm
5%
LUK
Pilot bearing 17 x 47 x 14 mm
Dimensions: 17 x 47 x 14 mm. Menke no.: 167836.
€32,31 €26,70 €30,65 €25,33
 
GRANIT V-belt 1381 mm, 8 ribs Case IH, Steyr, New Holland
5%
GRANIT
V-belt 1381 mm, 8 ribs Case IH, Steyr, New Holland
Belt length: 1381 mm. Ribs: 8 n. Length: 1381 mm.
€41,41 €34,22 €39,30 €32,48
 
Radiator cap Ø 56 mm, height 19 mm
5%
Radiator cap Ø 56 mm, height 19 mm
Neck Ø: 56 mm. Height: 19 mm.
€40,17 €33,20 €38,15 €31,53
 
Optibelt Powerband multi-rib belt 8 ribs New Holland, Case IH, Steyr
5%
Optibelt
Powerband multi-rib belt 8 ribs New Holland, Case IH, Steyr
€88,04 €72,76 €83,60 €69,09
 
GRANIT Heating flange Case IH, Steyr, New Holland
5%
GRANIT
Heating flange Case IH, Steyr, New Holland
€127,79 €105,61 €121,40 €100,33
 
GRANIT Spacer 25 x 42 x 24 mm Case IH, Fiat, New Holland
GRANIT
Spacer 25 x 42 x 24 mm Case IH, Fiat, New Holland
Dimensions: 25 x 42 x 24 mm.
€26,00 €21,49
 
GRANIT Sealing ring piston 98 x 3,6 mm Ford, Case IH, Fiat, Steyr, New Holland
GRANIT
Sealing ring piston 98 x 3,6 mm Ford, Case IH, Fiat, Steyr, New Holland
Dimensions: 98 x 3.6 mm.
€2,86 €2,36
 
GRANIT Spring fender right Case IH, Steyr, New Holland
5%
GRANIT
Spring fender right Case IH, Steyr, New Holland
€63,98 €52,88 €60,75 €50,21
 
AL-KO Chock UK 800 folding, 2.500 kg, tires radius 830 mm
AL-KO
Chock UK 800 folding, 2.500 kg, tires radius 830 mm
Static tyre radius up to max.: 830 mm.
€109,20 €90,25
 
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
23%
ROCKINGER
Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
Colour: Black. Description: Entire coupling body and bearing forged, Easy height...
€1.133,29 €936,60 €867,75 €717,15
 
Sauermann Drawbar inner part 320 mm, coupling pin 31 mm, 2000 kg
5%
Sauermann
Drawbar inner part 320 mm, coupling pin 31 mm, 2000 kg
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 31 ...
€686,31 €567,20 €651,95 €538,80
 
Scharmüller Drawbar automatic rail width 320 mm, coupling pin 38 mm
12%
Scharmüller
Drawbar automatic rail width 320 mm, coupling pin 38 mm
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 38 ...
€1.203,95 €995,00 €1.064,75 €879,96
 
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.621,20 €1.339,83
 
Wiper motor windshield 12 V, angle 90° Case IH, New Holland
10%
Wiper motor windshield 12 V, angle 90° Case IH, New Holland
Volts: 12. Angle: 90 °.
€399,32 €330,02 €361,25 €298,55
 
Push button switch PTO shaft, connection cable with plug
10%
Push button switch PTO shaft, connection cable with plug
Version: PTO (PTO shaft switch), With mechanical control units, Connection cable...
€132,85 €109,79 €120,15 €99,30
 
GRANIT Rear light right 199 x 85 x 145 mm, 12 V
10%
GRANIT
Rear light right 199 x 85 x 145 mm, 12 V
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Width: 199 mm. Form: Rectangular, ...
€56,06 €46,33 €50,70 €41,90
 
Showing 73 - 96 of 234

New Holland T5040 parts for clutch, linkage and drawbar

New Holland T5040 parts on this page number more than 200, supplied by GRANIT and by makers such as ROCKINGER, LUK, Sauermann and Eaton. They cover the clutch, the hydraulic lift, the hitch and the cab.

Many of these jobs are linked. If the tractor is being split for the clutch anyway, that is the moment to look at the gearbox seals and the PTO sensor as well. It stops you from starting all over again a few months later because of one small part.

Clutch work

Thrust bearings, single clutch pressure plates and clutch plates are all here, for example a thrust bearing for a single driving clutch. When you split the tractor for a clutch job, replace the pressure plate, the plate and the thrust bearing in one go. Reusing an old bearing that starts squealing a few months later means doing the whole job twice. While the engine and gearbox are apart, check the flywheel face for grooves and blue heat marks.

Lift cylinder, gears and sensors

Seals and sealing rings keep the linkage tight, including a seal for the outer lift cylinder and a sealing ring for the piston. There are also O-rings, springs and gear wheels, among them a gear for the reduction drive. A PTO sensor with a connection cable and plug, and contact switches, complete the electrical side.

Drawbar, seat and lights

For the rear there are drawbars, including an automatic one, and Piton Fix rails with a locking pin. In the cab you can fit an air suspended tractor seat in fabric and new gas struts, for example for the roof window. Rear lights are available as well. If an air suspended seat slowly sinks, the leak is usually at the air bag or its fitting. Brush on some soapy water with the compressor running and the bubbles will show you where.

Finding the correct part

Check the type plate to be certain the tractor is a T5040. A reference number on the old part makes the comparison much safer, especially with bearings and seals that look nearly identical from the outside. The T5040 sits in the New Holland T5000 series. If you also run another type from that series, use its own page: New Holland T5030, New Holland T5050, New Holland T5060 or New Holland T5070. All other models of the make are under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart