Menu
EUR

New Holland T5040 tractor parts & technical data

Which parts fit the New Holland T5040? We have selected more than 200 for the T5000 series, with trailer couplings, electrics and lighting among the groups.

234 parts found for New Holland T5040
Show:
Gas strut rear window 350 N, 460 mm
Newtons: 350. A: 460 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear screen. Form: 2. More
Newtons: 350. A: 460 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear scr...
€29,20 €24,13
Base plate fender pin Ø 25 mm Case IH, New Holland
€118,52 €97,95 €112,55 €93,02
You save 5%
Gas strut roof window 150 N, 233,5 mm, stroke 80 mm
suitable for: Dachluke. Newtons: 150. A: 233,5 mm. d1: 8 mm. d2: 18 mm. Stroke: 80 mm. To fit: Roof hatch. More
suitable for: Dachluke. Newtons: 150. A: 233,5 mm. d1: 8 mm. d2: 18 mm...
€62,48 €51,64 €59,35 €49,05
You save 5%
GRANIT Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
GRANIT
Version: Rotation angle sensor (position), electronic linkage control, For clutch and brake operation. More
Version: Rotation angle sensor (position), electronic linkage control,...
€152,54 €126,07 €138,00 €114,05
You save 10%
GRANIT Contact switch green gruppe lever position sensor, with connector
GRANIT
Version: Green, connection cable with plug. More
Version: Green, connection cable with plug.
€137,02 €113,24 €130,15 €107,56
You save 5%
Contact switch
€38,76 €32,03 €35,00 €28,93
You save 10%
Rocker switch EHR built-in rear on the fender
Version: Mounting: on the rear mudguard. More
Version: Mounting: on the rear mudguard.
€36,97 €30,55 €35,10 €29,01
You save 5%
Rear light, brake light, indicator 200 x 70 x 62 mm, 12/24 V
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Width: 200 mm. Form: Rectangular. Height: 70 mm. Hole spacing: 90 mm. Dimensions W x H x D: 200 x 70 x 62 mm... More
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Width: 200 mm. Form: Rectang...
€72,60 €60,00 €68,95 €56,98
You save 5%
GRANIT Indicator/position light 199 x 85 x 145 mm right yellow, white P21W, R5W
GRANIT
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 199 mm. Form: Rectangular. Height: 85 mm. Dimensions W x H x D: 199 x 85 x 145 mm. D... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 199 ...
€72,92 €60,26 €65,95 €54,50
You save 10%
GRANIT Preheating relay 12 volt with plug connection
GRANIT
Version: 12 V, with plug connection. More
Version: 12 V, with plug connection.
€171,65 €141,86 €155,30 €128,35
You save 10%
LUK Clutch kit Case IH, Fiat, Ford, New Holland
LUK
Contents: Pressure plate 458231010511, clutch plate 458331022010 | To fit: Case IH, New Holland More
Contents: Pressure plate 458231010511, clutch plate 458331022010 | To ...
€1.203,95 €995,00 €1.143,75 €945,25
You save 5%
LUK Double clutch 310/310TGU6 40 x 45 mm, 16 splines sintered chain pitch 33 mm
LUK
Dimensions (mm): 40 x 45 16 grooves | web (mm): 33 | Material specifications: Sintered clutch lining More
Dimensions (mm): 40 x 45 16 grooves | web (mm): 33 | Material specific...
€1.223,31 €1.011,00 €1.162,10 €960,41
You save 5%
Eaton Driven gear wheel transmission
Eaton
Reference no.: 5169606 More
Reference no.: 5169606
€131,04 €108,30 €124,45 €102,85
You save 5%
LUK Thrust bearing 50 x 90 x 21,6 mm
LUK
Dimensions (mm): 50 x 90 x 21.6 More
Dimensions (mm): 50 x 90 x 21.6
€85,00 €70,25 €80,75 €66,74
You save 5%
LUK Clutch plate 310TDCA 40 x 45 mm, 16 splines, sintered
LUK
Dimensions (mm): 40 x 45 16 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 40 x 45 16 grooves | Material specifications: Sintere...
€269,15 €222,44 €255,65 €211,28
You save 5%
LUK Single clutch 310TBFR Case IH, Fiat, Ford, New Holland
€378,98 €313,21 €360,00 €297,52
You save 5%
Thrust bearing driving clutch complete Case IH, Fiat, Ford, New Holland
Cobo Headlight left H4, 12 V, built-in New Holland
Cobo
Installation location: Left | Bulb: 12V60/55W / H4 12V4WK / T4W 12V21WK / R21W | Nominal voltage (V): 12 | Mounting type: Flush mounting | Bulbs inclu... More
Installation location: Left | Bulb: 12V60/55W / H4 12V4WK / T4W 12V21W...
€333,05 €275,25 €316,35 €261,45
You save 5%
Eaton Drive pinion transmission 1,37 kg
Eaton
Reference no.: 5179673 More
Reference no.: 5179673
€218,77 €180,80 €207,80 €171,74
You save 5%
Eaton Main shaft transmission Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5161817 More
Reference no.: 5161817
€415,03 €343,00 €394,25 €325,83
You save 5%
Wabco Antifreeze pump 13 bar, 0,2 cm³, without control connection 4
Wabco
Connection: 1x M12 x 1.5 / 3x M22 x 1.5. Operating pressure max.: 13 bar. Delivery volume: 0.2 cm³. Contents: 500 ml. Version: • Prevents equipment... More
Connection: 1x M12 x 1.5 / 3x M22 x 1.5. Operating pressure max.: 13 b...
€288,66 €238,56 €274,20 €226,61
You save 5%
LUK Pilot bearing 17 x 40 x 12 mm
LUK
Dimensions: 17 x 40 x 12 mm. Menke no.: 167837. More
Dimensions: 17 x 40 x 12 mm. Menke no.: 167837.
€8,70 €7,19
Thrust washer Ø 325 mm Case IH, Fiat, New Holland
€101,58 €83,95 €96,50 €79,75
You save 5%
GRANIT Gear wheel PTO shaft 540 rpm. New Holland
GRANIT
Version: PTO shaft, 540 rpm. More
Version: PTO shaft, 540 rpm.
€162,62 €134,40 €154,45 €127,64
You save 5%
Showing 121 - 144 of 234

New Holland T5040 parts for clutch, linkage and drawbar

New Holland T5040 parts on this page number more than 200, supplied by GRANIT and by makers such as ROCKINGER, LUK, Sauermann and Eaton. They cover the clutch, the hydraulic lift, the hitch and the cab.

Many of these jobs are linked. If the tractor is being split for the clutch anyway, that is the moment to look at the gearbox seals and the PTO sensor as well. It stops you from starting all over again a few months later because of one small part.

Clutch work

Thrust bearings, single clutch pressure plates and clutch plates are all here, for example a thrust bearing for a single driving clutch. When you split the tractor for a clutch job, replace the pressure plate, the plate and the thrust bearing in one go. Reusing an old bearing that starts squealing a few months later means doing the whole job twice. While the engine and gearbox are apart, check the flywheel face for grooves and blue heat marks.

Lift cylinder, gears and sensors

Seals and sealing rings keep the linkage tight, including a seal for the outer lift cylinder and a sealing ring for the piston. There are also O-rings, springs and gear wheels, among them a gear for the reduction drive. A PTO sensor with a connection cable and plug, and contact switches, complete the electrical side.

Drawbar, seat and lights

For the rear there are drawbars, including an automatic one, and Piton Fix rails with a locking pin. In the cab you can fit an air suspended tractor seat in fabric and new gas struts, for example for the roof window. Rear lights are available as well. If an air suspended seat slowly sinks, the leak is usually at the air bag or its fitting. Brush on some soapy water with the compressor running and the bubbles will show you where.

Finding the correct part

Check the type plate to be certain the tractor is a T5040. A reference number on the old part makes the comparison much safer, especially with bearings and seals that look nearly identical from the outside. The T5040 sits in the New Holland T5000 series. If you also run another type from that series, use its own page: New Holland T5030, New Holland T5050, New Holland T5060 or New Holland T5070. All other models of the make are under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart