Menu
EUR

New Holland T5040 tractor parts & technical data

Which parts fit the New Holland T5040? We have selected more than 200 for the T5000 series, with trailer couplings, electrics and lighting among the groups.

234 parts found for New Holland T5040
Show:
GRANIT Sealing ring piston 110 x 114 x 4 mm Fiat, Ford, New Holland
GRANIT
Sealing ring piston 110 x 114 x 4 mm Fiat, Ford, New Holland
Dimensions: 110 x 114 x 4 mm.
€17,45 €14,42
 
Seal kit Hürlimann, Deutz-Fahr, Steyr
5%
Seal kit Hürlimann, Deutz-Fahr, Steyr
Reference no.: 47436943.
€78,26 €64,68 €74,30 €61,41
 
Sensor getriebeöl temperature
5%
Sensor getriebeöl temperature
Version: Sensor for transmission oil temperature.
€74,78 €61,80 €71,00 €58,68
 
GRANIT Lamp glass right, left
GRANIT
Lamp glass right, left
Installation location: Right, left.
€27,85 €23,02
 
Cobo Micro relays N/O-contact 12 V / 25 A, 4-pin, 6,3 mm, with holder
Cobo
Micro relays N/O-contact 12 V / 25 A, 4-pin, 6,3 mm, with holder
Version: 12 V / 25 A, With bracket, 4-pin, blade terminal 6.3 mm, With parallel ...
€35,15 €29,05
 
GRANIT Double clutch DuT 310 sintered, 40 x 45 mm, 16 splines
10%
GRANIT
Double clutch DuT 310 sintered, 40 x 45 mm, 16 splines
Material specifications: Sintered clutch lining | Additional information: Made i...
€768,97 €635,51 €695,70 €574,96
 
Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, 190 ccm oil
5%
Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, 190 ccm oil
No. of grooves: 4 | Oil quantity (ccm): 190 | Suitable oil: PAG 46 | Nominal vol...
€475,11 €392,65 €451,35 €373,02
 
LUK Clutch kit without release bearing Case IH, Fiat, Ford, New Holland
5%
LUK
Clutch kit without release bearing Case IH, Fiat, Ford, New Holland
Supplementary set: Without release bearing | Contents: Pressure plate 4581310249...
€651,74 €538,63 €619,15 €511,69
 
GRANIT Thrust bearing driving clutch single 50 x 80/89 x 22 mm
5%
GRANIT
Thrust bearing driving clutch single 50 x 80/89 x 22 mm
Dimensions (mm): 50 x 80/89 x 22
€48,82 €40,35 €46,35 €38,31
 
FEBI Transmission-oil filter W14005
70%
FEBI
Transmission-oil filter W14005
€144,29 €119,25 €43,19 €35,69
 
GRANIT Brake disc Ø 259 mm, thickness 9,6 mm, 14 teeth
5%
GRANIT
Brake disc Ø 259 mm, thickness 9,6 mm, 14 teeth
€107,69 €89,00 €102,30 €84,55
 
GRANIT Counterweight Case IH JX 90-95, JXU 75-115, MXU 100-130
5%
GRANIT
Counterweight Case IH JX 90-95, JXU 75-115, MXU 100-130
€1.237,15 €1.022,44 €1.175,25 €971,28
 
GRANIT Piston, complete 3 rings, piston pin Ø 38 x 82 mm, without cylinder liner
5%
GRANIT
Piston, complete 3 rings, piston pin Ø 38 x 82 mm, without cylinder liner
Dimensions: 3 rings, Gudgeon pin Ø 38 x 82 mm, Combustion chamber Ø 52.3 mm, Com...
€126,41 €104,47 €120,00 €99,17
 
GRANIT Thermostat gasket Case IH, Steyr, New Holland
5%
GRANIT
Thermostat gasket Case IH, Steyr, New Holland
€32,03 €26,47 €30,40 €25,12
 
GRANIT Intake gasket Case IH, Steyr, New Holland
GRANIT
Intake gasket Case IH, Steyr, New Holland
€2,19 €1,81
 
Cylinder head gasket 1,15 mm Case IH, Steyr, New Holland
5%
Cylinder head gasket 1,15 mm Case IH, Steyr, New Holland
€123,54 €102,10 €117,35 €96,98
 
GRANIT Idler pulley engine cooling Ø 65 mm Case IH, Steyr, New Holland
5%
GRANIT
Idler pulley engine cooling Ø 65 mm Case IH, Steyr, New Holland
Ø: 65 mm.
€208,57 €172,37 €198,10 €163,72
 
GRANIT Hinge for for- and rear window
GRANIT
Hinge for for- and rear window
€27,50 €22,73
 
Showing 193 - 216 of 234

New Holland T5040 parts for clutch, linkage and drawbar

New Holland T5040 parts on this page number more than 200, supplied by GRANIT and by makers such as ROCKINGER, LUK, Sauermann and Eaton. They cover the clutch, the hydraulic lift, the hitch and the cab.

Many of these jobs are linked. If the tractor is being split for the clutch anyway, that is the moment to look at the gearbox seals and the PTO sensor as well. It stops you from starting all over again a few months later because of one small part.

Clutch work

Thrust bearings, single clutch pressure plates and clutch plates are all here, for example a thrust bearing for a single driving clutch. When you split the tractor for a clutch job, replace the pressure plate, the plate and the thrust bearing in one go. Reusing an old bearing that starts squealing a few months later means doing the whole job twice. While the engine and gearbox are apart, check the flywheel face for grooves and blue heat marks.

Lift cylinder, gears and sensors

Seals and sealing rings keep the linkage tight, including a seal for the outer lift cylinder and a sealing ring for the piston. There are also O-rings, springs and gear wheels, among them a gear for the reduction drive. A PTO sensor with a connection cable and plug, and contact switches, complete the electrical side.

Drawbar, seat and lights

For the rear there are drawbars, including an automatic one, and Piton Fix rails with a locking pin. In the cab you can fit an air suspended tractor seat in fabric and new gas struts, for example for the roof window. Rear lights are available as well. If an air suspended seat slowly sinks, the leak is usually at the air bag or its fitting. Brush on some soapy water with the compressor running and the bubbles will show you where.

Finding the correct part

Check the type plate to be certain the tractor is a T5040. A reference number on the old part makes the comparison much safer, especially with bearings and seals that look nearly identical from the outside. The T5040 sits in the New Holland T5000 series. If you also run another type from that series, use its own page: New Holland T5030, New Holland T5050, New Holland T5060 or New Holland T5070. All other models of the make are under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart