Menu
EUR

New Holland T5040 tractor parts & technical data

Which parts fit the New Holland T5040? We have selected more than 200 for the T5000 series, with trailer couplings, electrics and lighting among the groups.

234 parts found for New Holland T5040
Show:
GRANIT Gear wheel PTO shaft 14 / 57 teeth Fiat, New Holland
5%
GRANIT
Gear wheel PTO shaft 14 / 57 teeth Fiat, New Holland
Number of teeth: 14/57.
€115,68 €95,60 €109,85 €90,79
 
GRANIT Shift ring transmission Fiat, New Holland
5%
GRANIT
Shift ring transmission Fiat, New Holland
€107,73 €89,03 €102,30 €84,55
 
GRANIT Spring clutch Fiat, Ford, New Holland
GRANIT
Spring clutch Fiat, Ford, New Holland
€1,61 €1,33
 
VICTOR REINZ Valve cover gasket Case IH, Steyr, New Holland
VICTOR REINZ
Valve cover gasket Case IH, Steyr, New Holland
€11,00 €9,09
 
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Ø: 98.59 x 88.27 x 5.16 mm.
€4,24 €3,50
 
GRANIT Water pump with gasket Case IH, Steyr, New Holland
5%
GRANIT
Water pump with gasket Case IH, Steyr, New Holland
Reference no.: S.68286.
€93,30 €77,11 €88,60 €73,22
 
GRANIT Seal glow plug Case IH, Steyr, New Holland
GRANIT
Seal glow plug Case IH, Steyr, New Holland
€1,86 €1,54
 
GRANIT Feed pump Case IH, New Holland engine F4C, F4DE04, F4DE06, 667TA
5%
GRANIT
Feed pump Case IH, New Holland engine F4C, F4DE04, F4DE06, 667TA
€37,44 €30,94 €35,55 €29,38
 
GRANIT Door lock, left Case IH JX 70U, MXM 190, New Holland T5030, TS120
5%
GRANIT
Door lock, left Case IH JX 70U, MXM 190, New Holland T5030, TS120
€211,65 €174,92 €201,00 €166,12
 
GRANIT Door lock, right Case IH JX 70U, MXM 190, New Holland T5030, TS115
5%
GRANIT
Door lock, right Case IH JX 70U, MXM 190, New Holland T5030, TS115
€211,65 €174,92 €201,00 €166,12
 
GRANIT Lock rear window lower
GRANIT
Lock rear window lower
€26,50 €21,90
 
GRANIT Handle right and left Case IH, New Holland
5%
GRANIT
Handle right and left Case IH, New Holland
€89,49 €73,96 €85,00 €70,25
 
GRANIT Sensor power take-off speed 23,5 mm with connection cable and plug
GRANIT
Sensor power take-off speed 23,5 mm with connection cable and plug
Version: Sensor, PTO shaft speed, 23.5 mm long, Connection cable with plug.
€63,15 €52,19
 
Sensor transmission PTO shaft, connection cable with plug, 3-pin
10%
Sensor transmission PTO shaft, connection cable with plug, 3-pin
Version: For PTO shaft, connection cable with plug connection, 3-pin.
€94,14 €77,80 €85,15 €70,37
 
Push button switch rear PTO shaft 48 V, button yellow, Ø 30 mm, stroke 5 mm
5%
Push button switch rear PTO shaft 48 V, button yellow, Ø 30 mm, stroke 5 mm
Version: 48 V switching voltage, Yellow button, break contact External switch on...
€45,80 €37,85 €43,50 €35,95
 
GRANIT Protective cap for rocker switch
GRANIT
Protective cap for rocker switch
€15,25 €12,60
 
GRANIT Rear light left / right 235 x 70 x 45 mm, 12 V
GRANIT
Rear light left / right 235 x 70 x 45 mm, 12 V
Bulb: 12V10WK / R10W, 12V21WK / P21W. Width: 235 mm. Form: Rectangular, short si...
€94,30 €77,93
 
Contact switch gear switch gray, with connector
10%
Contact switch gear switch gray, with connector
Version: Grey, connection cable with plug.
€138,26 €114,26 €125,00 €103,31
 
Sauermann Wear plate trailer coupling HS 1710-1KUD/3KUD
5%
Sauermann
Wear plate trailer coupling HS 1710-1KUD/3KUD
€172,30 €142,40 €163,65 €135,25
 
Sauermann Hitch handle complete for 87 mm brede geleidehuls
5%
Sauermann
Hitch handle complete for 87 mm brede geleidehuls
Description: For 87 mm wide saddle sleeve, new version | Reference no.: 84364249
€370,50 €306,20 €351,95 €290,87
 
Showing 145 - 168 of 234

New Holland T5040 parts for clutch, linkage and drawbar

New Holland T5040 parts on this page number more than 200, supplied by GRANIT and by makers such as ROCKINGER, LUK, Sauermann and Eaton. They cover the clutch, the hydraulic lift, the hitch and the cab.

Many of these jobs are linked. If the tractor is being split for the clutch anyway, that is the moment to look at the gearbox seals and the PTO sensor as well. It stops you from starting all over again a few months later because of one small part.

Clutch work

Thrust bearings, single clutch pressure plates and clutch plates are all here, for example a thrust bearing for a single driving clutch. When you split the tractor for a clutch job, replace the pressure plate, the plate and the thrust bearing in one go. Reusing an old bearing that starts squealing a few months later means doing the whole job twice. While the engine and gearbox are apart, check the flywheel face for grooves and blue heat marks.

Lift cylinder, gears and sensors

Seals and sealing rings keep the linkage tight, including a seal for the outer lift cylinder and a sealing ring for the piston. There are also O-rings, springs and gear wheels, among them a gear for the reduction drive. A PTO sensor with a connection cable and plug, and contact switches, complete the electrical side.

Drawbar, seat and lights

For the rear there are drawbars, including an automatic one, and Piton Fix rails with a locking pin. In the cab you can fit an air suspended tractor seat in fabric and new gas struts, for example for the roof window. Rear lights are available as well. If an air suspended seat slowly sinks, the leak is usually at the air bag or its fitting. Brush on some soapy water with the compressor running and the bubbles will show you where.

Finding the correct part

Check the type plate to be certain the tractor is a T5040. A reference number on the old part makes the comparison much safer, especially with bearings and seals that look nearly identical from the outside. The T5040 sits in the New Holland T5000 series. If you also run another type from that series, use its own page: New Holland T5030, New Holland T5050, New Holland T5060 or New Holland T5070. All other models of the make are under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart