Menu
EUR

New Holland T6080 tractor parts & technical data

Engine parts, electrics and trailer couplings for the New Holland T6080: this page holds more than 250 parts for the T6000 Power Command series.

285 parts found for New Holland T6080
Show:
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
You save 23%
Scharmüller Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
Scharmüller
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): 9,3 | Colour: Kubota grey | Version: Standard | Width (mm): 50 | Length (mm): 24... More
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): ...
€259,15 €214,17
Scharmüller Drawbar frame 16 kN, rail 200 mm, guide 25 mm, pin Ø 16 mm
Scharmüller
Guide width (mm): 25 | Load capacity (kg): 500 | Colour: Kubota grey | Version: Prepared for drawbar | Detent pin Ø (mm): 16 | Category: Bearing supp... More
Guide width (mm): 25 | Load capacity (kg): 500 | Colour: Kubota grey |...
€769,00 €635,54
Scharmüller Drawbar pin-Ø 31,5 mm, 387 mm, category 2, black
Scharmüller
Width (mm): 60 | Version: Standard | Height (mm): 30 | Length (mm): 387 | Trailer load (kg): 2500 | Colour: Black | Pin Ø (mm): 31,5 | Load capacity ... More
Width (mm): 60 | Version: Standard | Height (mm): 30 | Length (mm): 38...
€324,75 €268,39
Eaton Planetary gear transmission, 994 g
Eaton
Reference no.: 5145497 More
Reference no.: 5145497
€82,40 €68,10 €78,25 €64,67
You save 5%
GRANIT Alternator 14 V, 120 A, flange 83 mm, Case IH, New Holland, Steyr
GRANIT
Pulley Ø (mm): 61.0 | Direction of rotation: ↻ | Flange size (mm): 83,0 | Nominal voltage (V): 14 | Belt tension hole Ø / R (mm): M8 / 86,0 | Addi... More
Pulley Ø (mm): 61.0 | Direction of rotation: ↻ | Flange size (mm): ...
€241,75 €199,79 €229,65 €189,79
You save 5%
Wabco Compressor 11,5 bar, 159 cm³, Ø 75 mm, stroke 36 mm
Wabco
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Threa... More
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed:...
€1.815,00 €1.500,00 €1.724,25 €1.425,00
You save 5%
GRANIT PTO shaft end piece 182,6 mm, 1 3/8 inch 21 splines, 1000 rpm.
GRANIT
Version: Length 182.6 mm, 1 3/8", 21 grooves, 1000 rpm. Menke no.: 125042. More
Version: Length 182.6 mm, 1 3/8", 21 grooves, 1000 rpm. Menke no.: 125...
€329,35 €272,19 €312,85 €258,55
You save 5%
GRANIT Radiator 6 rows, connection upper Ø 10 mm, lower Ø 16 mm
GRANIT
To fit as: Case IH B-Family series, 553, 654, 724, 824, Puma series (Puma 115, 125, 140, 155, years 2007–2009), New Holland T6000 series Power Comma... More
To fit as: Case IH B-Family series, 553, 654, 724, 824, Puma series (P...
€1.956,87 €1.617,25 €1.859,00 €1.536,36
You save 5%
Air hose intercooler inner-Ø 63 mm, length 177 mm
Inner Ø: 63 mm. Length: 177 mm. More
Inner Ø: 63 mm. Length: 177 mm.
€205,09 €169,50 €194,80 €160,99
You save 5%
Mirror Case IH Farmall 85C, Puma 230 CVX, New Holland T4.85-T4.95
€72,68 €60,07 €65,75 €54,34
You save 10%
CBM Mechanical top link cat. 3, 647 - 913 mm, M36 x 3
CBM
I: M36 x 3 mm. A cat.: 28. B cat.: 3 / 60. C: 410 mm. D: 647 - 913 mm. K: 65 mm. H: 65 mm. Type: Tail hook/clevis joint. Top link type: mechanical. More
I: M36 x 3 mm. A cat.: 28. B cat.: 3 / 60. C: 410 mm. D: 647 - 913 mm....
€400,21 €330,75 €380,15 €314,17
You save 5%
Fender bracket right rotatable complete Case IH, Steyr, New Holland
€597,24 €493,59 €540,35 €446,57
You save 10%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.498,36 €1.238,31 €1.147,30 €948,18
You save 23%
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.379,23 €1.139,86 €1.219,75 €1.008,06
You save 12%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.108,13 €915,81 €933,36 €771,37
You save 16%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.221,12 €1.009,19 €1.028,50 €850,00
You save 16%
Sensor wheel speed Hall Matteffekt, connection cable with plug
Version: For speed, clutch block transmission (Hall effect), Connection cable with plug. More
Version: For speed, clutch block transmission (Hall effect), Connectio...
€112,05 €92,60 €106,40 €87,93
You save 5%
Number plate light 12V5WGLLS / W5W, 12 V
Bulb: 12V5WGLLS / W5W. Nominal voltage: 12 V. Type: Bulb. More
Bulb: 12V5WGLLS / W5W. Nominal voltage: 12 V. Type: Bulb.
€39,20 €32,40
HELLA Multifunction relay N/O-contact 12 V, 40 A, 4-pin, 6,3 mm
HELLA
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal 6.3 mm. More
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal 6.3 mm.
€18,15 €15,00
Stabilizer three-point Case IH, New Holland, Steyr
€144,47 €119,40 €137,20 €113,39
You save 5%
Sauermann Cover trailer coupling Ø 11 mm HS 1710-1KUD / 3KUD
Sauermann
Description: Ø 11 mm More
Description: Ø 11 mm
€143,59 €118,67 €136,40 €112,73
You save 5%
CARLISLE Internal plate PTO clutch 1,8 mm, 91 - 140 mm, 32 teeth
CARLISLE
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth More
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth
€25,24 €20,86 €23,95 €19,79
You save 5%
Filter dryer airco 220 mm, Ø 64 mm, M/F Case IH, New Holland, Steyr
Dimensions (mm): - | Connection thread A: 14.3 | Outer length (mm): 220 | Material: Steel | Pressure switch thread size: 10.5 mm | Weight (g): 500 | C... More
Dimensions (mm): - | Connection thread A: 14.3 | Outer length (mm): 22...
€58,27 €48,16 €55,35 €45,74
You save 5%
Showing 73 - 96 of 285

New Holland T6080 parts at a glance

More than 250 parts fit the New Holland T6080, and they fall into three broad groups: hitching and steering, the belt drive and cooling at the front of the engine, and the electrical items around the engine and cab. Here is what each group covers, with a few practical points from the workshop.

Belt drive and cooling

For the front of the engine there are belt kits with tensioner, cooling fans and sealing rings. If the ribbed belt squeals or shows cracks, replace the tensioner at the same time, since a tensioner with a worn bearing or a tired spring will let a new belt slip as well. Before removing anything, spin each pulley by hand: a bearing that feels rough or makes noise is best replaced now rather than when it seizes. Take a photo of the belt routing too, as it is easy to forget on an engine with several pulleys.

Hitching and steering

  • Automatic drawbars and drawbar frames
  • Piton Fix rails and a top drawbar
  • Height adjustable adapter plates
  • Forced steering for self steering trailers

Makers include Scharmüller, ROCKINGER, Sauermann and Walterscheid. Forced steering only works properly when the lock is tight at both ends, so check the ball and catch every time you swap trailers.

Electrics and cab

The electrical side covers sensors such as the transmission oil temperature sensor, an engine oil pressure switch and contact switches. Work lamps, mirrors and tank caps complete the picture. If the oil pressure light flickers on now and then while the engine sounds normal, look at the switch and its connector before suspecting the engine. A corroded contact is quick to find. Clean the connector, fit a new switch if needed and pack the plug with a little dielectric grease so moisture stays out. Low down on the engine, where spray and dirt collect, a well sealed connection lasts a lot longer.

Ordering for your T6080

Read the type plate first so you know it is a T6080. For the belt, compare the length and number of ribs on the old belt with the product, and for switches and sensors use the reference number on the old part. For drawbars and adapter plates, measure the rail width and hole pattern on the tractor itself.

Related pages

Its sibling in the T6000 range, the New Holland T6090, has its own page with the parts that fit that tractor. Do not assume parts are shared, check each model. For other New Holland models, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart