Menu
EUR

New Holland T7.170 tractor parts & technical data

Trailer couplings, electrics and engine parts for the New Holland T7.170: more than 300 parts that fit this tractor from the T7 series, on one clear page.

305 parts found for New Holland T7.170
Show:
Clutch housing Case IH Puma 115 - 165, New Holland T6030 - T7.210
8%
Clutch housing Case IH Puma 115 - 165, New Holland T6030 - T7.210
€783,48 €647,50 €720,80 €595,70
 
Wabco Air tank 15 l, Ø 246 mm, M22 x 1,5, 4 connections
4%
Wabco
Air tank 15 l, Ø 246 mm, M22 x 1,5, 4 connections
€148,56 €122,78 €142,37 €117,66
 
External plate 4 WD 1,5 mm, inner 100 mm, outer 152 mm, 6 teeth
External plate 4 WD 1,5 mm, inner 100 mm, outer 152 mm, 6 teeth
Version: Thickness: 1.5 mm Inner: 100 mm Outer: 152 mm 6 teeth
€11,19 €9,25
 
MAHLE Alternator 14 V, 200 A, flange 82 mm Case IH, New Holland, Steyr
40%
MAHLE
Alternator 14 V, 200 A, flange 82 mm Case IH, New Holland, Steyr
Charging current (A): 200 | Installation angle (°): r 68 | Form: A | Additional ...
€872,03 €720,69 €522,30 €431,65
 
MAHLE Alternator 14 V, 150 A, pulley-Ø 61 mm Case IH, New Holland, Steyr
40%
MAHLE
Alternator 14 V, 150 A, pulley-Ø 61 mm Case IH, New Holland, Steyr
Nominal values (V / A): 14 / 150 | Form: A | Belt width (mm) / type: PV x 8 | Mo...
€662,11 €547,20 €396,56 €327,74
 
Alternator 14 V / 120 A, flange 83 mm
8%
Alternator 14 V / 120 A, flange 83 mm
Flange size (mm): 83,0 | Nominal values (V / A): 14 / 120 | Additional informati...
€260,06 €214,93 €239,26 €197,73
 
Tensioning pulley Ø 57 mm Case IH, New Holland
8%
Tensioning pulley Ø 57 mm Case IH, New Holland
€47,03 €38,87 €43,27 €35,76
 
Main shaft PTO shaft end piece Case IH, Steyr, New Holland
8%
Main shaft PTO shaft end piece Case IH, Steyr, New Holland
€800,89 €661,89 €736,82 €608,94
 
Gear wheel transmission Case IH, New Holland
8%
Gear wheel transmission Case IH, New Holland
€421,42 €348,28 €387,71 €320,42
 
ROCKINGER Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
23%
ROCKINGER
Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D-value: 98...
€1.126,27 €930,80 €867,77 €717,17
 
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
8%
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/le...
€33,84 €27,97 €31,13 €25,73
 
Preheating relay 12 volt with plug connection
8%
Preheating relay 12 volt with plug connection
Version: 12 V, with plug connection.
€170,59 €140,98 €156,94 €129,70
 
Oil pressure switch engine 1/4 x 18 NPTF, 0,2 - 0,5 bar, blade terminal
Oil pressure switch engine 1/4 x 18 NPTF, 0,2 - 0,5 bar, blade terminal
Version: Thread: 1/4 x 18 NPTF, Switching pressure: 0.2 - 0.5 bar, blade termina...
€20,54 €16,97
 
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
8%
Sauermann
Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
 
Koppelingslamellenpakket Case IH, New Holland
8%
Koppelingslamellenpakket Case IH, New Holland
€206,88 €170,98 €190,33 €157,30
 
MAHLE Alternator 14 V / 120 A, flange 81 mm, pulley-Ø 67 mm
40%
MAHLE
Alternator 14 V / 120 A, flange 81 mm, pulley-Ø 67 mm
Mounting hole Ø / R (mm): 8,2 / 86,0 | Pulley Ø (mm): 67.0 | Charging current (A...
€515,34 €425,90 €308,66 €255,09
 
Sauermann Lock, complete 390 mm Case IH, New Holland, Steyr
8%
Sauermann
Lock, complete 390 mm Case IH, New Holland, Steyr
€509,47 €421,05 €468,71 €387,37
 
Torsion damper 14 teeth, profile 35 x 40 Case IH, New Holland, Steyr
8%
Torsion damper 14 teeth, profile 35 x 40 Case IH, New Holland, Steyr
Tooth profile: 35X40 | Number of teeth: 14
€555,96 €459,47 €511,48 €422,71
 
Track rod complete A 1564,5 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
8%
Track rod complete A 1564,5 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
A: 1564,5 mm. B: M18 x 1,5 mm. C: 20 mm. D: M18 x 1,5 mm. E: 40 mm.
€924,63 €764,16 €850,66 €703,02
 
LUK Torsion damper 14 teeth, 35X40 Case IH, Steyr, New Holland
8%
LUK
Torsion damper 14 teeth, 35X40 Case IH, Steyr, New Holland
Number of teeth: 14. Tooth profile: 35x40.
€650,89 €537,93 €598,82 €494,89
 
Master brake cylinder Case IH Puma 115-160 CVX, New Holland Series T7
8%
Master brake cylinder Case IH Puma 115-160 CVX, New Holland Series T7
€851,33 €703,58 €783,22 €647,29
 
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
1%
Scharmüller
Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 k...
€996,85 €823,84 €983,19 €812,56
 
Cooling fan Ø 550 mm Case IH, New Holland
8%
Cooling fan Ø 550 mm Case IH, New Holland
€339,26 €280,38 €312,12 €257,95
 
Air hose intercooler inner-Ø 65 / 75 mm, length 98 mm
8%
Air hose intercooler inner-Ø 65 / 75 mm, length 98 mm
Inner Ø: 65 / 75 mm. Length: 98 mm.
€70,43 €58,21 €64,80 €53,55
 
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
5%
Scharmüller
Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.070,65 €884,83 €1.013,17 €837,33
 
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
5%
Scharmüller
K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
 
Cobo Contact switch mechanical PTO shaft, brake light, 12 / 24 V, IP65
Cobo
Contact switch mechanical PTO shaft, brake light, 12 / 24 V, IP65
Version: For PTO, brake light, immobiliser, 12/24 V, power rating: 12 V: 5-12 A,...
€39,55 €32,69
 
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
21%
ROCKINGER
Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
Version: Lever upwards
€2.492,67 €2.060,06 €1.970,56 €1.628,56
 
Scharmüller Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
8%
Scharmüller
Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): 9,3 | Colo...
€269,09 €222,39 €247,56 €204,60
 
External plate 1,5 mm, inner 100 mm, outer 152 mm, 6 teeth
External plate 1,5 mm, inner 100 mm, outer 152 mm, 6 teeth
Version: Thickness: 1.5 mm Inner: 100 mm Outer: 152 mm 6 teeth
€11,19 €9,25
 
Seal kit hydraulic steering New Holland TM115-TM190
8%
Seal kit hydraulic steering New Holland TM115-TM190
€127,94 €105,74 €117,70 €97,28
 
Track rod 446 mm, M32 x 1,5
8%
Track rod 446 mm, M32 x 1,5
A: 446 mm. D: M32 x 1,5 mm. E: 46 mm.
€484,56 €400,46 €445,80 €368,43
 
Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
8%
Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm.
€225,87 €186,67 €207,80 €171,74
 
Tank cap thread 45 mm
Tank cap thread 45 mm
Version: Thread: 45 mm.
€22,91 €18,94
 
Injector Landini, New Holland, Steyr
8%
Injector Landini, New Holland, Steyr
Engine types: F4HF E613D B006, F4HF P613A H001, F4HF P613B H005.
€570,55 €471,53 €524,91 €433,81
 
Heating flange Case IH, New Holland
Heating flange Case IH, New Holland
€253,39 €209,41
 
Cork ring compressoras 20,83 x 31,75 x 8,13 mm Ford, New Holland
Cork ring compressoras 20,83 x 31,75 x 8,13 mm Ford, New Holland
Dimensions: Inner Ø 21, Outer Ø 32, Thickness 8 mm.
€2,48 €2,05
 
Air hose inlet manifold inner-Ø 57 / 76 mm, length 94 mm
8%
Air hose inlet manifold inner-Ø 57 / 76 mm, length 94 mm
Inner Ø: 57 / 76 mm. Length: 94 mm.
€69,05 €57,07 €63,53 €52,50
 
Filter outer-Ø 23 mm, bore Ø 8 mm, height 45 mm
Filter outer-Ø 23 mm, bore Ø 8 mm, height 45 mm
Dimensions: Outer Ø: 23, Hole Ø: 8 mm. Height: 45 mm.
€4,55 €3,76
 
Seal lift arm shaft 60 x 75 x 8,5 mm Fiat, Ford, New Holland
8%
Seal lift arm shaft 60 x 75 x 8,5 mm Fiat, Ford, New Holland
Dimensions: 60 x 75 x 8.5 SL mm.
€33,17 €27,41 €30,52 €25,22
 
Mirror 305 x 215 mm, heated, 12 V, left, rod Ø 16 - 22 mm
8%
Mirror 305 x 215 mm, heated, 12 V, left, rod Ø 16 - 22 mm
Dimensions: 305 x 215 mm. Height: 305 mm. Width: 215 mm. Version: Heated. Operat...
€200,38 €165,60 €184,35 €152,36
 
Mirror 145 x 195 mm for trailer hitch
Mirror 145 x 195 mm for trailer hitch
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. Additional information:...
€45,96 €37,99
 
Mirror 145 x 195 mm Case IH, New Holland
8%
Mirror 145 x 195 mm Case IH, New Holland
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€58,03 €47,96 €53,39 €44,12
 
Spring left fender Case IH, New Holland, Steyr
8%
Spring left fender Case IH, New Holland, Steyr
€51,26 €42,36 €47,16 €38,97
 
Showing 97 - 144 of 305

New Holland T7.170 parts for the hitch, engine and cab

A New Holland T7.170 rarely works without something on the back, be it a tipping trailer, a slurry tanker or a bale trailer. That is where wear shows up first: a worn pin, play in the slide rail or a latch that no longer locks cleanly. This page lists more than 300 parts matched to the T7.170, from the hitch system to the alternator and the cab mirrors.

Hitching: drawbars, Piton Fix and adapter plates

For the rear hitch there are automatic drawbars, complete drawbar frames, top drawbars and Piton Fix rails. With Piton Fix you slide a ball hitch, a swinging drawbar or a clevis into the same rail and secure it with a locking pin. Height adjustable adapter plates bring the hitch to the right height for the trailer drawbar. These components come from hitch specialists such as Scharmüller, ROCKINGER, Sauermann and Walterscheid. If you run a steered trailer, parts for forced steering are here as well.

A workshop tip: give the guide and locking pin of a Piton Fix rail a thin coat of grease every so often and check the pin for wear marks. Once it stops dropping fully into its hole, the hitch knocks in the rail under load and the rail itself starts to wear faster.

Engine and electrics

On the engine side you will find alternators, multi-rib belts and belt kits with tensioner and idler pulley, oil pressure switches, sensors and intercooler air hoses. When you replace the belt, look at the tensioner at the same time. A rough or loose tensioner pulley soon ruins a new belt. A split intercooler hose often gives itself away with a hiss under load and a tractor that pulls noticeably weaker. If the oil pressure warning comes on, check the oil level and measure the pressure with a gauge before you change the switch.

Alongside these there are hydraulic cylinders, cab mirrors and tank caps, with GRANIT covering everyday wear and service items.

Matching the right part to your T7.170

The quickest route is the old part itself. An alternator, sensor or cylinder nearly always carries a reference number, stamped in or on a label, and that number lets you check a replacement quickly. The type plate on the tractor confirms you are working on a T7.170 from the T7 series. For drawbars and adapter plates, the hole pattern and rail width on your tractor decide what fits.

Other tractors in the T7 series

If another T7 shares the yard with your T7.170, it has its own parts page: New Holland T7.200, New Holland T7.210, New Holland T7.220, New Holland T7.230, New Holland T7.245 and New Holland T7.260. Check the fit tractor by tractor, since details differ even within one series. Every other model from the brand is collected under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart