Menu
EUR

New Holland T7.235 tractor parts & technical data

Skip the searching: this page has more than 250 parts for the New Holland T7.235 in the T7 series, among them trailer couplings, electrics and steering parts.

265 parts found for New Holland T7.235
Show:
Filter dryer airco 220 mm, Ø 64 mm, M/F Case IH, New Holland, Steyr
Dimensions (mm): - | Connection thread A: 14.3 | Outer length (mm): 220 | Material: Steel | Pressure switch thread size: 10.5 mm | Weight (g): 500 | C... More
Dimensions (mm): - | Connection thread A: 14.3 | Outer length (mm): 22...
€58,27 €48,16 €55,35 €45,74
You save 5%
GRANIT Cylinder hydraulic steering Case IH, New Holland
€435,54 €359,95 €413,75 €341,94
You save 5%
Ball joint taper 24 - 26 mm, length 100 mm, M20 x 1,5, M24 x 1,5
A: 100 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 100 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€57,46 €47,49 €54,55 €45,08
You save 5%
Track rod 1632 mm, 23,5 - 26,4 mm, 40 mm
A: 1632 mm. C: 23,5 - 26,4 mm. G: . E: 40 mm. More
A: 1632 mm. C: 23,5 - 26,4 mm. G: . E: 40 mm.
€396,00 €327,27 €376,20 €310,91
You save 5%
GRANIT Brake disc front axle Ø 246 mm, thickness 4,5 mm, 42 teeth
€61,41 €50,75 €58,30 €48,18
You save 5%
GRANIT Ring gear Ø 384/410 mm, 127 teeth Case IH, New Holland
GRANIT
Version: Ø 384/410 mm, 127 teeth. More
Version: Ø 384/410 mm, 127 teeth.
€272,49 €225,20 €258,85 €213,93
You save 5%
GRANIT As transmission 248,4 mm Case IH, Steyr, New Holland
GRANIT
Length: 248,4 mm. More
Length: 248,4 mm.
€368,84 €304,83 €350,35 €289,55
You save 5%
Scharmüller Adapter plate rail width 325 mm, hole pattern 140 x 80 mm, M16
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pattern: 140 x 80 mm. Guide width: 26 mm. Plate height: 133 mm. Thread: M16. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pat...
€531,07 €438,90 €469,65 €388,14
You save 12%
Borg Warner Cooling fan Ø 620 mm, 9 vanes
Borg Warner
Ø: 620 mm. Notes: 9 Flügel. To fit: Case IH, New Holland, Steyr. More
Ø: 620 mm. Notes: 9 Flügel. To fit: Case IH, New Holland, Steyr.
€178,40 €147,44 €156,60 €129,42
You save 12%
GRANIT Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
€14,30 €11,82
GRANIT Pressure pipe Tector 6 / 7 Case IH, Steyr, New Holland
GRANIT
Installation location: Tector 6 / 7. More
Installation location: Tector 6 / 7.
€52,65 €43,51 €50,00 €41,32
You save 5%
GRANIT Idler pulley outer-Ø 74 mm, width 47 mm Case IH, Steyr, New Holland
GRANIT
Outer Ø: 74 mm. Width: 47 mm. More
Outer Ø: 74 mm. Width: 47 mm.
€109,71 €90,67 €104,20 €86,12
You save 5%
Cover fender
€18,15 €15,00
Lift arm right 490 - 610 mm, Ø-upper 16 mm, Ø-lower 19 mm
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis inside = 25 mm. Installation location: rechts. More
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis in...
€477,82 €394,89 €453,90 €375,12
You save 5%
GRANIT Mirror 145 x 195 mm Case IH, New Holland
GRANIT
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. More
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€55,61 €45,96 €52,80 €43,64
You save 5%
Base plate fender pin Ø 25 mm Case IH, New Holland
€118,52 €97,95 €112,55 €93,02
You save 5%
Scharmüller Drawbar K80 manual, rail 325 mm, pin Ø 25 mm, 2000 kg, black
Scharmüller
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000 kg. D-value: 83,9 kN. Plate height: 133 mm. Colour: Black. Overhang:... More
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load cap...
€1.364,41 €1.127,61 €1.149,20 €949,75
You save 16%
GRANIT Spiegelarm left Case IH, New Holland
€184,59 €152,55 €175,35 €144,92
You save 5%
Sensor wheel speed Hall Matteffekt, connection cable with plug
Version: For speed, clutch block transmission (Hall effect), Connection cable with plug. More
Version: For speed, clutch block transmission (Hall effect), Connectio...
€112,05 €92,60 €106,40 €87,93
You save 5%
GRANIT Sensor laadluchttemperatuur
GRANIT
Version: For charge air temperature. More
Version: For charge air temperature.
€61,59 €50,90 €58,50 €48,35
You save 5%
GRANIT Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
GRANIT
Version: Rotation angle sensor (position), electronic linkage control, For clutch and brake operation. More
Version: Rotation angle sensor (position), electronic linkage control,...
€152,54 €126,07 €138,00 €114,05
You save 10%
GRANIT Contact switch mechanical brake light and start safety switch
GRANIT
Version: Brake light and start safety switch. More
Version: Brake light and start safety switch.
€33,55 €27,73 €31,85 €26,32
You save 5%
GRANIT Push button switch PTO shaft with connection cable and plug
GRANIT
Version: Front PTO operation, Connection cable with plug. More
Version: Front PTO operation, Connection cable with plug.
€194,61 €160,83 €176,00 €145,45
You save 10%
Showing 121 - 144 of 265

New Holland T7.235 parts

Hitching, hydraulics and the cab

A New Holland T7.235 does a lot of coupling and uncoupling, and a lot of lifting. This page holds more than 250 new parts that fit the T7.235, from GRANIT, Scharmüller, ROCKINGER, Sauermann and Walterscheid.

At the back you will find automatic drawbars and automatic hitches, the Piton Fix, top drawbars and height adjustable adapter plates. For trailers with forced steering there are welded parts with a lock, and for the air brake there are connector heads. On the linkage side there are hydraulic cylinders and a hydraulic top link. In the cab there are mirrors, push button switches and tractor seats, for example an air suspended fabric seat. An alternator completes the electrical side.

Sensors on the T7.235

Two sensors stand out for this tractor: a temperature sensor for the transmission oil and an oil pressure switch for the steering. A practical tip if the dash warns about transmission oil temperature: check the oil level and the cooler for chaff and dust first, as a blocked cooler gives a real high reading. If the oil is cool and the warning still comes on, look at the plug and wiring of the sensor before replacing it. Fit the new sensor with a fresh sealing washer and top up any oil you lose.

Keeping the automatic hitch safe

An automatic hitch is only as good as its coupling pin. Check the pin and its bush for wear regularly, because slack shows up as a knock every time you pull away or brake. Grease the mechanism sparingly, since too much grease holds on to grit. After every hitching, check with your own eyes that the lock is fully closed before you drive off.

Choosing the right part

The T7.235 belongs to the New Holland T7 series. Take the model and serial number from the type plate. Hitch parts are matched on rail width and coupling pin, so measure the old one if the markings are gone. Sensors, switches and the alternator carry a reference number you can check against the product description.

Other T7 tractors

These models from the same series each have their own page with the parts confirmed for them:

The T7.190, the T7.260 and the rest of the brand are under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart