Menu
EUR

New Holland T7.235 tractor parts & technical data

Skip the searching: this page has more than 250 parts for the New Holland T7.235 in the T7 series, among them trailer couplings, electrics and steering parts.

265 parts found for New Holland T7.235
Show:
Filter dryer airco 220 mm, Ø 64 mm, M/F Case IH, New Holland, Steyr
5%
Filter dryer airco 220 mm, Ø 64 mm, M/F Case IH, New Holland, Steyr
Dimensions (mm): - | Connection thread A: 14.3 | Outer length (mm): 220 | Materi...
€58,27 €48,16 €55,35 €45,74
 
GRANIT Cylinder hydraulic steering Case IH, New Holland
5%
GRANIT
Cylinder hydraulic steering Case IH, New Holland
€435,54 €359,95 €413,75 €341,94
 
Ball joint taper 24 - 26 mm, length 100 mm, M20 x 1,5, M24 x 1,5
5%
Ball joint taper 24 - 26 mm, length 100 mm, M20 x 1,5, M24 x 1,5
A: 100 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 ...
€57,46 €47,49 €54,55 €45,08
 
Track rod 1632 mm, 23,5 - 26,4 mm, 40 mm
5%
Track rod 1632 mm, 23,5 - 26,4 mm, 40 mm
A: 1632 mm. C: 23,5 - 26,4 mm. G: . E: 40 mm.
€396,00 €327,27 €376,20 €310,91
 
GRANIT Brake disc front axle Ø 246 mm, thickness 4,5 mm, 42 teeth
5%
GRANIT
Brake disc front axle Ø 246 mm, thickness 4,5 mm, 42 teeth
€61,41 €50,75 €58,30 €48,18
 
GRANIT Ring gear Ø 384/410 mm, 127 teeth Case IH, New Holland
5%
GRANIT
Ring gear Ø 384/410 mm, 127 teeth Case IH, New Holland
Version: Ø 384/410 mm, 127 teeth.
€272,49 €225,20 €258,85 €213,93
 
GRANIT As transmission 248,4 mm Case IH, Steyr, New Holland
5%
GRANIT
As transmission 248,4 mm Case IH, Steyr, New Holland
Length: 248,4 mm.
€368,84 €304,83 €350,35 €289,55
 
Scharmüller Adapter plate rail width 325 mm, hole pattern 140 x 80 mm, M16
12%
Scharmüller
Adapter plate rail width 325 mm, hole pattern 140 x 80 mm, M16
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pattern: 140 ...
€531,07 €438,90 €469,65 €388,14
 
Borg Warner Cooling fan Ø 620 mm, 9 vanes
12%
Borg Warner
Cooling fan Ø 620 mm, 9 vanes
Ø: 620 mm. Notes: 9 Flügel. To fit: Case IH, New Holland, Steyr.
€178,40 €147,44 €156,60 €129,42
 
GRANIT Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
GRANIT
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
Thread: M22 x 1.5.
€14,30 €11,82
 
GRANIT Pressure pipe Tector 6 / 7 Case IH, Steyr, New Holland
5%
GRANIT
Pressure pipe Tector 6 / 7 Case IH, Steyr, New Holland
Installation location: Tector 6 / 7.
€52,65 €43,51 €50,00 €41,32
 
GRANIT Idler pulley outer-Ø 74 mm, width 47 mm Case IH, Steyr, New Holland
5%
GRANIT
Idler pulley outer-Ø 74 mm, width 47 mm Case IH, Steyr, New Holland
Outer Ø: 74 mm. Width: 47 mm.
€109,71 €90,67 €104,20 €86,12
 
Cover fender
Cover fender
€18,15 €15,00
 
Lift arm right 490 - 610 mm, Ø-upper 16 mm, Ø-lower 19 mm
5%
Lift arm right 490 - 610 mm, Ø-upper 16 mm, Ø-lower 19 mm
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis inside = 25 mm...
€477,82 €394,89 €453,90 €375,12
 
GRANIT Mirror 145 x 195 mm Case IH, New Holland
5%
GRANIT
Mirror 145 x 195 mm Case IH, New Holland
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€55,61 €45,96 €52,80 €43,64
 
Base plate fender pin Ø 25 mm Case IH, New Holland
5%
Base plate fender pin Ø 25 mm Case IH, New Holland
€118,52 €97,95 €112,55 €93,02
 
Scharmüller Drawbar K80 manual, rail 325 mm, pin Ø 25 mm, 2000 kg, black
16%
Scharmüller
Drawbar K80 manual, rail 325 mm, pin Ø 25 mm, 2000 kg, black
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000...
€1.364,41 €1.127,61 €1.149,20 €949,75
 
GRANIT Spiegelarm left Case IH, New Holland
5%
GRANIT
Spiegelarm left Case IH, New Holland
€184,59 €152,55 €175,35 €144,92
 
Sensor wheel speed Hall Matteffekt, connection cable with plug
5%
Sensor wheel speed Hall Matteffekt, connection cable with plug
Version: For speed, clutch block transmission (Hall effect), Connection cable wi...
€112,05 €92,60 €106,40 €87,93
 
GRANIT Sensor laadluchttemperatuur
5%
GRANIT
Sensor laadluchttemperatuur
Version: For charge air temperature.
€61,59 €50,90 €58,50 €48,35
 
GRANIT Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
10%
GRANIT
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
Version: Rotation angle sensor (position), electronic linkage control, For clutc...
€152,54 €126,07 €138,00 €114,05
 
GRANIT Contact switch mechanical brake light and start safety switch
5%
GRANIT
Contact switch mechanical brake light and start safety switch
Version: Brake light and start safety switch.
€33,55 €27,73 €31,85 €26,32
 
GRANIT Push button switch PTO shaft with connection cable and plug
10%
GRANIT
Push button switch PTO shaft with connection cable and plug
Version: Front PTO operation, Connection cable with plug.
€194,61 €160,83 €176,00 €145,45
 
Showing 121 - 144 of 265

New Holland T7.235 parts

Hitching, hydraulics and the cab

A New Holland T7.235 does a lot of coupling and uncoupling, and a lot of lifting. This page holds more than 250 new parts that fit the T7.235, from GRANIT, Scharmüller, ROCKINGER, Sauermann and Walterscheid.

At the back you will find automatic drawbars and automatic hitches, the Piton Fix, top drawbars and height adjustable adapter plates. For trailers with forced steering there are welded parts with a lock, and for the air brake there are connector heads. On the linkage side there are hydraulic cylinders and a hydraulic top link. In the cab there are mirrors, push button switches and tractor seats, for example an air suspended fabric seat. An alternator completes the electrical side.

Sensors on the T7.235

Two sensors stand out for this tractor: a temperature sensor for the transmission oil and an oil pressure switch for the steering. A practical tip if the dash warns about transmission oil temperature: check the oil level and the cooler for chaff and dust first, as a blocked cooler gives a real high reading. If the oil is cool and the warning still comes on, look at the plug and wiring of the sensor before replacing it. Fit the new sensor with a fresh sealing washer and top up any oil you lose.

Keeping the automatic hitch safe

An automatic hitch is only as good as its coupling pin. Check the pin and its bush for wear regularly, because slack shows up as a knock every time you pull away or brake. Grease the mechanism sparingly, since too much grease holds on to grit. After every hitching, check with your own eyes that the lock is fully closed before you drive off.

Choosing the right part

The T7.235 belongs to the New Holland T7 series. Take the model and serial number from the type plate. Hitch parts are matched on rail width and coupling pin, so measure the old one if the markings are gone. Sensors, switches and the alternator carry a reference number you can check against the product description.

Other T7 tractors

These models from the same series each have their own page with the parts confirmed for them:

The T7.190, the T7.260 and the rest of the brand are under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart