Menu
EUR

New Holland T7.245 tractor parts & technical data

Steering and front axle, electrics and trailer couplings: more than 200 parts that fit the New Holland T7.245 from the T7 series, clearly grouped together.

226 parts found for New Holland T7.245
Show:
Track rod 1632 mm, 23,5 - 26,4 mm, 40 mm
A: 1632 mm. C: 23,5 - 26,4 mm. G: . E: 40 mm. More
A: 1632 mm. C: 23,5 - 26,4 mm. G: . E: 40 mm.
€413,22 €341,50 €380,16 €314,18
You save 8%
Brake pad lining on one side Case IH, Steyr, New Holland
€35,77 €29,56 €32,91 €27,20
You save 8%
Ring gear Ø 384/410 mm, 127 teeth Case IH, New Holland
Version: Ø 384/410 mm, 127 teeth. More
Version: Ø 384/410 mm, 127 teeth.
€284,35 €235,00 €261,60 €216,20
You save 8%
As transmission 248,4 mm Case IH, Steyr, New Holland
€384,89 €318,09 €354,10 €292,64
You save 8%
Heating element Case IH, New Holland
€274,29 €226,69 €252,35 €208,55
You save 8%
Thermostat Ø 60,5 mm, 81 °C Case IH, Steyr, New Holland
Ø: 60,5 mm. Temperature: 81 °C. More
Ø: 60,5 mm. Temperature: 81 °C.
€47,95 €39,63 €44,11 €36,46
You save 8%
AdBlue supply unit Case IH, Steyr, New Holland
Description: AdBlue supply units ensure even metering of AdBlue depending on the load on the common rail engine. It is important that only filtered ur... More
Description: AdBlue supply units ensure even metering of AdBlue depend...
€1.623,63 €1.341,84 €1.493,74 €1.234,50
You save 8%
Temperature sensor -40 up to 850 °C, curved, 50 mm, with resistor
Description: Oxidation catalyst. Version: -40 to 850°C. More
Description: Oxidation catalyst. Version: -40 to 850°C.
€117,72 €97,29 €108,30 €89,51
You save 8%
Fan clutch Case IH, Steyr, New Holland
€479,01 €395,88 €440,69 €364,21
You save 8%
Crank adjuster Case IH, Steyr, New Holland
€96,97 €80,14 €89,21 €73,73
You save 8%
Hydraulic top link cat. 3, 690 - 956 mm, stroke 266 mm, 11 ton
A cat.: 3 / 32. B cat.: 3 / 32. F: 690 / 956 mm. Piston rod Ø D: 45 mm. Cylinder Ø inner E: 90 mm. Lifting force: 11 t. Tensile force: 8 t. Adjustab... More
A cat.: 3 / 32. B cat.: 3 / 32. F: 690 / 956 mm. Piston rod Ø D: 45 m...
€724,10 €598,43 €666,17 €550,56
You save 8%
Fender bracket left complete Puma CVX 185-240
€697,74 €576,64 €641,92 €530,51
You save 8%
Fender bracket right complete Puma CVX 185-240
€697,74 €576,64 €641,92 €530,51
You save 8%
Spring right fender Case IH, New Holland, Steyr
€46,02 €38,03 €42,34 €34,99
You save 8%
Scharmüller Drawbar K80 manual, rail 325 mm, pin Ø 25 mm, 2000 kg, black
Scharmüller
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000 kg. D-value: 83,9 kN. Plate height: 133 mm. Colour: Black. Overhang:... More
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load cap...
€1.368,70 €1.131,16 €1.247,49 €1.030,99
You save 9%
ROCKINGER Drawbar without sensor rail 390 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.013,32 €837,45 €780,74 €645,24
You save 23%
Scharmüller Automatic hitch rail width 255 mm, coupling pin 38 mm
Scharmüller
Rail width: 255 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 255 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.236,75 €1.022,11 €1.083,22 €895,22
You save 12%
Cylinder New Holland, Steyr
€629,21 €520,01 €578,87 €478,41
You save 8%
Oil pressure switch steering, 2 blade connections
Version: 2 blade terminals, Also suitable for: four-wheel drive, power shuttle and differential lock. More
Version: 2 blade terminals, Also suitable for: four-wheel drive, power...
€81,29 €67,18 €74,79 €61,81
You save 8%
Sensor wheel speed Hall Matteffekt, connection cable with plug
Version: For speed, clutch block transmission (Hall effect), Connection cable with plug. More
Version: For speed, clutch block transmission (Hall effect), Connectio...
€116,92 €96,63 €107,57 €88,90
You save 8%
Rotary switch fan 4-stage, without knob, 6 connections
Version: For blower, 4-speed, 6 blade terminals. More
Version: For blower, 4-speed, 6 blade terminals.
€114,89 €94,95 €105,70 €87,35
You save 8%
Starter switch without key, connection cable with plug
Version: Connection cable with plug, Key 50717018. More
Version: Connection cable with plug, Key 50717018.
€101,02 €83,49 €92,94 €76,81
You save 8%
ROCKINGER Drawbar automatic 48,7 mm, 390 / 25 / 32 mm, 2000 kg, 93,6 kN
€3.095,11 €2.557,94 €2.434,74 €2.012,18
You save 21%
Compressed air sensor M12 x 1,5 Case IH, New Holland
Connection: M12 x 1,5. More
Connection: M12 x 1,5.
€278,47 €230,14
Brake pad pad on both sides Case IH, Steyr, New Holland
suitable for: Case IH. Tractor types: MXM 175, 190, 200, Puma 165, 170, 180, 185, 195, 210, 215, Puma CVX 165, 170, 180, 185, 195, 200, 210, 215, 225,... More
suitable for: Case IH. Tractor types: MXM 175, 190, 200, Puma 165, 170...
€64,82 €53,57 €59,63 €49,28
You save 8%
O-ring hand brake Ø 294,1 x 3,4 mm Case IH, New Holland, Steyr
€52,65 €43,51 €48,44 €40,03
You save 8%
Master brake cylinder mineral oil Case IH, Steyr, New Holland
€1.032,20 €853,06 €949,62 €784,81
You save 8%
PTO shaft end piece 182,6 mm, 1 3/8 inch 21 splines, 1000 rpm.
Version: Length 182.6 mm, 1 3/8", 21 grooves, 1000 rpm. Menke no.: 125042. More
Version: Length 182.6 mm, 1 3/8", 21 grooves, 1000 rpm. Menke no.: 125...
€343,68 €284,03 €316,19 €261,31
You save 8%
PTO shaft end piece 182,5 mm, 1 3/8 inch 6 grooves, 540 rpm.
Version: Length 182.5 mm, 1 3/8", 6 grooves, 540 rpm. More
Version: Length 182.5 mm, 1 3/8", 6 grooves, 540 rpm.
€354,81 €293,23 €326,43 €269,77
You save 8%
Brake piston Ø 245 x 400 x 29 mm Case IH, New Holland
€332,20 €274,55 €305,62 €252,58
You save 8%
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170. Fleetguard no.: UF101. Hifi no.: SD70380. Hengst no.: E103UD295. More
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no....
€59,17 €48,90 €54,44 €44,99
You save 8%
Water pump Case IH Maxxum 110-150, Puma 115-240, Vestrum 100-130
Description: With Tier 4A/B and Stage V machines, note the engine type.. More
Description: With Tier 4A/B and Stage V machines, note the engine type...
€118,57 €97,99 €109,08 €90,15
You save 8%
Tank cap Case IH, New Holland, Steyr
€45,08 €37,26 €41,47 €34,28
You save 8%
Ammonia sensor exhaust gas NH3, 8-pin, 1.000 mm
Description: Model year 07/17 ->. More
Description: Model year 07/17 ->.
€860,01 €710,75 €791,21 €653,89
You save 8%
Temperature sensor straight 50 mm Case IH, New Holland, Steyr
Description: SCR/oxidation catalytic converter. More
Description: SCR/oxidation catalytic converter.
€108,01 €89,26 €99,37 €82,12
You save 8%
Idler pulley outer-Ø 74 mm, width 47 mm Case IH, Steyr, New Holland
Outer Ø: 74 mm. Width: 47 mm. More
Outer Ø: 74 mm. Width: 47 mm.
€114,48 €94,61 €105,32 €87,04
You save 8%
Crankshaft seal for Case IH, Steyr, New Holland
€36,09 €29,83 €33,20 €27,44
You save 8%
Cover fender
€18,94 €15,65
Hinge for rear screen, right Case IH, New Holland
€106,59 €88,09 €98,06 €81,04
You save 8%
Lift arm right 490 - 610 mm, Ø-upper 16 mm, Ø-lower 19 mm
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis inside = 25 mm. Installation location: rechts. More
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis in...
€498,60 €412,07 €458,71 €379,10
You save 8%
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unheated. Rod Ø: 10 - 22 mm. More
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unhe...
€48,90 €40,41 €44,99 €37,18
You save 8%
Mirror Case IH Farmall 85C, Puma 230 CVX, New Holland T4.85-T4.95
Sauermann Bolt lock complete trailer coupling HS 1710-1KUD/3KUD
€337,88 €279,24 €310,85 €256,90
You save 8%
Scharmüller Drawbar inner part 311 mm, coupling pin 38 mm, 2500 kg
Scharmüller
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 89,3 kN. Colour: AGCO grey. Desc... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.211,09 €1.000,90 €1.114,20 €920,83
You save 8%
Scharmüller Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
Scharmüller
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 180 mm. Plate height: 133 mm. Hole: M20... More
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load cap...
€1.123,39 €928,42 €1.033,52 €854,15
You save 8%
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800 kg. D-value: 89,3 kN. Central hole: 95 mm. Hole pattern: 160 x 100 m... More
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€1.150,89 €951,15 €909,90 €751,99
You save 21%
Telescopic mirror bracket left Case IH, New Holland
Installation location: Left. More
Installation location: Left.
€263,89 €218,09 €242,78 €200,64
You save 8%
Showing 145 - 192 of 226

New Holland T7.245 parts: sensors, hitches and more

On a modern tractor like the T7.245, trouble often announces itself with a warning on the display first. A good share of the more than 200 parts on this page relate to exactly that: NOx sensors in the exhaust, temperature sensors, other sensors and an oil pressure switch for the steering.

Before you change a NOx sensor

Look at the wiring and the plug first. The sensor lives in the heat of the exhaust, and its cable often runs close to hot components or rubs against something. A chafed wire or a plug with green corrosion throws the same fault as a dead sensor. Undo the old sensor while the exhaust is still lukewarm, as it comes out more easily. Only grease the thread of the new one if it already carries heat resistant paste or the sensor instructions say so. With temperature sensors the plug is a known weak spot too. Push it home firmly until you hear the latch click.

Heavy haulage at the back

A T7.245 often pulls heavy trailers, and that calls for solid couplings. This page carries drawbars and Piton Fix couplings for wide rails, adapter plates, automatic hitches, top drawbars and drawbar frames. For trailers with forced steering there are matching ball pieces, and for the hydraulics there are hydraulic cylinders.

The rail width of the existing frame decides which coupling fits, so measure it first. An automatic hitch also has a coupling pin that has to suit the drawbar eye of your trailer. On a hitch that has been working for years, check the wear bush as well. A worn bush means play in the coupling, and play means shocks through the whole rig.

Also on this page

  • Alternators for the charging circuit
  • Mirrors
  • Tank caps

The parts come from GRANIT, Scharmüller, ROCKINGER, Sauermann and FEBI. They are new parts from these manufacturers, not dealer supplies.

Matching and related models

Read the data plate to confirm you have a T7.245, and compare the reference number on the old part with the new one. That matters even more with sensors, where plug and thread can differ between versions. These tractors from the T7 series have their own pages too: New Holland T7.210, New Holland T7.230, New Holland T7.170, New Holland T7.220, New Holland T7.200 and New Holland T7.260. The T7.190 and T7.315 belong to the series as well. Everything from New Holland is under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart