Menu
EUR

New Holland T7.260 tractor parts & technical data

Working on a New Holland T7.260? This page brings together more than 300 parts that fit, including trailer couplings, electrics, steering and front axle parts.

317 parts found for New Holland T7.260
Show:
Aircon compressor 12 V, Ø 119 mm, 10 grooves Case IH, New Holland, Steyr
Cylinder capacity (cm³): 155 | No. of grooves: 10 | Refrigerant: R 134a | Fixing: DM | Suitable oil: PAG 46 | Connection: 3/4"" x 7/8"", horizontal |... More
Cylinder capacity (cm³): 155 | No. of grooves: 10 | Refrigerant: R 13...
€560,74 €463,42 €515,88 €426,35
You save 8%
MAHLE Alternator 14 V, 150 A, flange 56 mm Case IH, New Holland, Steyr
MAHLE
Nominal values (V / A): 14 / 150 | Installation angle (°): l 60 | Mounting hole Ø / R (mm): 10,2 / 90,0 | Flange size (mm): 56,0 | Pulley spacing (m... More
Nominal values (V / A): 14 / 150 | Installation angle (°): l 60 | Mou...
€540,05 €446,32 €323,46 €267,33
You save 40%
Alternator 14 V / 200 A, pulley-Ø 61 mm, flange 56 mm
Pulley spacing (mm): 27,6 | Installation angle (°): l 60 | Form: B | Charging current (A): 200 | Pulley Ø (mm): 61.0 | Mounting hole Ø / R (mm): 10... More
Pulley spacing (mm): 27,6 | Installation angle (°): l 60 | Form: B | ...
€405,87 €335,43 €373,40 €308,60
You save 8%
Alternator 14 V / 150 A, flange 56 mm, pulley Ø 61 mm
€287,79 €237,84 €264,77 €218,82
You save 8%
Vitesco NOX sensor M20 x 1,5, 615 mm, 12 / 24 V Case IH, New Holland, Steyr
€840,94 €694,99 €773,66 €639,39
You save 8%
Ball joint 120 mm, C M20 x 1,5, D M24 x 1,5, taper 24 - 26 mm
A: 120 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 120 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€59,82 €49,44 €55,03 €45,48
You save 8%
Gear wheel transmission Case IH, New Holland
€421,42 €348,28 €387,71 €320,42
You save 8%
ROCKINGER Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
ROCKINGER
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D-value: 98,1 kN. Hole: M21 mm. No. of holes: 4. Colour: Black. More
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Scharmüller Drawbar rail 311 mm, coupling pin 31 mm, AGCO gray
Scharmüller
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2500 kg. D-value: 89,3 kN. Colour: AGCO grey. Desc... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.157,46 €956,58 €1.064,86 €880,05
You save 8%
Silencer with afzuiging Case IH, New Holland
€695,64 €574,91 €639,99 €528,92
You save 8%
Sensor AdBlue-quality Case IH, Steyr, New Holland
Description: For AdBlue quality. More
Description: For AdBlue quality.
€923,71 €763,40
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 1800 mm. Reference no.: 81637330032. Applicat... More
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location...
€33,84 €27,97 €31,13 €25,73
You save 8%
Preheating relay 12 volt with plug connection
Version: 12 V, with plug connection. More
Version: 12 V, with plug connection.
€170,59 €140,98 €156,94 €129,70
You save 8%
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
You save 8%
Koppelingslamellenpakket Case IH, New Holland
€206,88 €170,98 €190,33 €157,30
You save 8%
Scharmüller Hitch automatic 82,4 kN, rail 311 mm, locking pin Ø 22 mm
Scharmüller
Plate height (mm): 120 | Detent pin Ø (mm): 22 | D-value (kN): 82,4 | Rail width (mm): 311 | Load capacity (kg): 2000 | Load capacity (t): 2 | Guide ... More
Plate height (mm): 120 | Detent pin Ø (mm): 22 | D-value (kN): 82,4 |...
€1.171,76 €968,40 €1.078,02 €890,93
You save 8%
Sauermann Lock, complete 390 mm Case IH, New Holland, Steyr
€509,47 €421,05 €468,71 €387,37
You save 8%
Airco compressor 12 V, R 134a, pulley Ø 119 mm, PV10, 200 ccm oil
Refrigerant: R 134a | Oil quantity (ccm): 200 | Fixing: DM | No. of grooves: PV10 | Suitable oil: PAG 46 | Nominal voltage (V): 12 | Cylinder capacity... More
Refrigerant: R 134a | Oil quantity (ccm): 200 | Fixing: DM | No. of gr...
€443,40 €366,45 €407,93 €337,13
You save 8%
FEBI Exhaust Gas Temperature Sensor New Holland T7. Onder last schakelbare
FEBI
Exhaust Gas Temperature Sensor New Holland T7. Onder last schakelbare transmiss More
Exhaust Gas Temperature Sensor New Holland T7. Onder last schakelbare ...
€163,35 €135,00 €65,34 €54,00
You save 60%
Cylinder hydraulic steering Case IH, New Holland
€454,49 €375,61 €418,13 €345,56
You save 8%
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Scharmüller
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Colour: Black. Overhang: 155 mm. Description: Height adjustable wit... More
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-val...
€996,85 €823,84 €983,19 €812,56
You save 1%
Connection cable MS with LED light, 2,5 m
Length: 2.5 m. Version: The connection cable with LED light makes it much easier to connect the cable to the vehicle in the dark. The LED lights up wh... More
Length: 2.5 m. Version: The connection cable with LED light makes it m...
€100,09 €82,72 €92,08 €76,10
You save 8%
Radiator 6 rows Case IH, Steyr, New Holland
To fit as: New Holland T7, T7 Autocommand, T7000; Steyr CVT; Case IH Puma, Puma CVX, Puma Multicontroller More
To fit as: New Holland T7, T7 Autocommand, T7000; Steyr CVT; Case IH P...
€2.527,29 €2.088,67 €2.375,11 €1.962,90
You save 6%
Air hose intercooler inner-Ø 65 / 75 mm, length 98 mm
Inner Ø: 65 / 75 mm. Length: 98 mm. More
Inner Ø: 65 / 75 mm. Length: 98 mm.
€70,43 €58,21 €64,80 €53,55
You save 8%
Scharmüller Drawbar ball 50, rail 325 mm, pin Ø 25 mm, 250 kg
Scharmüller
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 160 mm. Plate height: 133 mm. Hole: M20... More
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load cap...
€1.022,10 €844,71 €872,96 €721,45
You save 15%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.070,65 €884,83 €1.013,17 €837,33
You save 5%
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.492,67 €2.060,06 €1.970,56 €1.628,56
You save 21%
FEBI Fuel pressure sensor New Holland T7000 (Tier 3) T7030, T7040, T7050
FEBI
Fuel pressure sensor New Holland T7000 (Tier 3) T7030, T7040, T7050 More
Fuel pressure sensor New Holland T7000 (Tier 3) T7030, T7040, T7050
€130,99 €108,26 €88,25 €72,93
You save 33%
Ball joint taper 24 - 26 mm, length 100 mm, M20 x 1,5, M24 x 1,5
A: 100 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 100 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€59,96 €49,55 €55,16 €45,59
You save 8%
Track rod 446 mm, M32 x 1,5
A: 446 mm. D: M32 x 1,5 mm. E: 46 mm. More
A: 446 mm. D: M32 x 1,5 mm. E: 46 mm.
€484,56 €400,46 €445,80 €368,43
You save 8%
Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm. More
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm.
€225,87 €186,67 €207,80 €171,74
You save 8%
Tank cap thread 45 mm
Version: Thread: 45 mm. More
Version: Thread: 45 mm.
€22,91 €18,94
NOX sensor at catalytic output, 5-pin, 915 mm
To fit: Case IH, New Holland, Steyr. Installation location: At the catalytic converter outlet. Cable length: 915 mm. More
To fit: Case IH, New Holland, Steyr. Installation location: At the cat...
€468,88 €387,50 €431,37 €356,50
You save 8%
Injector Landini, New Holland, Steyr
Engine types: F4HF E613D B006, F4HF P613A H001, F4HF P613B H005. More
Engine types: F4HF E613D B006, F4HF P613A H001, F4HF P613B H005.
€570,55 €471,53 €524,91 €433,81
You save 8%
Cork ring compressoras 20,83 x 31,75 x 8,13 mm Ford, New Holland
Dimensions: Inner Ø 21, Outer Ø 32, Thickness 8 mm. More
Dimensions: Inner Ø 21, Outer Ø 32, Thickness 8 mm.
€2,48 €2,05
Mirror 305 x 215 mm, heated, 12 V, left, rod Ø 16 - 22 mm
Dimensions: 305 x 215 mm. Height: 305 mm. Width: 215 mm. Version: Heated. Operating voltage: 12 V. Installation location: Left. Notes: Electric adjust... More
Dimensions: 305 x 215 mm. Height: 305 mm. Width: 215 mm. Version: Heat...
€200,38 €165,60 €184,35 €152,36
You save 8%
Mirror 145 x 195 mm for trailer hitch
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. Additional information: For trailer hitch. More
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. Additional in...
€45,96 €37,99
Mirror 145 x 195 mm Case IH, New Holland
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. More
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€58,03 €47,96 €53,39 €44,12
You save 8%
Spring right / left fender Case IH, New Holland, Steyr
€45,96 €37,98 €42,28 €34,94
You save 8%
Scharmüller Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Scharmüller
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 147 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€952,66 €787,32 €835,29 €690,32
You save 12%
Showing 97 - 144 of 317

New Holland T7.260 parts: sensors, hitches and cab

On a modern tractor like the New Holland T7.260, one sensor sending a wrong value can put the engine into limp mode. You end up parked at the headland with a full trailer while the rest of the machine is perfectly fine. This page lists more than 300 parts for the T7.260, from small sensors to heavy drawbars. They come from GRANIT and from makers such as Scharmüller, ROCKINGER, Sauermann and Walterscheid.

Sensors and engine monitoring

To keep an eye on engine and driveline there are temperature sensors, a transmission oil temperature sensor, oil pressure switches and NOX sensors for the exhaust aftertreatment. Alternators are here as well, since low system voltage can itself trigger sensor faults.

Before replacing a NOX sensor, read the fault code first and then inspect the plug and wiring. Moisture or corrosion in the connector, or a cable that has been resting on the exhaust, gives the same message as a failed sensor. If the sensor really has gone, fit the new one with a clean, dry connector and clear the stored fault codes afterwards.

At the back of the tractor

For draft work there are drawbars, drawbar frames, adapter plates, Piton Fix couplings, automatic hitches and top drawbars. For trailers with a steered axle there is forced steering. Every time you hitch up, check that the locking pin has dropped fully into the rail before you drive off. A half-locked pin is one of the few hitch faults you will not hear, but you will certainly notice when it goes wrong.

Cab and fuel tank

For the operator there are air suspended tractor seats, and for visibility there are mirrors, including one that also fits Case IH. A lockable tank cap rounds things off.

Choosing the right part for a T7.260

The T7.260 is part of the New Holland T7 series. The type plate shows the exact model and serial number, which is your first check. Sensors usually carry a reference number on the housing or label. For coupling parts, measure the rail width and pin diameter of what is fitted now. If everything matches the product description, the part will fit.

If you run more than one T7, each model has its own page:

The T7.190 and T7.315 are in this series too. Every other model is under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart