Menu
EUR

New Holland T7.260 tractor parts & technical data

Working on a New Holland T7.260? This page brings together more than 300 parts that fit, including trailer couplings, electrics, steering and front axle parts.

313 parts found for New Holland T7.260
Show:
GRANIT Feed pump Landini Powermaster, Powermax, series 6, series 7
€461,03 €381,02 €437,95 €361,94
You save 5%
AdBlue supply unit Case IH, Steyr, New Holland
Description: AdBlue supply units ensure even metering of AdBlue depending on the load on the common rail engine. It is important that only filtered ur... More
Description: AdBlue supply units ensure even metering of AdBlue depend...
€1.555,95 €1.285,91 €1.478,15 €1.221,61
You save 5%
GRANIT Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
€14,30 €11,82
GRANIT High-pressure pump diesel Case IH, Steyr, New Holland
€1.054,01 €871,08 €1.001,30 €827,52
You save 5%
GRANIT Idler pulley outer-Ø 74 mm, width 47 mm Case IH, Steyr, New Holland
GRANIT
Outer Ø: 74 mm. Width: 47 mm. More
Outer Ø: 74 mm. Width: 47 mm.
€109,71 €90,67 €104,20 €86,12
You save 5%
GRANIT Spring right / left fender Case IH, New Holland, Steyr
€44,04 €36,40 €41,80 €34,55
You save 5%
Scharmüller Drawbar K80 manual, rail 325 mm, pin Ø 25 mm, 2000 kg, black
Scharmüller
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000 kg. D-value: 83,9 kN. Plate height: 133 mm. Colour: Black. Overhang:... More
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load cap...
€1.364,41 €1.127,61 €1.149,20 €949,75
You save 16%
Scharmüller Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
Scharmüller
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 180 mm. Plate height: 133 mm. Hole: M20... More
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load cap...
€1.076,56 €889,72 €952,10 €786,86
You save 12%
Mirror holder left Case IH, Steyr, New Holland
€132,74 €109,70 €126,10 €104,21
You save 5%
GRANIT Cylinder New Holland, Steyr
€602,98 €498,33 €572,80 €473,39
You save 5%
GRANIT Sensor laadluchttemperatuur
GRANIT
Version: For charge air temperature. More
Version: For charge air temperature.
€61,59 €50,90 €58,50 €48,35
You save 5%
GRANIT Push button switch PTO shaft with connection cable and plug
GRANIT
Version: Front PTO operation, Connection cable with plug. More
Version: Front PTO operation, Connection cable with plug.
€194,61 €160,83 €176,00 €145,45
You save 10%
GRANIT Preheating relay 12 volt with plug connection
GRANIT
Version: 12 V, with plug connection. More
Version: 12 V, with plug connection.
€171,65 €141,86 €155,30 €128,35
You save 10%
Step tread 365 mm Case IH, Steyr, New Holland
Tractor types: Case IH Puma 115, 125, 130, 130 CVX, 140, 145, 145 CVX, 155, 160, 160 CVX More
Tractor types: Case IH Puma 115, 125, 130, 130 CVX, 140, 145, 145 CVX,...
€64,08 €52,96 €60,85 €50,29
You save 5%
Sauermann Drawbar 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN, drawbar eye Ø 40 mm
Sauermann
Ø 40 mm drawbar eye, Ø 38 mm pin More
Ø 40 mm drawbar eye, Ø 38 mm pin
€840,95 €695,00 €798,90 €660,25
You save 5%
Scharmüller Adapter plate 255 mm rail, guide 32 mm, hole pattern 140 x 80 mm
Scharmüller
Colour: Verkehrs Grau | Detent pin Ø (mm): 25 | Pin Ø (mm): 16 | Guide width (mm): 32 | Hole pattern (mm): 140 x 80 | Rail width (mm): 255 | Plate h... More
Colour: Verkehrs Grau | Detent pin Ø (mm): 25 | Pin Ø (mm): 16 | Gui...
€536,25 €443,18
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Scharmüller
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø (mm): 25 | Colour: Black | Load capacity (kg): 2000 | Plate height (... More
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | De...
€1.052,10 €869,50
Scharmüller Hitch automatic 82,4 kN, rail 311 mm, locking pin Ø 22 mm
Scharmüller
Plate height (mm): 120 | Detent pin Ø (mm): 22 | D-value (kN): 82,4 | Rail width (mm): 311 | Load capacity (kg): 2000 | Load capacity (t): 2 | Guide ... More
Plate height (mm): 120 | Detent pin Ø (mm): 22 | D-value (kN): 82,4 |...
€1.128,50 €932,64
Scharmüller Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
Scharmüller
Description: Can be disconnected with pin | Colour: Black | Rail width (mm): 330 | Overhang (mm): 67 | Plate height (mm): 160 | D-value (kN): 89,3 | G... More
Description: Can be disconnected with pin | Colour: Black | Rail width...
€758,99 €627,26 €639,25 €528,31
You save 16%
Connector head M16 x 1,5 yellow, brake line, vehicle
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no.: 55929 More
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no....
€22,55 €18,64
CARLISLE External plate 1,5 mm, inner 99 mm, outer 152 mm
CARLISLE
Version: Thickness: 1.5 mm Inner: 99 mm Outer: 152 mm More
Version: Thickness: 1.5 mm Inner: 99 mm Outer: 152 mm
€33,81 €27,94 €32,10 €26,53
You save 5%
CARLISLE External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
CARLISLE
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm More
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm
€10,32 €8,53 €9,80 €8,10
You save 5%
Showing 121 - 144 of 313

New Holland T7.260 parts: sensors, hitches and cab

On a modern tractor like the New Holland T7.260, one sensor sending a wrong value can put the engine into limp mode. You end up parked at the headland with a full trailer while the rest of the machine is perfectly fine. This page lists more than 300 parts for the T7.260, from small sensors to heavy drawbars. They come from GRANIT and from makers such as Scharmüller, ROCKINGER, Sauermann and Walterscheid.

Sensors and engine monitoring

To keep an eye on engine and driveline there are temperature sensors, a transmission oil temperature sensor, oil pressure switches and NOX sensors for the exhaust aftertreatment. Alternators are here as well, since low system voltage can itself trigger sensor faults.

Before replacing a NOX sensor, read the fault code first and then inspect the plug and wiring. Moisture or corrosion in the connector, or a cable that has been resting on the exhaust, gives the same message as a failed sensor. If the sensor really has gone, fit the new one with a clean, dry connector and clear the stored fault codes afterwards.

At the back of the tractor

For draft work there are drawbars, drawbar frames, adapter plates, Piton Fix couplings, automatic hitches and top drawbars. For trailers with a steered axle there is forced steering. Every time you hitch up, check that the locking pin has dropped fully into the rail before you drive off. A half-locked pin is one of the few hitch faults you will not hear, but you will certainly notice when it goes wrong.

Cab and fuel tank

For the operator there are air suspended tractor seats, and for visibility there are mirrors, including one that also fits Case IH. A lockable tank cap rounds things off.

Choosing the right part for a T7.260

The T7.260 is part of the New Holland T7 series. The type plate shows the exact model and serial number, which is your first check. Sensors usually carry a reference number on the housing or label. For coupling parts, measure the rail width and pin diameter of what is fitted now. If everything matches the product description, the part will fit.

If you run more than one T7, each model has its own page:

The T7.190 and T7.315 are in this series too. Every other model is under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart