Menu
EUR

New Holland T7.260 tractor parts & technical data

Working on a New Holland T7.260? This page brings together more than 300 parts that fit, including trailer couplings, electrics, steering and front axle parts.

313 parts found for New Holland T7.260
Show:
GRANIT Feed pump Landini Powermaster, Powermax, series 6, series 7
5%
GRANIT
Feed pump Landini Powermaster, Powermax, series 6, series 7
€461,03 €381,02 €437,95 €361,94
 
AdBlue supply unit Case IH, Steyr, New Holland
5%
AdBlue supply unit Case IH, Steyr, New Holland
Description: AdBlue supply units ensure even metering of AdBlue depending on the...
€1.555,95 €1.285,91 €1.478,15 €1.221,61
 
Heating flange Case IH, New Holland
Heating flange Case IH, New Holland
€253,35 €209,38
 
GRANIT Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
GRANIT
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
Thread: M22 x 1.5.
€14,30 €11,82
 
GRANIT High-pressure pump diesel Case IH, Steyr, New Holland
5%
GRANIT
High-pressure pump diesel Case IH, Steyr, New Holland
Fuel: Diesel.
€1.054,01 €871,08 €1.001,30 €827,52
 
GRANIT Idler pulley outer-Ø 74 mm, width 47 mm Case IH, Steyr, New Holland
5%
GRANIT
Idler pulley outer-Ø 74 mm, width 47 mm Case IH, Steyr, New Holland
Outer Ø: 74 mm. Width: 47 mm.
€109,71 €90,67 €104,20 €86,12
 
GRANIT Spring right / left fender Case IH, New Holland, Steyr
5%
GRANIT
Spring right / left fender Case IH, New Holland, Steyr
€44,04 €36,40 €41,80 €34,55
 
Scharmüller Drawbar K80 manual, rail 325 mm, pin Ø 25 mm, 2000 kg, black
16%
Scharmüller
Drawbar K80 manual, rail 325 mm, pin Ø 25 mm, 2000 kg, black
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000...
€1.364,41 €1.127,61 €1.149,20 €949,75
 
Scharmüller Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
12%
Scharmüller
Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 250 ...
€1.076,56 €889,72 €952,10 €786,86
 
Mirror holder left Case IH, Steyr, New Holland
5%
Mirror holder left Case IH, Steyr, New Holland
€132,74 €109,70 €126,10 €104,21
 
GRANIT Cylinder New Holland, Steyr
5%
GRANIT
Cylinder New Holland, Steyr
€602,98 €498,33 €572,80 €473,39
 
GRANIT Sensor laadluchttemperatuur
5%
GRANIT
Sensor laadluchttemperatuur
Version: For charge air temperature.
€61,59 €50,90 €58,50 €48,35
 
GRANIT Push button switch PTO shaft with connection cable and plug
10%
GRANIT
Push button switch PTO shaft with connection cable and plug
Version: Front PTO operation, Connection cable with plug.
€194,61 €160,83 €176,00 €145,45
 
GRANIT Preheating relay 12 volt with plug connection
10%
GRANIT
Preheating relay 12 volt with plug connection
Version: 12 V, with plug connection.
€171,65 €141,86 €155,30 €128,35
 
Step tread 365 mm Case IH, Steyr, New Holland
5%
Step tread 365 mm Case IH, Steyr, New Holland
Tractor types: Case IH Puma 115, 125, 130, 130 CVX, 140, 145, 145 CVX, 155, 160,...
€64,08 €52,96 €60,85 €50,29
 
Sauermann Drawbar 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN, drawbar eye Ø 40 mm
5%
Sauermann
Drawbar 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN, drawbar eye Ø 40 mm
Ø 40 mm drawbar eye, Ø 38 mm pin
€840,95 €695,00 €798,90 €660,25
 
Scharmüller Adapter plate 255 mm rail, guide 32 mm, hole pattern 140 x 80 mm
Scharmüller
Adapter plate 255 mm rail, guide 32 mm, hole pattern 140 x 80 mm
Colour: Verkehrs Grau | Detent pin Ø (mm): 25 | Pin Ø (mm): 16 | Guide width (mm...
€536,25 €443,18
 
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Scharmüller
Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø...
€1.052,10 €869,50
 
Scharmüller Hitch automatic 82,4 kN, rail 311 mm, locking pin Ø 22 mm
Scharmüller
Hitch automatic 82,4 kN, rail 311 mm, locking pin Ø 22 mm
Plate height (mm): 120 | Detent pin Ø (mm): 22 | D-value (kN): 82,4 | Rail width...
€1.128,50 €932,64
 
Scharmüller Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
16%
Scharmüller
Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
Description: Can be disconnected with pin | Colour: Black | Rail width (mm): 330...
€758,99 €627,26 €639,25 €528,31
 
Connector head M16 x 1,5 yellow, brake line, vehicle
Connector head M16 x 1,5 yellow, brake line, vehicle
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no.: 55929
€22,55 €18,64
 
CARLISLE External plate 1,5 mm, inner 99 mm, outer 152 mm
5%
CARLISLE
External plate 1,5 mm, inner 99 mm, outer 152 mm
Version: Thickness: 1.5 mm Inner: 99 mm Outer: 152 mm
€33,81 €27,94 €32,10 €26,53
 
CARLISLE External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
5%
CARLISLE
External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm
€10,32 €8,53 €9,80 €8,10
 
Showing 121 - 144 of 313

New Holland T7.260 parts: sensors, hitches and cab

On a modern tractor like the New Holland T7.260, one sensor sending a wrong value can put the engine into limp mode. You end up parked at the headland with a full trailer while the rest of the machine is perfectly fine. This page lists more than 300 parts for the T7.260, from small sensors to heavy drawbars. They come from GRANIT and from makers such as Scharmüller, ROCKINGER, Sauermann and Walterscheid.

Sensors and engine monitoring

To keep an eye on engine and driveline there are temperature sensors, a transmission oil temperature sensor, oil pressure switches and NOX sensors for the exhaust aftertreatment. Alternators are here as well, since low system voltage can itself trigger sensor faults.

Before replacing a NOX sensor, read the fault code first and then inspect the plug and wiring. Moisture or corrosion in the connector, or a cable that has been resting on the exhaust, gives the same message as a failed sensor. If the sensor really has gone, fit the new one with a clean, dry connector and clear the stored fault codes afterwards.

At the back of the tractor

For draft work there are drawbars, drawbar frames, adapter plates, Piton Fix couplings, automatic hitches and top drawbars. For trailers with a steered axle there is forced steering. Every time you hitch up, check that the locking pin has dropped fully into the rail before you drive off. A half-locked pin is one of the few hitch faults you will not hear, but you will certainly notice when it goes wrong.

Cab and fuel tank

For the operator there are air suspended tractor seats, and for visibility there are mirrors, including one that also fits Case IH. A lockable tank cap rounds things off.

Choosing the right part for a T7.260

The T7.260 is part of the New Holland T7 series. The type plate shows the exact model and serial number, which is your first check. Sensors usually carry a reference number on the housing or label. For coupling parts, measure the rail width and pin diameter of what is fitted now. If everything matches the product description, the part will fit.

If you run more than one T7, each model has its own page:

The T7.190 and T7.315 are in this series too. Every other model is under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart