Menu
EUR

New Holland T7.290 tractor parts & technical data

Engine parts, electrics and trailer couplings for the New Holland T7.290 share one page here. In total there are more than 110 parts for this T7 series model.

112 parts found for New Holland T7.290
Show:
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.133,29 €936,60 €867,75 €717,15
You save 23%
Scharmüller Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
Scharmüller
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 180 mm. Plate height: 133 mm. Hole: M20... More
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load cap...
€1.076,56 €889,72 €952,10 €786,86
You save 12%
ROCKINGER Clutch carrier 390 mm, 2000 kg, black
ROCKINGER
Colour: Black. Load capacity: 2000 kg. More
Colour: Black. Load capacity: 2000 kg.
€754,00 €623,14
ROCKINGER Top drawbar rail 390 mm, pin Ø 25 mm, coupling pin 36 mm
ROCKINGER
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 36 mm. Load capacity: 2000 kg. D-value: 98,1 kN. Colour: Black. Drawbar ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.858,56 €1.536,00 €1.494,25 €1.234,92
You save 20%
Scharmüller Drawbar automatic, rail 330 mm, pin Ø 25 mm, 2500 kg, AGCO gray
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 89,3 kN. Colour: AGCO grey. Desc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.396,49 €1.154,12 €1.235,00 €1.020,66
You save 12%
ROCKINGER Drawbar automatic 48,7 mm, 390 / 25 / 32 mm, 2000 kg, 93,6 kN
€2.966,09 €2.451,31 €2.384,70 €1.970,83
You save 20%
Scharmüller Hitch automatic 82,4 kN, rail 311 mm, locking pin Ø 22 mm
Scharmüller
Description: Height adjustable with handle | Load capacity (t): 2 | Detent pin Ø (mm): 22 | D-value (kN): 82,4 | Plate height (mm): 120 | Guide width... More
Description: Height adjustable with handle | Load capacity (t): 2 | De...
€1.128,50 €932,64
GRANIT Cylinder hydraulic steering Case IH, Steyr, New Holland
€944,33 €780,44 €897,10 €741,41
You save 5%
GRANIT Ring gear Ø 384/410 mm, 127 teeth Case IH, New Holland
GRANIT
Version: Ø 384/410 mm, 127 teeth. More
Version: Ø 384/410 mm, 127 teeth.
€272,49 €225,20 €258,85 €213,93
You save 5%
Scharmüller Adapter plate rail width 311 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 311 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 175 mm. Thread: M20. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 311 mm. Hole pat...
€702,01 €580,17 €620,85 €513,10
You save 12%
Scharmüller Adapter plate rail width 325 mm, hole pattern 140 x 80 mm, M16
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pattern: 140 x 80 mm. Guide width: 26 mm. Plate height: 133 mm. Thread: M16. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pat...
€531,07 €438,90 €469,65 €388,14
You save 12%
GRANIT Pressure pipe Tector 6 / 7 Case IH, Steyr, New Holland
GRANIT
Installation location: Tector 6 / 7. More
Installation location: Tector 6 / 7.
€52,65 €43,51 €50,00 €41,32
You save 5%
Lift arm right 490 - 610 mm, Ø-upper 16 mm, Ø-lower 19 mm
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis inside = 25 mm. Installation location: rechts. More
Dimensions: Length = 490 - 610, Ø top = 16, Ø bottom = 19, Clevis in...
€477,82 €394,89 €453,90 €375,12
You save 5%
Scharmüller Drawbar K80 manual, rail 325 mm, pin Ø 25 mm, 2000 kg, black
Scharmüller
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000 kg. D-value: 83,9 kN. Plate height: 133 mm. Colour: Black. Overhang:... More
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load cap...
€1.364,41 €1.127,61 €1.149,20 €949,75
You save 16%
Scharmüller Hitch automatic 82,4 kN, rail 311 mm, locking pin Ø 22 mm
Scharmüller
Plate height (mm): 120 | Detent pin Ø (mm): 22 | D-value (kN): 82,4 | Rail width (mm): 311 | Load capacity (kg): 2000 | Load capacity (t): 2 | Guide ... More
Plate height (mm): 120 | Detent pin Ø (mm): 22 | D-value (kN): 82,4 |...
€1.128,50 €932,64
Kentekenlamp LED 12/24 V Case IH, New Holland, Steyr
Voltage (V): 12/24 | Test mark: ECE R10 | Bulb: LED | IP6K9K ADR ECE SAE | Bulbs included: Yes More
Voltage (V): 12/24 | Test mark: ECE R10 | Bulb: LED | IP6K9K ADR ECE S...
€50,92 €42,08 €48,35 €39,96
You save 5%
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M16 x 1,5, standard closed
Wabco
Eligible: Environmental protection and safety (formerly de minimis) More
Eligible: Environmental protection and safety (formerly de minimis)
€413,58 €341,80 €392,90 €324,71
You save 5%
Scharmüller Forced steering 250 mm, K50, right, 2 ton, black, 11,23 kg
Scharmüller
Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Colour: Black | Lock: K50 | Assemb... More
Description: Approved for steering forces up to 20 kN (2 t) | Connecti...
€612,85 €506,49
MAHLE Starter motor with reduction 12 V, 4,2 kW, 10 teeth, clockwise
€545,84 €451,11 €511,70 €422,89
You save 6%
Scharmüller Adapter plate height adjustable 330 mm, 140 x 80 mm, M20, 2000 kg
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 330 mm. Hole pattern: 140 x 80 mm. Guide width: 32 mm. Plate height: 175 mm. Thread: M20. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 330 mm. Hole pat...
€536,25 €443,18
GRANIT NOX sensor exhaust input 415 mm Case IH, Steyr, New Holland
GRANIT
Description: Exhaust / input. More
Description: Exhaust / input.
€762,20 €629,92 €724,00 €598,35
You save 5%
Signal transmitter exhaust aftertreatment Optum 250-300 Tier 4B
€724,98 €599,16 €688,70 €569,17
You save 5%
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Ø: 98.59 x 88.27 x 5.16 mm. More
Ø: 98.59 x 88.27 x 5.16 mm.
€4,24 €3,50
GRANIT Ammonia sensor exhaust gas NH3, 8-pin, 1.000 mm
GRANIT
Description: Model year 07/17 ->. More
Description: Model year 07/17 ->.
€824,16 €681,12 €782,95 €647,07
You save 5%
Showing 49 - 72 of 112

New Holland T7.290 parts for exhaust aftertreatment, engine and hitch

When a warning light comes on in a New Holland T7.290, the exhaust aftertreatment is a frequent suspect. A NOX sensor at the catalytic converter outlet or a temperature sensor sending implausible readings can push the engine into limp mode. That is why this page starts with the engine and moves to the hitch afterwards. You will find more than 110 parts for the T7.290 here, from Scharmüller, GRANIT, ROCKINGER, Walterscheid and FEBI.

Sensors, seals and bolts

Alongside NOX sensors and temperature sensors there are crankshaft seals and cylinder head bolts. A weeping seal at the front of the crankshaft throws oil onto the belt drive and shortens belt life. On many engines the head bolts are stretch bolts, so never reuse them and tighten them in the sequence and to the angle given in the workshop manual.

Route the cable of a new NOX sensor exactly as the old one ran and use the existing clips. A cable resting against the hot exhaust or rubbing as the tractor steers will bring the same fault code back within weeks.

Drawbar, Piton Fix and hydraulics

At the back of the T7.290 it is all about coupling up. There are automatic drawbars, automatic hitches, top drawbars and complete drawbar frames, plus Piton Fix and adapter plates. For steered trailers there are forced steering parts, and for the PTO there are clutch carriers and balls from Walterscheid. A hydraulic cylinder and a fender frame complete the picture.

Making sure it fits

The T7.290 is one of the larger types in the T7 series. Related models look alike from the outside, so the type plate is the first thing to check. If the old part is already off, look for a stamped or printed number and compare it with the parts on this page. With sensors the connector matters too, as a plug with a different pin count simply will not mate.

If there are more T7 tractors on the farm, each type has a page of its own:

The T7.260 and the T7.190 are part of the same series as well. For every New Holland model in one overview, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart