Menu
EUR

New Holland T7.315 tractor parts & technical data

More than 110 items suit the New Holland T7.315 from the T7 Series. Among them are trailer couplings, electrics and engine parts for this tractor.

112 parts found for New Holland T7.315
Show:
Scharmüller Drawbar inner part 311 mm, coupling pin 38 mm, 2500 kg
8%
Scharmüller
Drawbar inner part 311 mm, coupling pin 38 mm, 2500 kg
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.211,09 €1.000,90 €1.114,20 €920,83
 
Scharmüller Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
8%
Scharmüller
Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 250 ...
€1.123,39 €928,42 €1.033,52 €854,15
 
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
21%
Walterscheid
Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800...
€1.150,89 €951,15 €909,90 €751,99
 
AdBlue injection unit DM 2.5, 7,2 kg/hr
8%
AdBlue injection unit DM 2.5, 7,2 kg/hr
Description: DM 2.5, 7.2 kg/hr.
€397,84 €328,79 €366,01 €302,49
 
Metering unit with 3 fixing points Case IH, New Holland, Landini
8%
Metering unit with 3 fixing points Case IH, New Holland, Landini
€171,50 €141,74 €157,78 €130,40
 
Pressure pipe Tector 6 / 7 Case IH, Steyr, New Holland
8%
Pressure pipe Tector 6 / 7 Case IH, Steyr, New Holland
Installation location: Tector 6 / 7.
€54,94 €45,41 €50,54 €41,77
 
Crankshaft seal rear Case IH, Steyr, New Holland
8%
Crankshaft seal rear Case IH, Steyr, New Holland
€96,82 €80,02 €89,07 €73,62
 
Frame fender R950 dark gray
8%
Frame fender R950 dark gray
Reference no.: 47814947.
€138,01 €114,06 €126,97 €104,93
 
ROCKINGER Piton Fix rail width 390 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
23%
ROCKINGER
Piton Fix rail width 390 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.469,71 €1.214,64 €1.132,39 €935,86
 
ROCKINGER Top drawbar rail 390 mm, pin Ø 25 mm, coupling pin 36 mm
20%
ROCKINGER
Top drawbar rail 390 mm, pin Ø 25 mm, coupling pin 36 mm
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 36 ...
€1.939,41 €1.602,82 €1.544,28 €1.276,26
 
Cylinder head bolt M12 x 150 mm Case IH, Steyr, New Holland
Cylinder head bolt M12 x 150 mm Case IH, Steyr, New Holland
Dimensions: M12 x 150 mm.
€5,76 €4,76
 
Tank cap New Holland CR 7.90 - CR 10.90, CX 5.80 - CX 8.90
8%
Tank cap New Holland CR 7.90 - CR 10.90, CX 5.80 - CX 8.90
€49,71 €41,08 €45,73 €37,80
 
Borg Warner Cooling fan Ø 660 mm Case IH, New Holland, Steyr
4%
Borg Warner
Cooling fan Ø 660 mm Case IH, New Holland, Steyr
Ø: 660 mm.
€62,50 €51,65 €59,74 €49,37
 
Scharmüller Drawbar frame 2000 kg, aanhangerlast 24000 kg, Unimog U1300
6%
Scharmüller
Drawbar frame 2000 kg, aanhangerlast 24000 kg, Unimog U1300
suitable for: Mercedes Benz. Series: Unimog Typ 425. Category: Bearing supports....
€2.609,18 €2.156,35 €2.450,45 €2.025,17
 
Temperature sensor straight 50 mm
8%
Temperature sensor straight 50 mm
€108,01 €89,26 €99,37 €82,12
 
Showing 97 - 112 of 112

New Holland T7.315 parts for the hitch, exhaust sensors and engine

The T7.315 is a tractor that spends its days in front of heavy trailers, and the parts list reflects that. Of the more than 110 New Holland T7.315 parts on this page, a large share sits at the back: drawbars, Piton Fix hitches, automatic hitches, top drawbars, adapter plates and drawbar frames. Scharmüller, ROCKINGER and Walterscheid supply the coupling systems, while GRANIT and FEBI cover engine and hydraulic parts.

Rail width and pin size come first

When you replace a drawbar, an automatic hitch or a Piton Fix, the tractor model is only half the story. These parts slide into a rail on the back of the tractor, and the rail width has to match. The locking pin diameter also varies between versions. Measure the existing rail and the old pin, then compare with the item description. An adapter plate with the right bolt pattern lets you hang a different coupling system in the same rail. If you run a steered trailer, there are forced steering parts here too.

Engine and exhaust aftertreatment

For the engine and exhaust there are NOX sensors, exhaust temperature sensors, crankshaft seals and cylinder head bolts. You will also find hydraulic cylinders, a clutch carrier, a ball and fender frames.

A word on cylinder head bolts. Never reuse them. They are tightened into their stretch range on purpose and will not hold the same clamping force after being undone. Whenever the head comes off, fit a complete new set, clean the threads in the block, and tighten in the specified sequence and in stages, finishing with the final angle.

With NOX sensors, position matters. There is one before and one after the catalytic converter, and they are not simply swapped for each other. Note where the old sensor sat and how long its cable is before ordering.

Confirming the model and other T7 tractors

Check the rating plate before you order. The T7 series covers a lot of models, and each has its own set of parts. A reference number on the old part is the quickest way to compare. The other models in the series each have a dedicated page:

The T7.190 and T7.260 are part of the same series. For everything else from the brand, see New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart