Menu
EUR

New Holland T7.315 tractor parts & technical data

More than 110 items suit the New Holland T7.315 from the T7 Series. Among them are trailer couplings, electrics and engine parts for this tractor.

112 parts found for New Holland T7.315
Show:
Arm, dark gray New Holland, Case IH, Steyr
5%
Arm, dark gray New Holland, Case IH, Steyr
Reference no.: 47945918.
€111,39 €92,06 €105,80 €87,44
 
NOX sensor 915 mm Case IH, New Holland, Steyr
NOX sensor 915 mm Case IH, New Holland, Steyr
Description: Exhaust / output.
€442,45 €365,66
 
Temperature sensor curved SCR catalytic converter New Holland, Steyr, Case IH
5%
Temperature sensor curved SCR catalytic converter New Holland, Steyr, Case IH
Description: SCR catalytic converter.
€97,41 €80,50 €92,50 €76,45
 
AdBlue injection unit DM 2.5, 7,2 kg/hr
5%
AdBlue injection unit DM 2.5, 7,2 kg/hr
Description: DM 2.5, 7.2 kg/hr.
€381,26 €315,09 €362,15 €299,30
 
Temperature sensor -40 up to 850 °C, curved, 50 mm, with resistor
5%
Temperature sensor -40 up to 850 °C, curved, 50 mm, with resistor
Description: Oxidation catalyst. Version: -40 to 850°C.
€112,81 €93,23 €107,15 €88,55
 
GRANIT Seal Case IH, Steyr
GRANIT
Seal Case IH, Steyr
€20,60 €17,02
 
GRANIT Cylinder head bolt M12 x 130 mm Case IH, Steyr, New Holland
GRANIT
Cylinder head bolt M12 x 130 mm Case IH, Steyr, New Holland
Dimensions: M12 x 130 mm.
€4,54 €3,75
 
Crankshaft seal for Case IH, Steyr, New Holland
5%
Crankshaft seal for Case IH, Steyr, New Holland
€34,58 €28,58 €32,85 €27,15
 
Frame fender R950-300 CCM HD
5%
Frame fender R950-300 CCM HD
Reference no.: 47741331.
€205,82 €170,10 €195,50 €161,57
 
GRANIT Frame fender R950 dark gray
5%
GRANIT
Frame fender R950 dark gray
Reference no.: 47814947.
€132,25 €109,30 €125,60 €103,80
 
GRANIT Frame fender R850-245 CCM HD
5%
GRANIT
Frame fender R850-245 CCM HD
Reference no.: 47741332.
€226,27 €187,00 €214,95 €177,64
 
Rear-view mirror 487 x 228 x 130 mm, heated, 12 V, right
10%
Rear-view mirror 487 x 228 x 130 mm, heated, 12 V, right
Dimensions: 487 x 228 x 130 mm. Height: 130 mm. Width: 228 mm. Length: 487 mm. R...
€299,46 €247,49 €270,90 €223,88
 
GRANIT Temperature sensor straight 50 mm Case IH, New Holland, Steyr
5%
GRANIT
Temperature sensor straight 50 mm Case IH, New Holland, Steyr
Description: SCR/oxidation catalytic converter.
€103,50 €85,54 €98,30 €81,24
 
Showing 97 - 112 of 112

New Holland T7.315 parts for the hitch, exhaust sensors and engine

The T7.315 is a tractor that spends its days in front of heavy trailers, and the parts list reflects that. Of the more than 110 New Holland T7.315 parts on this page, a large share sits at the back: drawbars, Piton Fix hitches, automatic hitches, top drawbars, adapter plates and drawbar frames. Scharmüller, ROCKINGER and Walterscheid supply the coupling systems, while GRANIT and FEBI cover engine and hydraulic parts.

Rail width and pin size come first

When you replace a drawbar, an automatic hitch or a Piton Fix, the tractor model is only half the story. These parts slide into a rail on the back of the tractor, and the rail width has to match. The locking pin diameter also varies between versions. Measure the existing rail and the old pin, then compare with the item description. An adapter plate with the right bolt pattern lets you hang a different coupling system in the same rail. If you run a steered trailer, there are forced steering parts here too.

Engine and exhaust aftertreatment

For the engine and exhaust there are NOX sensors, exhaust temperature sensors, crankshaft seals and cylinder head bolts. You will also find hydraulic cylinders, a clutch carrier, a ball and fender frames.

A word on cylinder head bolts. Never reuse them. They are tightened into their stretch range on purpose and will not hold the same clamping force after being undone. Whenever the head comes off, fit a complete new set, clean the threads in the block, and tighten in the specified sequence and in stages, finishing with the final angle.

With NOX sensors, position matters. There is one before and one after the catalytic converter, and they are not simply swapped for each other. Note where the old sensor sat and how long its cable is before ordering.

Confirming the model and other T7 tractors

Check the rating plate before you order. The T7 series covers a lot of models, and each has its own set of parts. A reference number on the old part is the quickest way to compare. The other models in the series each have a dedicated page:

The T7.190 and T7.260 are part of the same series. For everything else from the brand, see New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart