Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

New Holland TD5010 tractor parts & technical data

This page lists more than 180 parts for the New Holland TD5010 from the TD5000 series. It covers trailer couplings, brake and transmission parts and lighting.

186 parts found for New Holland TD5010
Show:
ROCKINGER Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
€2.805,57 €2.318,65 €2.211,65 €1.827,81
You save 21%
Double clutch DuT 280 organic, 35 x 40, 327 mm
Dimensions (mm): 35 x 40 14 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 35 x 40 14 grooves | Material specifications: Organic...
€960,87 €794,11 €884,00 €730,58
You save 8%
LUK Clutch kit double plate connection without release bearing, 30,50 kg
LUK
Contents: Pressure plate 458228007714, clutch plate 458328018616 | Supplementary set: Without release bearing | Connection: For vehicles with double-d... More
Contents: Pressure plate 458228007714, clutch plate 458328018616 | Sup...
€758,84 €627,14 €698,13 €576,97
You save 8%
LUK Thrust bearing 50 x 90 x 21,6 mm
LUK
Dimensions (mm): 50 x 90 x 21.6 More
Dimensions (mm): 50 x 90 x 21.6
€88,70 €73,31 €81,60 €67,44
You save 8%
MAHLE Alternator 14 V, 120 A, fastening 82 / 10,2 / 86 mm, pulley-Ø 55 mm
MAHLE
Installation angle (°): r 60 | Nominal voltage (V): 14 | Nominal values (V / A): 14 / 120 | Direction of rotation: ↻ | Charging current (A): 120 | ... More
Installation angle (°): r 60 | Nominal voltage (V): 14 | Nominal valu...
€540,62 €446,79 €323,80 €267,60
You save 40%
FEBI Powerband multi-rib belt 8 ribs Case IH, Steyr, New Holland
FEBI
To fit as: New Holland More
To fit as: New Holland
€32,86 €27,16 €12,02 €9,93
You save 63%
As transmission New Holland TD 4020F-5030, 60D-95D
€224,24 €185,32 €206,30 €170,50
You save 8%
Half shaft right rear axle New Holland TD55-TD95, TD5010-TD5050
€645,52 €533,49 €593,88 €490,81
You save 8%
Shift ring transmission Fiat, New Holland
€112,41 €92,90 €103,42 €85,47
You save 8%
Main shaft transmission Fiat, New Holland
€296,68 €245,19 €272,95 €225,57
You save 8%
Intermediate gear reversing clutch 28/38 teeth New Holland, Fiat
€312,27 €258,07 €287,29 €237,43
You save 8%
As driven as Fiat, New Holland
€361,37 €298,65 €332,46 €274,76
You save 8%
Gas strut steering 420 N, 252 mm, stroke 46 mm
suitable for: Lenkung. Newtons: 420. A: 252 mm. d1: 10 mm. d2: 28 mm. Stroke: 46 mm. To fit: Steering. Reference no.: 87732038. More
suitable for: Lenkung. Newtons: 420. A: 252 mm. d1: 10 mm. d2: 28 mm. ...
€44,05 €36,41 €40,53 €33,49
You save 8%
Gear wheel reduction 50 teeth Case IH, Fiat, New Holland
€479,13 €395,98 €440,80 €364,30
You save 8%
Tank sender signal transmitter Case IH JX 60-95, New Holland TD5010-5050
Version: Signal transmitter More
Version: Signal transmitter
€293,54 €242,60 €270,06 €223,19
You save 8%
Eaton Gear wheel transmission Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5131169 More
Reference no.: 5131169
€264,65 €218,72 €243,48 €201,22
You save 8%
Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, 190 ccm oil
No. of grooves: 4 | Oil quantity (ccm): 190 | Suitable oil: PAG 46 | Nominal voltage (V): 12 | Pulley Ø (mm): 112 | Refrigerant: R 134a | Fixing: DM More
No. of grooves: 4 | Oil quantity (ccm): 190 | Suitable oil: PAG 46 | N...
€495,77 €409,73 €456,11 €376,95
You save 8%
LUK Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
LUK
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Sintere...
€162,99 €134,70 €149,95 €123,93
You save 8%
LUK Clutch plate 280UKF 22 x 25 mm, 10 splines
LUK
Dimensions (mm): 22 x 25 10 grooves More
Dimensions (mm): 22 x 25 10 grooves
€139,38 €115,19 €128,23 €105,97
You save 8%
Clutch plate 280 sintered, 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Sinter...
€130,06 €107,49 €119,66 €98,89
You save 8%
Thrust bearing single PTO clutch 70 x 110 x 20 mm
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€36,11 €29,84 €33,22 €27,46
You save 8%
Eaton Gear wheel transmission 1,72 kg Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125005 More
Reference no.: 5125005
€189,02 €156,21 €173,90 €143,72
You save 8%
Eaton As transmission Case IH, Fiat, Ford, New Holland, 3,10 kg
Eaton
Reference no.: 47132984 More
Reference no.: 47132984
€201,84 €166,81
FEBI Transmission-oil filter W14005
€144,29 €119,25 €43,19 €35,69
You save 70%
Expander Expander repair bolt 53 mm, Ø 20 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 53 mm. B: 30 mm. C: 12 mm. Ø D: 20 mm. Ø E: 20 mm. Ø F: 20 mm. G: 12 m... More
Type: With threaded pin at both ends, hexagon nut, with lubrication ho...
€258,61 €213,73
Gear wheel manually shifted transmission 20 teeth Fiat, New Holland
€75,96 €62,78 €69,88 €57,75
You save 8%
Gear wheel reduction New Holland
€228,04 €188,46 €209,80 €173,39
You save 8%
Planetary gear transmission 22 / 12 teeth Fiat, New Holland
Number of teeth: 22/12. More
Number of teeth: 22/12.
€101,71 €84,06 €93,57 €77,33
You save 8%
Bevel gear differential drive 13 teeth Fiat, New Holland
€33,61 €27,78 €30,92 €25,55
You save 8%
Gear wheel transmission New Holland TD55D-TD5050
€1.008,29 €833,30 €927,63 €766,63
You save 8%
ROCKINGER Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
ROCKINGER
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D-value: 98,1 kN. Hole: M21 mm. No. of holes: 4. Colour: Black. More
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Engine preheater, complete 750 Watt, connection Ø 40 mm New Holland
Connection: Ø 40 mm. Power: 750 watts. More
Connection: Ø 40 mm. Power: 750 watts.
€451,52 €373,16 €415,40 €343,30
You save 8%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 102 kN. Description: Piton-Fix with manual lock and hei... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.504,05 €1.243,02 €1.158,85 €957,72
You save 23%
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
You save 8%
SACHS Thrust bearing 50 x 80 mm, 89 x 22 mm
SACHS
Dimensions (mm): 50 x 80 89 x 22 More
Dimensions (mm): 50 x 80 89 x 22
€88,38 €73,04 €81,31 €67,20
You save 8%
LUK Clutch kit double plate connection without release bearing, 30,60 kg
LUK
Supplementary set: Without release bearing | Connection: For vehicles with double-disc clutch | Contents: Pressure plate 458228007717, clutch plate 45... More
Supplementary set: Without release bearing | Connection: For vehicles ...
€843,67 €697,25 €776,18 €641,47
You save 8%
Clutch plate 280 22 x 25 mm, 10 splines organic
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Organi...
€90,78 €75,02 €83,52 €69,02
You save 8%
Thrust bearing driving clutch single 50 x 80/89 x 22 mm
Dimensions (mm): 50 x 80/89 x 22 More
Dimensions (mm): 50 x 80/89 x 22
€50,95 €42,11 €46,87 €38,74
You save 8%
Alternator 14 V, 120 A, flange 83 mm, pulley Ø 55 mm, PV x 8
Belt tension hole Ø / R (mm): - / 86,0 | Nominal values (V / A): 14 / 120 | Nominal voltage (V): 14 | Flange size (mm): 83,0 | Mounting hole Ø / R (... More
Belt tension hole Ø / R (mm): - / 86,0 | Nominal values (V / A): 14 /...
€171,71 €141,91 €157,97 €130,56
You save 8%
Steering cylinder right and left ball eye-Ø 20 mm Case IH, New Holland
Technical data: Ball eye Ø: 20 mm. More
Technical data: Ball eye Ø: 20 mm.
€443,83 €366,80 €408,32 €337,46
You save 8%
Half shaft left rear axle New Holland TD55-TD95, TD5010-TD5050
€529,17 €437,33 €486,84 €402,34
You save 8%
Gear wheel gears 23 teeth Fiat, New Holland
Number of teeth: 23. More
Number of teeth: 23.
€171,93 €142,09 €158,18 €130,72
You save 8%
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, fabric, 450 mm
GRAMMER
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 450 mm. Fore/aft isolator: Optional. ... More
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: ...
€1.125,64 €930,28 €1.035,59 €855,86
You save 8%
Showing 49 - 96 of 186

New Holland TD5010 parts for the gearbox, clutch and cooling system

The TD5010 is a straightforward tractor that rewards owners who do their own maintenance. This page lists more than 180 parts that fit the New Holland TD5010, from GRANIT, ROCKINGER, Eaton, GRAMMER and LUK.

Clutch and transmission

If you are splitting the tractor for a new clutch, there are complete clutch kits, separate clutch plates and thrust bearings for the driving clutch. Inside the gearbox you can replace gear wheels and driven shafts. Sealing rings for the lift piston and lifting shaft seals stop the hydraulics from leaking.

Do not overlook the radiator cap

A radiator cap looks trivial, yet its rubber seal and spring are what keep the cooling system under pressure. When the seal has gone hard or split, the coolant boils sooner and escapes through the overflow without any visible leak. If your TD5010 keeps running hot, replace the cap before you start on the thermostat or water pump. Only ever open it with the engine cold.

Replacing gear wheels

If a gear wheel in the TD5010 gearbox has to be replaced, look closely at the gear it meshes with as well. A new gear running against a worn partner wears faster and gets noisier. Check for chipped tooth flanks and pitting on the surface, and replace both gears if in doubt. Flush the gearbox and refill it with fresh oil at the same time so no metal particles stay behind. On the cooling fan, check the roots of the blades for fine cracks, because a blade that breaks off can damage the radiator.

Other parts for the TD5010

  • Ball joints for the steering
  • Cooling fans and radiator caps
  • Alternators
  • Gas struts
  • Automatic drawbars and Piton Fix hitches
  • GRAMMER seats from the Compacto range

Identifying the right part

The serial number of your TD5010 is on the type plate and comes in handy whenever you want to check fitment. For gear wheels, count the teeth on the old one. For a clutch plate, count the splines. Any number stamped on the part you removed is the best thing to compare with the parts on this page.

Other tractors in the TD5000 series

The other TD5000 models have separate pages, each listing the parts for that tractor:

For any other model from the brand, start from the page with all New Holland parts, where every range is sorted by type so you can get to the right page in a couple of clicks.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart