Menu
EUR

New Holland TD5040 tractor parts & technical data

Planning maintenance on a New Holland TD5040? More than 200 parts for this TD5000 series tractor are listed here, from trailer couplings to brake parts.

227 parts found for New Holland TD5040
Show:
Radiator cap Ø 58 mm, height 25,5 mm Ford, Case IH, New Holland
To fit as: Ford 2000, 5000, 2100, 5100, 7100, 2300, 2600, 3600, 4600, 5600, 7600, 5610, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8010, 82... More
To fit as: Ford 2000, 5000, 2100, 5100, 7100, 2300, 2600, 3600, 4600, ...
€16,00 €13,22
Track rod A 1077 - 1477 mm, B M22 x 1,5, D M22 x 1,5, E 28 mm
A: 1077 - 1477 mm. B: M22 x 1,5 mm. C: 16 - 18 mm. G: . D: M22 x 1,5 mm. E: 28 mm. F: 20,6 mm. More
A: 1077 - 1477 mm. B: M22 x 1,5 mm. C: 16 - 18 mm. G: . D: M22 x 1,5 m...
€179,72 €148,53 €165,34 €136,65
You save 8%
Ball joint 540 mm, M14 x 1,5, 20 mm
A: 540 mm. C: M14 x 1,5 mm. D: 20 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 540 mm. C: M14 x 1,5 mm. D: 20 mm. E: 16,2 mm. F: 18,3 mm. Taper: 1...
€60,16 €49,72 €55,35 €45,74
You save 8%
Steering cylinder eye-Ø 25 mm, length 384 mm, stroke 230 mm
Technical data: Length: 384 mm Eye Ø: 25 mm Stroke: 230 mm. More
Technical data: Length: 384 mm Eye Ø: 25 mm Stroke: 230 mm.
€466,08 €385,19 €428,79 €354,37
You save 8%
Hand brake cable 1305 mm Case IH, New Holland
Length: 1305 mm. Dimensions: Length = 1565 mm. More
Length: 1305 mm. Dimensions: Length = 1565 mm.
€44,44 €36,73 €40,88 €33,79
You save 8%
Master brake cylinder mineral oil piston Ø 38,3 mm Case IH, New Holland
€178,79 €147,76 €164,49 €135,94
You save 8%
Control gear transmission 50 teeth Fiat, New Holland
Number of teeth: 50. More
Number of teeth: 50.
€680,84 €562,68 €626,37 €517,66
You save 8%
Bowden cable 658 mm Case IH, New Holland
€14,74 €12,18
Heating element Case IH, New Holland
€274,29 €226,69 €252,35 €208,55
You save 8%
Borg Warner Cooling fan electric Ø 450 mm, thread M24 x 1,5 L
Borg Warner
Ø: 450 mm. Thread: M24 x 1.5 L. More
Ø: 450 mm. Thread: M24 x 1.5 L.
€424,45 €350,79 €357,06 €295,09
You save 16%
Counterweight Case IH JX 90-95, JXU 75-115, MXU 100-130
€1.290,97 €1.066,92 €1.187,69 €981,56
You save 8%
Counterweight Case IH, New Holland, Steyr
€1.152,15 €952,19 €1.059,98 €876,01
You save 8%
Piston, complete 3 rings, piston pin Ø 38 x 82 mm, without cylinder liner
Dimensions: 3 rings, Gudgeon pin Ø 38 x 82 mm, Combustion chamber Ø 52.3 mm, Combustion chamber depth 24 mm, Rings 2.8 (trapezoidal ring) / 2.4 mm /... More
Dimensions: 3 rings, Gudgeon pin Ø 38 x 82 mm, Combustion chamber Ø ...
€131,91 €109,02 €121,36 €100,30
You save 8%
Thermostat Ø 60,5 mm, 81 °C Case IH, Steyr, New Holland
Ø: 60,5 mm. Temperature: 81 °C. More
Ø: 60,5 mm. Temperature: 81 °C.
€47,95 €39,63 €44,11 €36,46
You save 8%
Cooling fan including fan clutch Ø 450 mm
€264,08 €218,25 €242,95 €200,79
You save 8%
Optibelt Powerband multi-rib belt 8 ribs New Holland, Case IH, Steyr
€91,87 €75,93 €84,52 €69,85
You save 8%
Silencer inner-Ø 49 mm, outer-Ø 54 mm
Version: Outer Ø: 54 mm. Dimensions: Inner Ø: 49 mm, Outer Ø: 54 mm. More
Version: Outer Ø: 54 mm. Dimensions: Inner Ø: 49 mm, Outer Ø: 54 mm
€282,30 €233,31 €259,72 €214,64
You save 8%
Tank cap thread Ø 77 / 82 mm, tank collar Ø 80 mm
Thread Ø mm: 77 / 82. Filler neck Ø: 80 mm. More
Thread Ø mm: 77 / 82. Filler neck Ø: 80 mm.
€35,20 €29,09
Feed pump Case IH, New Holland engine F4C, F4DE04, F4DE06, 667TA
GRAMMER Seat Compacto COMFORT W MSG93/721, air suspended, PVC, 482 mm
GRAMMER
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 227 mm. Seat width: 482 mm. Fore/aft isolator: Yes. Rest... More
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch:...
€1.423,43 €1.176,39 €1.359,56 €1.123,60
You save 4%
Sealing ring lift arm shaft 28 x 43 x 14 mm Ford, Case IH, Fiat, New Holland
Dimensions: 28 x 43 x 14 mm. More
Dimensions: 28 x 43 x 14 mm.
€24,63 €20,35
Seal lift arm shaft 28 x 43 x 14 mm Ford, Case IH, Steyr, New Holland
Dimensions: 28 x 43 x 14 mm. More
Dimensions: 28 x 43 x 14 mm.
€27,06 €22,37
Lifting shaft sealing ring 55 x 70 x 8/8,5 mm Ford, Fiat, New Holland
Dimensions: 55 x 70 x 8/8.5 mm. More
Dimensions: 55 x 70 x 8/8.5 mm.
€3,76 €3,11
Brake light switch oil pressure 1/8 inch NPTF, make contact 1,0 bar
Version: Thread 1/8" (NPTF), Make contact 1.0 bar, Blade terminal. More
Version: Thread 1/8" (NPTF), Make contact 1.0 bar, Blade terminal.
€79,17 €65,43 €72,84 €60,20
You save 8%
Oil pressure switch M12 x 1,5, 0,3 - 0,6 bar, blade connection
Version: 0.3 - 0.6 bar, Thread M12 x 1.5, Blade terminal. More
Version: 0.3 - 0.6 bar, Thread M12 x 1.5, Blade terminal.
€17,44 €14,41
HELLA Push button switch hazard lights 12 V, button red, 9 blade terminals 6,3 mm
HELLA
Version: Push button operation, Single circuit, for vehicles with 12 V system, red pilot light with warning symbol, splashproof (according to DIN 40 0... More
Version: Push button operation, Single circuit, for vehicles with 12 V...
€32,39 €26,77 €31,20 €25,78
You save 4%
Cobo Replacement key universal for Cobo switches
Cobo
Version: To fit various Cobo switches. More
Version: To fit various Cobo switches.
€6,73 €5,56
Work lamp halogen, 12 V, 50 W, oval
Bulb: Halogen. Form: Oval. Nominal voltage: 12 V. Power consumption: 50 W. Bulbs included: -. More
Bulb: Halogen. Form: Oval. Nominal voltage: 12 V. Power consumption: 5...
€221,62 €183,16 €212,39 €175,53
You save 4%
Sensor air pressure and temperature
€43,35 €35,83 €39,88 €32,96
You save 8%
Ball joint 100 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M22 x 1,5
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. T...
€71,69 €59,25 €65,95 €54,51
You save 8%
LUK Pilot bearing 17 x 40 x 12 mm
LUK
Dimensions: 17 x 40 x 12 mm. Menke no.: 167837. More
Dimensions: 17 x 40 x 12 mm. Menke no.: 167837.
€8,29 €6,85
LUK Pilot bearing 17 x 47 x 14 mm
LUK
Dimensions: 17 x 47 x 14 mm. Menke no.: 167836. More
Dimensions: 17 x 47 x 14 mm. Menke no.: 167836.
€38,59 €31,89
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Ø: 98.59 x 88.27 x 5.16 mm. More
Ø: 98.59 x 88.27 x 5.16 mm.
€4,43 €3,66
Water pump with gasket Case IH, Steyr, New Holland
Reference no.: S.68286. More
Reference no.: S.68286.
€97,36 €80,46 €89,57 €74,03
You save 8%
Radiator cap Ø 58 mm, height 25,5 mm
Neck Ø: 58 mm. Height: 25,5 mm. More
Neck Ø: 58 mm. Height: 25,5 mm.
€16,00 €13,22
Connecting rod bolt M10 x 1,25 x 52 mm Case IH, New Holland
Dimensions: M10 x 1.25 x 52. More
Dimensions: M10 x 1.25 x 52.
€8,06 €6,66
Lockable fuel filler cap, thread Ø 77 / 82 mm, tank collar Ø 80 mm
Thread Ø mm: 77 / 82. Filler neck Ø: 80 mm. More
Thread Ø mm: 77 / 82. Filler neck Ø: 80 mm.
€65,91 €54,47 €60,64 €50,11
You save 8%
Showing 145 - 192 of 227

New Holland TD5040 parts for the clutch, driveline and drawbar

A TD5040 that judders when pulling away, or whose clutch only bites at the very top of the pedal, is telling you the driveline needs attention. This page brings together more than 200 replacement parts that fit this New Holland, made by GRANIT and by specialists such as LUK, Eaton, ROCKINGER and GRAMMER.

Clutch and PTO

On the clutch side there are organic clutch plates, double clutch pressure plates, complete clutch kits, thrust bearings for the driving clutch and a replacement clutch cable. For the transmission you will find gear wheels and a PTO input shaft. If the tractor is already split, renew the piston sealing rings and the lift shaft seal while you are there, because reaching them later is no small job.

A workshop tip for the clutch plate: count the splines on the old plate and check the outside diameter before fitting the new one. Always replace the thrust bearing as well, since getting back to it means splitting the tractor again. While everything is apart, look at the flywheel face. Scoring or blue heat marks mean it should be skimmed before the new plate goes on.

Drawbar, seat and cooling

At the rear, much of the wear comes from hitching up. There are automatic drawbars from ROCKINGER and Piton Fix parts for the rail, so a worn pin or hook can be replaced on its own. In the cab, a GRAMMER Compacto seat gives the driver proper support again. Ball joints for the steering, gaskets and radiator caps complete the picture.

Radiator caps are easy to overlook. Once the seal inside hardens, the cooling system can no longer hold pressure and coolant slowly disappears. If your TD5040 runs hot without a visible leak, a new cap is the first and simplest thing to try.

The ball joints deserve a look now and then as well. A split dust boot lets in water and grit, and the joint can be worn out within a season. Replace such a joint complete with its boot and reset the toe-in afterwards. Before swapping the seat, check the bolt pattern on the old mounting so the Compacto seat drops into place without drilling.

Matching the right part

Check the type plate to confirm the machine really is a TD5040, and use the reference number stamped or printed on the old part when comparing clutch plates or gears. The TD5040 belongs to the New Holland TD5000 series. Its sister models have pages of their own, one for the New Holland TD5010 and one for the New Holland TD5020, each showing only the parts for that model. For every other model from the brand, start at New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart