Menu
EUR

New Holland TD5040 tractor parts & technical data

Planning maintenance on a New Holland TD5040? More than 200 parts for this TD5000 series tractor are listed here, from trailer couplings to brake parts.

227 parts found for New Holland TD5040
Show:
Clutch cable PTO clutch 1190 mm, sleeve 1000 mm, M6
Cable length (mm): 1190 | Thread: M6 | Sleeve length (mm): 1000 More
Cable length (mm): 1190 | Thread: M6 | Sleeve length (mm): 1000
€132,99 €109,91 €122,35 €101,12
You save 8%
CARLISLE External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
CARLISLE
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm More
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm
€13,46 €11,13
LUK Thrust bearing 50 x 90 x 21,6 mm
LUK
Dimensions (mm): 50 x 90 x 21.6 More
Dimensions (mm): 50 x 90 x 21.6
€88,70 €73,31 €81,60 €67,44
You save 8%
LUK Clutch plate 310UKF 22 x 25 mm, 10 splines, organic rigid
LUK
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Organic clutch lining More
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Organic...
€119,17 €98,49 €109,64 €90,61
You save 8%
Clutch plate 310 torsion damper, sintered, 40 x 45 mm, 16 splines
Dimensions (mm): 40 x 45, 16 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 40 x 45, 16 grooves | Material specifications: Sinter...
€223,08 €184,36 €205,23 €169,61
You save 8%
MAHLE Alternator 14 V, 120 A, fastening 82 / 10,2 / 86 mm, pulley-Ø 55 mm
MAHLE
Installation angle (°): r 60 | Nominal voltage (V): 14 | Nominal values (V / A): 14 / 120 | Direction of rotation: ↻ | Charging current (A): 120 | ... More
Installation angle (°): r 60 | Nominal voltage (V): 14 | Nominal valu...
€540,62 €446,79 €323,80 €267,60
You save 40%
Eaton As transmission Case IH, Fiat, Ford, New Holland, 3,10 kg
Eaton
Reference no.: 47132984 More
Reference no.: 47132984
€201,84 €166,81
FEBI Powerband multi-rib belt 8 ribs Case IH, Steyr, New Holland
FEBI
To fit as: New Holland More
To fit as: New Holland
€32,86 €27,16 €12,02 €9,93
You save 63%
FEBI Engine oil filter LF16117
€32,61 €26,95 €20,58 €17,01
You save 37%
Gear reduction starter 12 V, 4,0 kW, 10 teeth, Ø 89,0 mm
€362,82 €299,85 €333,79 €275,86
You save 8%
Expander Expander repair bolt 52 mm, Ø 25 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 52 mm. B: 31 mm. C: 12 mm. Ø D: 25 mm. Ø E: 20 mm. Ø F: 25 mm. G: 12 m... More
Type: With threaded pin at both ends, hexagon nut, with lubrication ho...
€309,23 €255,56 €284,49 €235,12
You save 8%
Half shaft right rear axle New Holland TD55-TD95, TD5010-TD5050
€645,52 €533,49 €593,88 €490,81
You save 8%
Shift ring transmission Fiat, New Holland
€112,41 €92,90 €103,42 €85,47
You save 8%
Main shaft transmission Fiat, New Holland
€296,68 €245,19 €272,95 €225,57
You save 8%
Intermediate gear reversing clutch 28/38 teeth New Holland, Fiat
€312,27 €258,07 €287,29 €237,43
You save 8%
As driven as Fiat, New Holland
€361,37 €298,65 €332,46 €274,76
You save 8%
Rail pressure sensor Case IH, Steyr, New Holland
€318,56 €263,27 €293,08 €242,21
You save 8%
Gas strut steering 420 N, 252 mm, stroke 46 mm
suitable for: Lenkung. Newtons: 420. A: 252 mm. d1: 10 mm. d2: 28 mm. Stroke: 46 mm. To fit: Steering. Reference no.: 87732038. More
suitable for: Lenkung. Newtons: 420. A: 252 mm. d1: 10 mm. d2: 28 mm. ...
€44,05 €36,41 €40,53 €33,49
You save 8%
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 3000 kg. Colour: Black. D-value: 92 kN. Version: Pivot bolt. Lock: ball... More
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load c...
€1.594,08 €1.317,42 €1.516,55 €1.253,35
You save 5%
Gear wheel reduction 50 teeth Case IH, Fiat, New Holland
€479,13 €395,98 €440,80 €364,30
You save 8%
Tank sender signal transmitter Case IH JX 60-95, New Holland TD5010-5050
Version: Signal transmitter More
Version: Signal transmitter
€293,54 €242,60 €270,06 €223,19
You save 8%
LUK Clutch 310/310TGU6 41 x 45 mm, 16 splines sintered, chain pitch 29 mm
LUK
Dimensions (mm): 41 x 45 16 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 41 x 45 16 grooves | Material specifications: Sintere...
€1.404,53 €1.160,77 €1.342,17 €1.109,23
You save 4%
Eaton Gear wheel transmission Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5131169 More
Reference no.: 5131169
€264,65 €218,72 €243,48 €201,22
You save 8%
Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, 190 ccm oil
No. of grooves: 4 | Oil quantity (ccm): 190 | Suitable oil: PAG 46 | Nominal voltage (V): 12 | Pulley Ø (mm): 112 | Refrigerant: R 134a | Fixing: DM More
No. of grooves: 4 | Oil quantity (ccm): 190 | Suitable oil: PAG 46 | N...
€495,77 €409,73 €456,11 €376,95
You save 8%
LUK Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
LUK
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Sintere...
€162,99 €134,70 €149,95 €123,93
You save 8%
Clutch plate 310, 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves | Additional information: Made in Germany More
Dimensions (mm): 22 x 25, 10 grooves | Additional information: Made in...
€91,57 €75,68 €84,24 €69,62
You save 8%
Clutch plate 280 sintered, 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Sinter...
€130,06 €107,49 €119,66 €98,89
You save 8%
Clutch plate 310 organic, 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Organi...
€125,23 €103,50 €115,21 €95,22
You save 8%
Clutch plate single clutch 35 x 40 mm, 14 splines
Additional information: Made in Germany | Dimensions (mm): 35 x 40, 14 grooves More
Additional information: Made in Germany | Dimensions (mm): 35 x 40, 14...
€445,21 €367,94 €409,59 €338,51
You save 8%
Thrust bearing single PTO clutch 70 x 110 x 20 mm
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€36,11 €29,84 €33,22 €27,46
You save 8%
Eaton Gear wheel transmission 1,72 kg Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125005 More
Reference no.: 5125005
€189,02 €156,21 €173,90 €143,72
You save 8%
FEBI Transmission-oil filter W14005
€144,29 €119,25 €43,19 €35,69
You save 70%
Expander Expander repair bolt 53 mm, Ø 20 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 53 mm. B: 30 mm. C: 12 mm. Ø D: 20 mm. Ø E: 20 mm. Ø F: 20 mm. G: 12 m... More
Type: With threaded pin at both ends, hexagon nut, with lubrication ho...
€258,61 €213,73
Brake disc Ø 164 mm, thickness 4,7 mm, 22 teeth New Holland
€51,14 €42,26 €47,05 €38,88
You save 8%
As transmission, drive shaft New Holland
€161,11 €133,15 €148,22 €122,50
You save 8%
Gear wheel reduction New Holland
€228,04 €188,46 €209,80 €173,39
You save 8%
Gear wheel transmission New Holland TD55D-TD5050
€1.008,29 €833,30 €927,63 €766,63
You save 8%
ROCKINGER Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
ROCKINGER
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D-value: 98,1 kN. Hole: M21 mm. No. of holes: 4. Colour: Black. More
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Lift rod Case IH, New Holland, Fiat
€407,79 €337,02 €375,17 €310,06
You save 8%
MANN-FILTER Secondary air filter CF990/2, main filter C17337/2
MANN-FILTER
Suitable main filter 565C17337.2 More
Suitable main filter 565C17337.2
€37,63 €31,10
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
You save 8%
LUK Clutch kit with thrust bearing and pilot bearing Case IH, New Holland
LUK
Contents: Pressure plate 458231011012, clutch plate 458331032310, release bearing 458500045900, release bearing 458500028440, pilot bearing 4584100025... More
Contents: Pressure plate 458231011012, clutch plate 458331032310, rele...
€1.672,99 €1.382,64 €1.589,15 €1.313,35
You save 5%
LUK Single clutch 280, 35 x 40, 14 splines Case IH, New Holland, Steyr
LUK
Dimensions (mm): 35 x 40 14 grooves More
Dimensions (mm): 35 x 40 14 grooves
€766,80 €633,72 €705,46 €583,02
You save 8%
SACHS Thrust bearing 50 x 80 mm, 89 x 22 mm
SACHS
Dimensions (mm): 50 x 80 89 x 22 More
Dimensions (mm): 50 x 80 89 x 22
€88,38 €73,04 €81,31 €67,20
You save 8%
LUK Clutch plate 310TDCA 40 x 45 mm, 16 splines, sintered
LUK
Dimensions (mm): 40 x 45 16 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 40 x 45 16 grooves | Material specifications: Sintere...
€280,86 €232,12 €258,39 €213,55
You save 8%
Showing 49 - 96 of 227

New Holland TD5040 parts for the clutch, driveline and drawbar

A TD5040 that judders when pulling away, or whose clutch only bites at the very top of the pedal, is telling you the driveline needs attention. This page brings together more than 200 replacement parts that fit this New Holland, made by GRANIT and by specialists such as LUK, Eaton, ROCKINGER and GRAMMER.

Clutch and PTO

On the clutch side there are organic clutch plates, double clutch pressure plates, complete clutch kits, thrust bearings for the driving clutch and a replacement clutch cable. For the transmission you will find gear wheels and a PTO input shaft. If the tractor is already split, renew the piston sealing rings and the lift shaft seal while you are there, because reaching them later is no small job.

A workshop tip for the clutch plate: count the splines on the old plate and check the outside diameter before fitting the new one. Always replace the thrust bearing as well, since getting back to it means splitting the tractor again. While everything is apart, look at the flywheel face. Scoring or blue heat marks mean it should be skimmed before the new plate goes on.

Drawbar, seat and cooling

At the rear, much of the wear comes from hitching up. There are automatic drawbars from ROCKINGER and Piton Fix parts for the rail, so a worn pin or hook can be replaced on its own. In the cab, a GRAMMER Compacto seat gives the driver proper support again. Ball joints for the steering, gaskets and radiator caps complete the picture.

Radiator caps are easy to overlook. Once the seal inside hardens, the cooling system can no longer hold pressure and coolant slowly disappears. If your TD5040 runs hot without a visible leak, a new cap is the first and simplest thing to try.

The ball joints deserve a look now and then as well. A split dust boot lets in water and grit, and the joint can be worn out within a season. Replace such a joint complete with its boot and reset the toe-in afterwards. Before swapping the seat, check the bolt pattern on the old mounting so the Compacto seat drops into place without drilling.

Matching the right part

Check the type plate to confirm the machine really is a TD5040, and use the reference number stamped or printed on the old part when comparing clutch plates or gears. The TD5040 belongs to the New Holland TD5000 series. Its sister models have pages of their own, one for the New Holland TD5010 and one for the New Holland TD5020, each showing only the parts for that model. For every other model from the brand, start at New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart