Menu
EUR

New Holland TD5.95 tractor parts & technical data

Brake parts, trailer couplings or steering components for the New Holland TD5.95? Choose from more than 170 parts for this TD5 series model here.

180 parts found for New Holland TD5.95
Show:
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
5%
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
 
ROCKINGER Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
23%
ROCKINGER
Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.285,58 €1.062,46 €990,51 €818,61
 
ROCKINGER Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
21%
ROCKINGER
Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
Automatic version
€2.805,57 €2.318,65 €2.211,65 €1.827,81
 
CARLISLE External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
CARLISLE
External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm
€13,46 €11,13
 
LUK Thrust bearing 50 x 90 x 21,6 mm
8%
LUK
Thrust bearing 50 x 90 x 21,6 mm
Dimensions (mm): 50 x 90 x 21.6
€88,70 €73,31 €81,60 €67,44
 
Clutch plate 310 torsion damper, sintered, 40 x 45 mm, 16 splines
8%
Clutch plate 310 torsion damper, sintered, 40 x 45 mm, 16 splines
Dimensions (mm): 40 x 45, 16 grooves | Material specifications: Sintered clutch ...
€223,08 €184,36 €205,23 €169,61
 
MAHLE Alternator 14 V, 120 A, fastening 82 / 10,2 / 86 mm, pulley-Ø 55 mm
40%
MAHLE
Alternator 14 V, 120 A, fastening 82 / 10,2 / 86 mm, pulley-Ø 55 mm
Installation angle (°): r 60 | Nominal voltage (V): 14 | Nominal values (V / A):...
€540,62 €446,79 €323,80 €267,60
 
FEBI Powerband multi-rib belt 8 ribs Case IH, Steyr, New Holland
63%
FEBI
Powerband multi-rib belt 8 ribs Case IH, Steyr, New Holland
To fit as: New Holland
€32,86 €27,16 €12,02 €9,93
 
FEBI Secondary air filter AF26655, CF2120
20%
FEBI
Secondary air filter AF26655, CF2120
suitable main element
€43,78 €36,18 €35,00 €28,93
 
FEBI Engine oil filter LF16117
37%
FEBI
Engine oil filter LF16117
€32,61 €26,95 €20,58 €17,01
 
Gear reduction starter 12 V, 4,0 kW, 10 teeth, Ø 89,0 mm
8%
Gear reduction starter 12 V, 4,0 kW, 10 teeth, Ø 89,0 mm
€362,82 €299,85 €333,79 €275,86
 
Expander Expander repair bolt 52 mm, Ø 25 mm, GRUB SCREW, spread 0 - 2 mm
8%
Expander
Expander repair bolt 52 mm, Ø 25 mm, GRUB SCREW, spread 0 - 2 mm
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 52 ...
€309,23 €255,56 €284,49 €235,12
 
As transmission New Holland TD 4020F-5030, 60D-95D
8%
As transmission New Holland TD 4020F-5030, 60D-95D
€224,24 €185,32 €206,30 €170,50
 
Half shaft right rear axle New Holland TD55-TD95, TD5010-TD5050
8%
Half shaft right rear axle New Holland TD55-TD95, TD5010-TD5050
€645,52 €533,49 €593,88 €490,81
 
Shift ring transmission Fiat, New Holland
8%
Shift ring transmission Fiat, New Holland
€112,41 €92,90 €103,42 €85,47
 
Intermediate gear reversing clutch 28/38 teeth New Holland, Fiat
8%
Intermediate gear reversing clutch 28/38 teeth New Holland, Fiat
Number of teeth: 28/38.
€312,27 €258,07 €287,29 €237,43
 
As driven as Fiat, New Holland
8%
As driven as Fiat, New Holland
€361,37 €298,65 €332,46 €274,76
 
Gas strut steering 420 N, 252 mm, stroke 46 mm
8%
Gas strut steering 420 N, 252 mm, stroke 46 mm
suitable for: Lenkung. Newtons: 420. A: 252 mm. d1: 10 mm. d2: 28 mm. Stroke: 46...
€44,05 €36,41 €40,53 €33,49
 
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
5%
Sauermann
Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 30...
€1.594,08 €1.317,42 €1.516,55 €1.253,35
 
Gear wheel reduction 50 teeth Case IH, Fiat, New Holland
8%
Gear wheel reduction 50 teeth Case IH, Fiat, New Holland
Number of teeth: 50
€479,13 €395,98 €440,80 €364,30
 
LUK Clutch 310/310TGU6 41 x 45 mm, 16 splines sintered, chain pitch 29 mm
4%
LUK
Clutch 310/310TGU6 41 x 45 mm, 16 splines sintered, chain pitch 29 mm
Dimensions (mm): 41 x 45 16 grooves | Material specifications: Sintered clutch l...
€1.404,53 €1.160,77 €1.342,17 €1.109,23
 
Eaton Gear wheel transmission Case IH, Fiat, Ford, New Holland, Steyr
8%
Eaton
Gear wheel transmission Case IH, Fiat, Ford, New Holland, Steyr
Reference no.: 5131169
€264,65 €218,72 €243,48 €201,22
 
Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, 190 ccm oil
8%
Aircon compressor 12 V, pulley Ø 112 mm, 4 grooves, 190 ccm oil
No. of grooves: 4 | Oil quantity (ccm): 190 | Suitable oil: PAG 46 | Nominal vol...
€495,77 €409,73 €456,11 €376,95
 
LUK Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
8%
LUK
Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Sintered clutch l...
€162,99 €134,70 €149,95 €123,93
 
Clutch plate 280 sintered, 22 x 25 mm, 10 splines
8%
Clutch plate 280 sintered, 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Sintered clutch ...
€130,06 €107,49 €119,66 €98,89
 
Clutch plate single clutch 35 x 40 mm, 14 splines
8%
Clutch plate single clutch 35 x 40 mm, 14 splines
Additional information: Made in Germany | Dimensions (mm): 35 x 40, 14 grooves
€445,21 €367,94 €409,59 €338,51
 
Thrust bearing single PTO clutch 70 x 110 x 20 mm
8%
Thrust bearing single PTO clutch 70 x 110 x 20 mm
Dimensions (mm): 70 x 110 x 20
€36,11 €29,84 €33,22 €27,46
 
Link symbol range shift 3 gears
Link symbol range shift 3 gears
€14,85 €12,27
 
Eaton Gear wheel transmission 1,72 kg Case IH, Fiat, Ford, New Holland
8%
Eaton
Gear wheel transmission 1,72 kg Case IH, Fiat, Ford, New Holland
Reference no.: 5125005
€189,02 €156,21 €173,90 €143,72
 
FEBI Transmission-oil filter W14005
70%
FEBI
Transmission-oil filter W14005
€144,29 €119,25 €43,19 €35,69
 
Expander Expander repair bolt 53 mm, Ø 20 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Expander repair bolt 53 mm, Ø 20 mm, GRUB SCREW, spread 0 - 2 mm
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 53 ...
€258,61 €213,73
 
As transmission, drive shaft New Holland
8%
As transmission, drive shaft New Holland
€161,11 €133,15 €148,22 €122,50
 
As transmission New Holland TD 4.70F-5.110, 65F-85F
8%
As transmission New Holland TD 4.70F-5.110, 65F-85F
€242,68 €200,56 €223,27 €184,52
 
Gear wheel transmission New Holland TD55D-TD5050
8%
Gear wheel transmission New Holland TD55D-TD5050
€1.008,29 €833,30 €927,63 €766,63
 
ROCKINGER Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
23%
ROCKINGER
Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D-value: 98...
€1.126,27 €930,80 €867,77 €717,17
 
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
21%
Walterscheid
Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
 
Preheating relay 12 volt with plug connection
8%
Preheating relay 12 volt with plug connection
Version: 12 V, with plug connection.
€170,59 €140,98 €156,94 €129,70
 
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
8%
Sauermann
Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
 
LUK Single clutch 280, 35 x 40, 14 splines Case IH, New Holland, Steyr
8%
LUK
Single clutch 280, 35 x 40, 14 splines Case IH, New Holland, Steyr
Dimensions (mm): 35 x 40 14 grooves
€766,80 €633,72 €705,46 €583,02
 
Shim brake Ø 171,1 x 94,3 mm, thickness 3,10 mm Case IH, New Holland
Shim brake Ø 171,1 x 94,3 mm, thickness 3,10 mm Case IH, New Holland
Thickness (mm): 3,10 | Inner Ø (mm): 94,3 | Outer Ø (mm): 171,1
€20,65 €17,07
 
SACHS Thrust bearing 50 x 80 mm, 89 x 22 mm
8%
SACHS
Thrust bearing 50 x 80 mm, 89 x 22 mm
Dimensions (mm): 50 x 80 89 x 22
€88,38 €73,04 €81,31 €67,20
 
LUK Clutch plate 310TDCA 40 x 45 mm, 16 splines, sintered
8%
LUK
Clutch plate 310TDCA 40 x 45 mm, 16 splines, sintered
Dimensions (mm): 40 x 45 16 grooves | Material specifications: Sintered clutch l...
€280,86 €232,12 €258,39 €213,55
 
Thrust bearing driving clutch single 50 x 80/89 x 22 mm
8%
Thrust bearing driving clutch single 50 x 80/89 x 22 mm
Dimensions (mm): 50 x 80/89 x 22
€50,95 €42,11 €46,87 €38,74
 
Alternator 14 V, 120 A, flange 83 mm, pulley Ø 55 mm, PV x 8
8%
Alternator 14 V, 120 A, flange 83 mm, pulley Ø 55 mm, PV x 8
Belt tension hole Ø / R (mm): - / 86,0 | Nominal values (V / A): 14 / 120 | Nomi...
€171,71 €141,91 €157,97 €130,56
 
Track rod M20 x 1, 1460 mm, taper 18 - 20,2 mm Case IH, New Holland
8%
Track rod M20 x 1, 1460 mm, taper 18 - 20,2 mm Case IH, New Holland
G (mm): 18 - 20,2 | C (mm): 18 - 20,2 | D (mm): M20 x 1 | E (mm): 35 | A (mm): 1...
€273,94 €226,40 €252,02 €208,29
 
Track rod steering
Track rod steering
€95,35 €78,80
 
Showing 49 - 96 of 180

New Holland TD5.95 parts for the driveline, steering and cooling

The TD5.95 is a tractor people keep running for a long time, and that means the driveline eventually needs attention. This page lists more than 170 replacement parts that fit it, from GRANIT, ROCKINGER, LUK, Eaton and Walterscheid.

Clutch, PTO and gearbox

For the main clutch there are clutch plates, thrust bearings and pilot bearings. Once the tractor is split, change all three together. A rough pilot bearing left in place will hum every time you press the pedal, and nobody wants to split the tractor twice. Slide the new plate onto the input shaft before fitting to make sure the splines run freely, then centre it with an alignment tool before tightening the pressure plate. If the flywheel face shows scoring or blue heat spots, have it skimmed before the new plate goes on.

The gearbox side covers gear wheels for the transmission, shafts for the PTO input and sealing rings for the piston. Pitting or chipped edges on the tooth faces are a sign to check the mating gear as well. Give new piston sealing rings a light coat of oil before fitting, so they slide in without catching on an edge and tearing.

Steering, cooling and the rest

  • Track rods and ball joints for the front axle. Measure the old track rod before you remove it, set the new one to the same length and have the toe-in checked.
  • Radiators and cooling fans. Wash a clogged radiator from the engine side outwards at low pressure so the fins stay straight. A fan with cracked blades runs out of balance and wears the water pump bearing over time.
  • Alternators, aircon compressors and gas struts for the rear window.
  • Drawbars and Piton Fix hitches for the rear. On a Piton Fix, check the locking pin and the guide for wear, as that is where the slack comes from that you feel as a jolt when pulling away.

Getting the right part for your TD5.95

Check the rating plate and note the serial number, then hold the reference number from the old part against the product details. The TD5.95 belongs to the TD5 series, and the two other models in that line have their own pages: New Holland TD5.75 and New Holland TD5.85. That way every tractor on the farm gets parts chosen for that exact model. All models of the brand are gathered under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart