Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

New Holland TD95D tractor parts & technical data

Looking for New Holland TD95D parts? This page lists more than 200 items that fit, including electrics, brake and transmission parts, and trailer couplings.

212 parts found for New Holland TD95D
Show:
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 135 ccm, connection A2
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 | Pulley Ø (mm): 132 | Reference no.: QP7H15-7849 | Suitable oil: PAG 46 | Fixi... More
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 ...
€485,74 €401,44 €446,88 €369,32
You save 8%
SANDEN Aircon compressor 12 V, pulley Ø 125 mm, 2 grooves
SANDEN
Fixing: EM | Suitable oil: SP 10 | Refrigerant: R 134a | Oil quantity (ccm): 185 | Nominal voltage (V): 12 | Pulley Ø (mm): 125 | No. of grooves: 2 More
Fixing: EM | Suitable oil: SP 10 | Refrigerant: R 134a | Oil quantity ...
€710,18 €586,93 €653,37 €539,97
You save 8%
LUK Thrust bearing 50 x 90 x 21,6 mm
LUK
Dimensions (mm): 50 x 90 x 21.6 More
Dimensions (mm): 50 x 90 x 21.6
€88,70 €73,31 €81,60 €67,44
You save 8%
MAHLE Gear reduction starter 12 V, 3,2 kW, 9 teeth, Ø 110 mm, mounting angle l 55
€657,40 €543,31 €590,62 €488,11
You save 10%
Expander Expander repair bolt 52 mm, Ø 25 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 52 mm. B: 31 mm. C: 12 mm. Ø D: 25 mm. Ø E: 20 mm. Ø F: 25 mm. G: 12 m... More
Type: With threaded pin at both ends, hexagon nut, with lubrication ho...
€309,23 €255,56 €284,49 €235,12
You save 8%
Half shaft right rear axle New Holland TD55-TD95, TD5010-TD5050
€645,52 €533,49 €593,88 €490,81
You save 8%
Shift ring transmission Fiat, New Holland
€112,41 €92,90 €103,42 €85,47
You save 8%
Main shaft transmission Fiat, New Holland
€296,68 €245,19 €272,95 €225,57
You save 8%
Intermediate gear reversing clutch 28/38 teeth New Holland, Fiat
€312,27 €258,07 €287,29 €237,43
You save 8%
Gas strut steering 420 N, 252 mm, stroke 46 mm
suitable for: Lenkung. Newtons: 420. A: 252 mm. d1: 10 mm. d2: 28 mm. Stroke: 46 mm. To fit: Steering. Reference no.: 87732038. More
suitable for: Lenkung. Newtons: 420. A: 252 mm. d1: 10 mm. d2: 28 mm. ...
€44,05 €36,41 €40,53 €33,49
You save 8%
Alternator 14 V / 65 A, form A, flange 67,0 mm
To fit as: Case IH, Deutz-Fahr, Ford, Hürlimann, Lamborghini, Massey Ferguson, New Holland, Same More
To fit as: Case IH, Deutz-Fahr, Ford, Hürlimann, Lamborghini, Massey ...
€212,68 €175,77 €195,67 €161,71
You save 8%
Gear wheel reduction 50 teeth Case IH, Fiat, New Holland
€479,13 €395,98 €440,80 €364,30
You save 8%
LUK Clutch 310/310TGU6 41 x 45 mm, 16 splines sintered, chain pitch 29 mm
LUK
Dimensions (mm): 41 x 45 16 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 41 x 45 16 grooves | Material specifications: Sintere...
€1.404,53 €1.160,77 €1.342,17 €1.109,23
You save 4%
Eaton Gear wheel transmission Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5131169 More
Reference no.: 5131169
€264,65 €218,72 €243,48 €201,22
You save 8%
Brake disc Ø 165 mm, 22 teeth, thickness 4,5 mm
€40,82 €33,74 €37,55 €31,04
You save 8%
Aircon compressor 12 V, Ø 134 mm, 2 grooves, 135 ccm
Suitable oil: PAG 46 | Pulley Ø (mm): 134 | No. of grooves: 2 | Oil quantity (ccm): 135 | Nominal voltage (V): 12 | Refrigerant: R 134a | Fixing: EM More
Suitable oil: PAG 46 | Pulley Ø (mm): 134 | No. of grooves: 2 | Oil q...
€514,14 €424,91 €473,01 €390,92
You save 8%
Clutch plate 310 organic, 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Organi...
€125,23 €103,50 €115,21 €95,22
You save 8%
Alternator 14 V, 65 A, flange 66 mm
Pulley Ø (mm): - | Belt tension hole Ø / R (mm): 10,8 / 81,0 | Pulley spacing (mm): - | Installation angle (°): 0 | Charging current (A): 65 | Addi... More
Pulley Ø (mm): - | Belt tension hole Ø / R (mm): 10,8 / 81,0 | Pulle...
€166,91 €137,94 €153,56 €126,91
You save 8%
Eaton Gear wheel transmission 1,72 kg Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125005 More
Reference no.: 5125005
€189,02 €156,21 €173,90 €143,72
You save 8%
Eaton As transmission Case IH, Fiat, Ford, New Holland, 3,10 kg
Eaton
Reference no.: 47132984 More
Reference no.: 47132984
€201,84 €166,81
HELLA Starter motor 12 V, 2,3 kW, 9 teeth, mounting Ø 110 mm, clockwise
€572,55 €473,18 €441,15 €364,59
You save 23%
Expander Expander repair bolt 53 mm, Ø 20 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 53 mm. B: 30 mm. C: 12 mm. Ø D: 20 mm. Ø E: 20 mm. Ø F: 20 mm. G: 12 m... More
Type: With threaded pin at both ends, hexagon nut, with lubrication ho...
€258,61 €213,73
Gear wheel transmission New Holland TD55D-TD5050
€1.008,29 €833,30 €927,63 €766,63
You save 8%
Lift rod Case IH, New Holland, Fiat
€407,79 €337,02 €375,17 €310,06
You save 8%
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
You save 8%
LUK Clutch kit with thrust bearing and pilot bearing Case IH, New Holland
LUK
Contents: Pressure plate 458231011012, clutch plate 458331032310, release bearing 458500045900, release bearing 458500028440, pilot bearing 4584100025... More
Contents: Pressure plate 458231011012, clutch plate 458331032310, rele...
€1.672,99 €1.382,64 €1.589,15 €1.313,35
You save 5%
Cobo Work lamp 55 W, 12 V, H3, 128 x 105 mm Case IH, New Holland
Cobo
Material: Housing: plastic, lens: glass | Power consumption (W): 55 | Mounting size (mm): 145 | Mounting type: Lateral, M10 | Bulb: H3 | Bulbs include... More
Material: Housing: plastic, lens: glass | Power consumption (W): 55 | ...
€81,95 €67,73 €75,39 €62,31
You save 8%
Clutch cable PTO shaft 1700 mm, sleeve 1520 mm, Ø 8/10 mm
Hole Ø (mm): 8 / 10 | Sleeve length (mm): 1520 | Cable length (mm): 1700 More
Hole Ø (mm): 8 / 10 | Sleeve length (mm): 1520 | Cable length (mm): 1...
€141,21 €116,70 €129,91 €107,37
You save 8%
SANDEN Aircon compressor 12 V, Ø 132 mm, 2 grooves, 175 ccm
SANDEN
Fixing: EM | Pulley Ø (mm): 132 | No. of grooves: 2 | Suitable oil: SP 20 | Refrigerant: R 134a | Nominal voltage (V): 12 | Oil quantity (ccm): 175 More
Fixing: EM | Pulley Ø (mm): 132 | No. of grooves: 2 | Suitable oil: S...
€553,03 €457,05 €508,79 €420,49
You save 8%
SACHS Thrust bearing 50 x 80 mm, 89 x 22 mm
SACHS
Dimensions (mm): 50 x 80 89 x 22 More
Dimensions (mm): 50 x 80 89 x 22
€88,38 €73,04 €81,31 €67,20
You save 8%
MAHLE Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil, V/TO
MAHLE
Pulley Ø (mm): 132 | Refrigerant: R 134a | Connection: V/TO | Fixing: EM | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Oil quantity (ccm): 135 |... More
Pulley Ø (mm): 132 | Refrigerant: R 134a | Connection: V/TO | Fixing:...
€496,43 €410,27 €297,33 €245,73
You save 40%
Double clutch DuT 310, 40 x 45 mm, 16 splines Case IH, New Holland
Additional information: Made in Germany | Dimensions (mm): 40 x 45, 16 grooves More
Additional information: Made in Germany | Dimensions (mm): 40 x 45, 16...
€808,79 €668,42 €794,09 €656,27
You save 2%
Thrust bearing driving clutch single 50 x 80/89 x 22 mm
Dimensions (mm): 50 x 80/89 x 22 More
Dimensions (mm): 50 x 80/89 x 22
€50,95 €42,11 €46,87 €38,74
You save 8%
Elring Cylinder head gasket 1,43 mm, Ø 105,5 mm engine 8045
€73,26 €60,55 €67,40 €55,70
You save 8%
Blue Print Hydraulics- / getriebeöl filters W1150/2, HF7569
€68,11 €56,29 €30,91 €25,55
You save 55%
FEBI Alternator 14 V / 65 A, form A, flange 67,0 mm
FEBI
To fit as: Case IH, Deutz-Fahr, Ford, Hürlimann, Lamborghini, Massey Ferguson, New Holland, Same More
To fit as: Case IH, Deutz-Fahr, Ford, Hürlimann, Lamborghini, Massey ...
€335,09 €276,93 €255,72 €211,34
You save 24%
HELLA Starter motor 12 V, 2,5 kW, 9 teeth, Ø 110 mm, clockwise
€345,96 €285,92 €333,20 €275,37
You save 4%
Ball joint 1515 mm, M18 x 1,5, taper 20 - 22 mm, line-Ø 34 mm
A: 1515 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. Tube Ø: 34 mm. More
A: 1515 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Tape...
€118,86 €98,23 €109,35 €90,37
You save 8%
Steering cylinder right and left ball eye-Ø 20 mm Case IH, New Holland
Technical data: Ball eye Ø: 20 mm. More
Technical data: Ball eye Ø: 20 mm.
€443,83 €366,80 €408,32 €337,46
You save 8%
Half shaft left rear axle New Holland TD55-TD95, TD5010-TD5050
€529,17 €437,33 €486,84 €402,34
You save 8%
MAHLE Radiator 460 x 539 x 62 mm New Holland, Case IH
MAHLE
To fit as: New Holland Series TD: 55D, 65D, 75D, 85D, 95D; Case IH Series JX: 55, 65, 85 More
To fit as: New Holland Series TD: 55D, 65D, 75D, 85D, 95D; Case IH Ser...
€560,95 €463,60 €335,97 €277,66
You save 40%
Water pump with gasket Ford, Case IH, Fiat, New Holland
Reference no.: S.59032. More
Reference no.: S.59032.
€135,43 €111,93 €124,60 €102,97
You save 8%
Glow plug 12 V, thread 1/2 inch BSP
Version: 12 V, thread 1/2" BSP. More
Version: 12 V, thread 1/2" BSP.
€26,85 €22,19
Feed pump Case IH, New Holland engine 8035
€42,93 €35,48 €39,50 €32,64
You save 8%
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, fabric, 450 mm
GRAMMER
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 450 mm. Fore/aft isolator: Optional. ... More
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: ...
€1.125,64 €930,28 €1.035,59 €855,86
You save 8%
Showing 49 - 96 of 212

New Holland TD95D parts

The TD95D is the kind of tractor many owners still maintain themselves, and that only works when the part fits first time. This page lists more than 200 replacement parts for it, including GRANIT, Eaton, MAHLE, GRAMMER and LUK.

Splitting for a clutch job

If you are splitting the TD95D to replace the clutch, fit a new thrust bearing while it is apart. A release bearing that looks fine on reassembly can start to squeal a few months later, and then the whole job starts again. Spin the old bearing by hand. If it feels rough or grinds, the decision is made. Grease the guide sleeve lightly and keep grease well away from the clutch plate.

What else is here for the TD95D

  • Transmission: gear wheels
  • Steering: ball joints
  • Engine: cylinder head gaskets, sealing rings, for example for the piston, thermostats with matching gaskets and O-rings, and V-belts
  • Electrics: alternators, starter motors and gear reduction starters
  • Cab: air conditioning compressors and GRAMMER Compacto seats
  • Rear: drawbars

When you change the thermostat, change its gasket and O-ring too. Old seals are flattened and tend to weep once refitted.

Cab air conditioning

If the air conditioning only blows warm air, first check whether the compressor clutch engages when you switch it on. No click and a stationary pulley face point to the power feed, a fuse or the clutch itself. If the compressor turns but the air stays warm, refrigerant has usually leaked out. After fitting a new compressor, have the system evacuated and recharged by a qualified air conditioning workshop, with the correct amount of compressor oil.

Steering check

To check a ball joint, have someone rock the steering wheel while you watch the joint. Any visible movement inside the joint means it is time for a new one. Compare the thread and taper of the old joint with the new one before fitting.

Finding the right TD95D part

The rating plate confirms you are working on a TD95D. From there, use the old part. Thermostats, starters and alternators usually carry a reference number you can compare with the item details on this page. On an air conditioning compressor, count the grooves on the pulley as well, so the belt runs true afterwards.

The TD95D is part of the New Holland TD series. Parts for the brand's other tractors are under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart