Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

New Holland TD95D tractor parts & technical data

Looking for New Holland TD95D parts? This page lists more than 200 items that fit, including electrics, brake and transmission parts, and trailer couplings.

212 parts found for New Holland TD95D
Show:
V-belt tensioner Case IH JX 55-85, New Holland TD55D-TD95D
€259,41 €214,39 €238,66 €197,24
You save 8%
V-belt with air conditioning system New Holland, Case IH, Fiat, Ford
Version: With air conditioning system. Description: With air conditioning system. More
Version: With air conditioning system. Description: With air condition...
€29,49 €24,37
Silencer inner-Ø 49 mm, outer-Ø 54 mm
Version: Outer Ø: 54 mm. Dimensions: Inner Ø: 49 mm, Outer Ø: 54 mm. More
Version: Outer Ø: 54 mm. Dimensions: Inner Ø: 49 mm, Outer Ø: 54 mm
€282,30 €233,31 €259,72 €214,64
You save 8%
Turbocharger mounting kit Fiat, Ford, New Holland, Massey Ferguson
€125,56 €103,77 €115,52 €95,47
You save 8%
Cylinder head gasket 1,43 mm Case IH, Fiat, New Holland
€37,75 €31,20
Crankshaft seal Ø 42 x 65 x 12 mm Case IH, Fiat, Steyr, New Holland
Outer Ø: 65 mm. Width: 12 mm. Inner Ø: 42 mm. More
Outer Ø: 65 mm. Width: 12 mm. Inner Ø: 42 mm.
€5,24 €4,33
Exhaust pipe downwards Case IH JX 55-85, New Holland TD55D-TD95D
Sealing ring lift arm shaft 28 x 43 x 14 mm Ford, Case IH, Fiat, New Holland
Dimensions: 28 x 43 x 14 mm. More
Dimensions: 28 x 43 x 14 mm.
€24,63 €20,35
Seal lift arm shaft 28 x 43 x 14 mm Ford, Case IH, Steyr, New Holland
Dimensions: 28 x 43 x 14 mm. More
Dimensions: 28 x 43 x 14 mm.
€27,06 €22,37
Lifting shaft sealing ring 55 x 70 x 8/8,5 mm Ford, Fiat, New Holland
Dimensions: 55 x 70 x 8/8.5 mm. More
Dimensions: 55 x 70 x 8/8.5 mm.
€3,76 €3,11
Oil pressure switch M12 x 1,5, 0,3 - 0,6 bar, blade connection
Version: 0.3 - 0.6 bar, Thread M12 x 1.5, Blade terminal. More
Version: 0.3 - 0.6 bar, Thread M12 x 1.5, Blade terminal.
€17,44 €14,41
Adaptor engine side standard thread M20 / M22
Version: Thread: M20 / M22. More
Version: Thread: M20 / M22.
€29,75 €24,59
HELLA Push button switch hazard lights 12 V, button red, 9 blade terminals 6,3 mm
HELLA
Version: Push button operation, Single circuit, for vehicles with 12 V system, red pilot light with warning symbol, splashproof (according to DIN 40 0... More
Version: Push button operation, Single circuit, for vehicles with 12 V...
€32,39 €26,77 €31,20 €25,78
You save 4%
Ball joint 100 mm, taper 16,2 - 18,3 mm, M14 x 1,5, M22 x 1,5
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. T...
€71,69 €59,25 €65,95 €54,51
You save 8%
Track rod complete A 1370 mm, B M20 x 1, D M16 x 1,5, E 30 mm
A: 1345 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 30 mm. F: 19 mm. More
A: 1345 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 30 ...
€177,78 €146,93 €163,56 €135,17
You save 8%
Radiator cap Ø 58 mm, height 25,5 mm
Neck Ø: 58 mm. Height: 25,5 mm. More
Neck Ø: 58 mm. Height: 25,5 mm.
€16,00 €13,22
O-ring 25 x 3,53 mm Ford, Case IH, Fiat, New Holland
Dimensions: 25 x 3.53 mm. More
Dimensions: 25 x 3.53 mm.
€1,90 €1,57
V-belt alternator Fendt, Fiat, Case IH, Ford, New Holland
€9,08 €7,50
Valve cover gasket Case IH, New Holland
€56,97 €47,08 €52,41 €43,32
You save 8%
Gas strut rear window 320 N, 460 mm, stroke 182 mm Case IH, New Holland
suitable for: Heckscheibe. Newtons: 320. A: 460 mm. B: 245 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 182 mm. To fit: rear screen. More
suitable for: Heckscheibe. Newtons: 320. A: 460 mm. B: 245 mm. C: 8 mm...
€37,63 €31,10
Spacer 25 x 42 x 24 mm Case IH, Fiat, New Holland
Dimensions: 25 x 42 x 24 mm. More
Dimensions: 25 x 42 x 24 mm.
€27,15 €22,44
Sealing ring piston 110 x 114 x 4 mm Fiat, Ford, New Holland
Dimensions: 110 x 114 x 4 mm. More
Dimensions: 110 x 114 x 4 mm.
€18,21 €15,05
Sealing ring piston 98 x 3,6 mm Ford, Case IH, Fiat, Steyr, New Holland
€2,99 €2,47
Gas strut rear window 350 N, 460 mm
Newtons: 350. A: 460 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear screen. Form: 2. More
Newtons: 350. A: 460 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear scr...
€30,51 €25,22
Walterscheid Piton Fix rail width 309 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.723,50 €1.424,38 €1.362,61 €1.126,13
You save 21%
Drive shaft 1070 mm, 2x M16 x 1,0
Version: Thread: 2 x M16 x 1.0. More
Version: Thread: 2 x M16 x 1.0.
€77,90 €64,38 €71,67 €59,23
You save 8%
Cobo Glass lamp left, right
Cobo
Installation location: Right, left. More
Installation location: Right, left.
€25,01 €20,67
Cobo Rear light right 184 x 78 x 70 mm, hole spacing 134 mm, 12 V
Cobo
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: Blade terminal. Width: 184 mm. Form: Rectangular, short sides bevelled. Height: 78 mm. Cable len... More
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: Blade terminal. ...
€74,74 €61,77 €68,76 €56,83
You save 8%
Thermostat gasket 74717032
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€18,53 €15,31
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€24,35 €20,12
Thrust washer Ø 171,1 x 94,3 mm, thickness 2,65 mm
Thickness: 2,65 mm. Outer Ø: 171,1 mm. Inner Ø: 94,3 mm. More
Thickness: 2,65 mm. Outer Ø: 171,1 mm. Inner Ø: 94,3 mm.
€23,60 €19,50
Optibelt V-belt AVX10, 1060 mm New Holland TD55D-TD95D, Case IH JX 55-85
Optibelt
Description: optibelt MARATHON X. h: 8 mm. Outer length: 1060 mm. Inner length: 1009 mm. Profile: AVX10. Technical data: The optibelt MARATHON X V-bel... More
Description: optibelt MARATHON X. h: 8 mm. Outer length: 1060 mm. Inne...
€30,23 €24,98
Showing 145 - 192 of 212

New Holland TD95D parts

The TD95D is the kind of tractor many owners still maintain themselves, and that only works when the part fits first time. This page lists more than 200 replacement parts for it, including GRANIT, Eaton, MAHLE, GRAMMER and LUK.

Splitting for a clutch job

If you are splitting the TD95D to replace the clutch, fit a new thrust bearing while it is apart. A release bearing that looks fine on reassembly can start to squeal a few months later, and then the whole job starts again. Spin the old bearing by hand. If it feels rough or grinds, the decision is made. Grease the guide sleeve lightly and keep grease well away from the clutch plate.

What else is here for the TD95D

  • Transmission: gear wheels
  • Steering: ball joints
  • Engine: cylinder head gaskets, sealing rings, for example for the piston, thermostats with matching gaskets and O-rings, and V-belts
  • Electrics: alternators, starter motors and gear reduction starters
  • Cab: air conditioning compressors and GRAMMER Compacto seats
  • Rear: drawbars

When you change the thermostat, change its gasket and O-ring too. Old seals are flattened and tend to weep once refitted.

Cab air conditioning

If the air conditioning only blows warm air, first check whether the compressor clutch engages when you switch it on. No click and a stationary pulley face point to the power feed, a fuse or the clutch itself. If the compressor turns but the air stays warm, refrigerant has usually leaked out. After fitting a new compressor, have the system evacuated and recharged by a qualified air conditioning workshop, with the correct amount of compressor oil.

Steering check

To check a ball joint, have someone rock the steering wheel while you watch the joint. Any visible movement inside the joint means it is time for a new one. Compare the thread and taper of the old joint with the new one before fitting.

Finding the right TD95D part

The rating plate confirms you are working on a TD95D. From there, use the old part. Thermostats, starters and alternators usually carry a reference number you can compare with the item details on this page. On an air conditioning compressor, count the grooves on the pulley as well, so the belt runs true afterwards.

The TD95D is part of the New Holland TD series. Parts for the brand's other tractors are under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart