Menu
EUR

New Holland TL70 tractor parts & technical data

Looking for New Holland TL70 parts? Pick from more than 250 items that fit this TL series tractor, such as trailer couplings, lighting and electrics.

302 parts found for New Holland TL70
Show:
Ball joint taper 18,1 - 20,3 mm, length 740 mm, M16 x 1,5, 20 mm
8%
Ball joint taper 18,1 - 20,3 mm, length 740 mm, M16 x 1,5, 20 mm
A: 740 mm. C: M16 x 1,5 mm. D: 20 mm. E: 18,1 mm. F: 20,3 mm. Taper: 18,1 - 20,3...
€59,95 €49,55 €55,15 €45,58
 
Ball joint 888 mm, M16 x 1,5, 23,8 mm, taper 18,2 - 20,5 mm
8%
Ball joint 888 mm, M16 x 1,5, 23,8 mm, taper 18,2 - 20,5 mm
A: 888 mm. C: M16 x 1,5 mm. D: 23,8 mm. E: 18,2 mm. F: 20,5 mm. Taper: 18,2 - 20...
€158,22 €130,76 €145,56 €120,30
 
Steering cylinder right and left, ball eye Ø 20 mm
8%
Steering cylinder right and left, ball eye Ø 20 mm
Technical data: Ball eye Ø: 20 mm.
€474,31 €391,99 €436,37 €360,63
 
Feed pump Case IH, New Holland engine 8035
8%
Feed pump Case IH, New Holland engine 8035
€42,93 €35,48 €39,50 €32,64
 
Lock rear window lower
Lock rear window lower
€27,65 €22,85
 
ROCKINGER Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
23%
ROCKINGER
Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.122,48 €927,67 €864,85 €714,76
 
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
23%
ROCKINGER
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.504,05 €1.243,02 €1.158,85 €957,72
 
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
23%
ROCKINGER
Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
Colour: Black. Description: Entire coupling body and bearing forged, Easy height...
€1.126,27 €930,80 €867,77 €717,17
 
ROCKINGER Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
23%
ROCKINGER
Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.431,83 €1.183,33 €1.103,20 €911,74
 
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
21%
Walterscheid
Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.820,72 €1.504,73 €1.439,48 €1.189,65
 
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
8%
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
Version: Rotation angle sensor (position), electronic linkage control, For clutc...
€151,60 €125,29 €139,47 €115,27
 
Lamp glass right, left
Lamp glass right, left
Installation location: Right, left.
€39,24 €32,43
 
Rear light left / right 235 x 70 x 45 mm, 12 V
Rear light left / right 235 x 70 x 45 mm, 12 V
Bulb: 12V10WK / R10W, 12V21WK / P21W. Width: 235 mm. Form: Rectangular, short si...
€94,35 €77,98
 
Oil pressure switch transmission differential, 2 blade terminals
8%
Oil pressure switch transmission differential, 2 blade terminals
Version: Transmission, (hydraulics) differential, 2 blade terminals.
€138,89 €114,79 €127,78 €105,60
 
Cobo Lens indicator/position light left / right
Cobo
Lens indicator/position light left / right
To fit as: Case IH, Deutz-Fahr, Fiat, Hürlimann, John Deere, Lamborghini, Landin...
€14,73 €12,17
 
MANN-FILTER Air filter C17337/2, AF25557, inner CF990/2
MANN-FILTER
Air filter C17337/2, AF25557, inner CF990/2
Suitable secondary element 565CF990.2
€44,60 €36,86
 
MAHLE Gear reduction starter 12 V, 2,6 kW, 9 teeth, Ø 110 mm, clockwise
40%
MAHLE
Gear reduction starter 12 V, 2,6 kW, 9 teeth, Ø 110 mm, clockwise
€544,83 €450,27 €326,32 €269,69
 
PTO shaft end piece 1 3/8 inch 6 splines Case IH, Steyr, New Holland
8%
PTO shaft end piece 1 3/8 inch 6 splines Case IH, Steyr, New Holland
€179,75 €148,55 €165,37 €136,67
 
Starter ring gear Ø 335/293 mm, 110 teeth
8%
Starter ring gear Ø 335/293 mm, 110 teeth
Version: Ø 335/293 mm, 110 teeth.
€54,23 €44,82 €49,89 €41,23
 
Gear lever knob Ø upper 20 mm, length 35 mm, thread M8
Gear lever knob Ø upper 20 mm, length 35 mm, thread M8
Version: Ø top 20 mm, length 35 mm, thread M8.
€7,34 €6,06
 
Borg Warner Cooling fan Ø 450 mm, hole spacing-Ø 48 mm
16%
Borg Warner
Cooling fan Ø 450 mm, hole spacing-Ø 48 mm
Ø: 450 mm. PCD: 48 mm.
€373,74 €308,88 €314,39 €259,83
 
Radiator cap grommet-Ø 57 mm, height 25 mm, for expansion tank
Radiator cap grommet-Ø 57 mm, height 25 mm, for expansion tank
Version: For expansion tank. Neck Ø: 57 mm. Height: 25 mm.
€16,00 €13,22
 
Radiator hose, bottom inner-Ø 35 mm, length 80 mm
Radiator hose, bottom inner-Ø 35 mm, length 80 mm
Inner Ø: 35 mm. Length: 80 mm.
€5,05 €4,17
 
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
Ø: 54 mm. Temperature: 79 °C.
€24,35 €20,12
 
Exhaust manifold 4 cylinder Case IH, Fiat, New Holland, Ford
8%
Exhaust manifold 4 cylinder Case IH, Fiat, New Holland, Ford
Version: 4 cylinders.
€116,87 €96,59 €107,52 €88,86
 
Steering valve ew/dw with float position 220 bar, 70 l/min
8%
Steering valve ew/dw with float position 220 bar, 70 l/min
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 70 l/m...
€940,41 €777,20 €865,18 €715,02
 
Bosch/Rexroth Hydraulic pump 14 cm³/rpm., taper 1:8, Ø 17,46, left
8%
Bosch/Rexroth
Hydraulic pump 14 cm³/rpm., taper 1:8, Ø 17,46, left
Output volume: 14 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation...
€1.389,34 €1.148,21 €1.278,19 €1.056,36
 
Gas strut roof window 150 N, 256 mm, stroke 82 mm
8%
Gas strut roof window 150 N, 256 mm, stroke 82 mm
suitable for: Dachluke. Newtons: 150. A: 256 mm. B: 144 mm. C: 8 mm. D: 7,8 mm. ...
€82,74 €68,38 €76,12 €62,91
 
Door lock, left Ford, Fiat, New Holland
8%
Door lock, left Ford, Fiat, New Holland
€165,99 €137,18 €152,71 €126,21
 
Handle right and left Case IH, New Holland
8%
Handle right and left Case IH, New Holland
€93,38 €77,17 €85,91 €71,00
 
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
20%
ROCKINGER
Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.489,09 €1.230,65 €1.197,32 €989,52
 
Brake light switch oil pressure make contact, neutral position off, M10 x 1
8%
Brake light switch oil pressure make contact, neutral position off, M10 x 1
Version: Thread M10 x 1, normally off, make contact, Blade terminal.
€39,55 €32,69 €36,39 €30,07
 
Contact switch
8%
Contact switch
€38,51 €31,83 €35,43 €29,28
 
Contact switch mechanical brake light and start safety switch
8%
Contact switch mechanical brake light and start safety switch
Version: Brake light and start safety switch.
€35,01 €28,93 €32,21 €26,62
 
Relays make contact 12 V, 30 A, without bracket, 5-pin, 6,3 mm
Relays make contact 12 V, 30 A, without bracket, 5-pin, 6,3 mm
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm.
€30,51 €25,22
 
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65...
€24,35 €20,12
 
MAHLE Starter motor 12V 2,8 kW, 9 teeth clockwise, mounting Ø 110 mm
10%
MAHLE
Starter motor 12V 2,8 kW, 9 teeth clockwise, mounting Ø 110 mm
€277,68 €229,49 €249,47 €206,18
 
Showing 145 - 192 of 302

New Holland TL70 parts for the driveline, belts and electrics

A slipping clutch, an air conditioning belt that squeals on a cold start or an alternator that has stopped charging are all jobs you can sort out with the parts on this page. There are more than 250 new replacement parts here that fit the New Holland TL70, from makers such as GRANIT, LUK, Eaton, Cobo and ROCKINGER.

Check the part number first

The quickest route to the right part is the reference number stamped into the old part or printed on its label. Type it into the search bar or compare it with the numbers listed with each product. If you are not sure the tractor really is a TL70, the identification plate on the chassis settles it. For an alternator, compare the flange and the pulley on the old unit before ordering, and for an aircon compressor count the grooves in the pulley.

What you can order for the TL70

  • Clutch and gearbox: double clutches, release bearings for the driving clutch and individual gear wheels.
  • Belts and air conditioning: V-belts, including the belt that drives the aircon compressor, and complete aircon compressors.
  • Sealing: piston sealing rings, seals for the outer lift cylinder, gaskets and O-rings at the thermostat.
  • Electrics and lights: alternators, contact switches, rear lights and indicator position lights.
  • Hitching: automatic drawbars and Piton Fix hitches, worth fitting once the pin or rail of the old hitch has worn.

A workshop tip for the clutch

If the clutch pack is coming out, order the thrust bearing with it. That bearing turns every time you press the pedal and has done just as many hours as the plate you are replacing. Splitting a tractor is a job you only want to do once. With the gearbox off, also check the crankshaft rear seal and the guide sleeve the bearing slides on, because scoring on that sleeve will chew through a new bearing in no time.

When the air conditioning stops cooling

If the cab only gets lukewarm air, first check that the clutch on the aircon compressor engages and that the V-belt is tight enough. A slipping belt turns the compressor too slowly to do much. If the compressor itself has to be replaced, have the drier renewed and the system evacuated before it is recharged, because moisture left in the circuit will ruin a new compressor quickly.

Other tractors in the TL series

The TL80, TL90 and TL100 each have their own page. If you run more than one of them, look up each tractor separately, as a part listed for the TL70 does not automatically fit its neighbour. Every other model from the brand is listed under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart