Menu
EUR

New Holland TL80 tractor parts & technical data

Trailer couplings, electrics and lighting for the New Holland TL80, plus much more. This page lists more than 300 parts for the TL series in clear groups.

321 parts found for New Holland TL80
Show:
Planetary gear transmission 19 / 14 teeth New Holland
Number of teeth: 19/14. More
Number of teeth: 19/14.
€59,07 €48,82 €54,34 €44,91
You save 8%
Sleeve for transmission Fiat, New Holland
€252,83 €208,95 €232,60 €192,23
You save 8%
Sauermann Drawbar inner part 320 mm, coupling pin 31 mm, 2000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 80,4 kN. Colour: Black. More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Connecti...
€716,17 €591,88 €658,88 €544,53
You save 8%
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.071,98 €1.712,38 €1.638,13 €1.353,83
You save 21%
LUK Thrust bearing 65 x 110 x 210 mm Case IH, Fiat, Ford, New Holland
LUK
Dimensions (mm): 65 x 110 x 210 More
Dimensions (mm): 65 x 110 x 210
€138,26 €114,26 €127,20 €105,12
You save 8%
HELLA Alternator 14 V / 70 A without belt pulley
HELLA
Nominal values (V / A): 14 / 70 | Charging current (A): 70 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 70 | Charging current (A): 70 | Nominal v...
€296,72 €245,22 €285,77 €236,18
You save 4%
Clutch cable PTO clutch 1325 mm, sleeve 1260 mm, thread M6
Cable length (mm): 1325 | Thread: M6 | Sleeve length (mm): 1260 More
Cable length (mm): 1325 | Thread: M6 | Sleeve length (mm): 1260
€155,51 €128,52 €143,07 €118,24
You save 8%
Alternator 12 V / 45 A, pulley Ø 90 mm, W-connection
Nominal voltage (V): 12 | Charging current (A): 45 | Pulley spacing (mm): 58,0 | Additional information: With W connection | Belt tension hole Ø / R ... More
Nominal voltage (V): 12 | Charging current (A): 45 | Pulley spacing (m...
€203,36 €168,07 €187,09 €154,62
You save 8%
Eaton Link wheel Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125007 More
Reference no.: 5125007
€300,25 €248,14 €276,23 €228,29
You save 8%
Eaton Main shaft transmission Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5161817 More
Reference no.: 5161817
€433,08 €357,92 €398,43 €329,28
You save 8%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, Ø 110 mm, clockwise
€657,02 €542,99 €506,23 €418,37
You save 23%
Prestolite Starter motor 24 V, 4 kW, 9 teeth clockwise
€473,30 €391,16 €435,44 €359,86
You save 8%
Track rod 2WD 1090 - 1180 mm, taper 18 - 20 mm
A: 1090 - 1180 mm. B: M24 x 1,5 mm. C: 18 - 20 mm. G: . D: M24 x 1,5 mm. E: 32 mm. F: 24,4 mm. More
A: 1090 - 1180 mm. B: M24 x 1,5 mm. C: 18 - 20 mm. G: . D: M24 x 1,5 m...
€254,26 €210,13 €233,92 €193,32
You save 8%
PTO shaft end piece 260 mm Ford, Fiat, New Holland
Version: Length 260 mm. More
Version: Length 260 mm.
€110,09 €90,98 €101,28 €83,70
You save 8%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.363,65 €1.126,98 €1.100,67 €909,64
You save 19%
PROBOSS Seat PROBOSS AS3510 air suspended, fabric, 510 mm, 12 V
PROBOSS
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 510 mm. Joystick console: Optiona... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€1.383,42 €1.143,32
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
ROCKINGER Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Description: Manual ball hitch with height-adju... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.285,58 €1.062,46 €990,51 €818,61
You save 23%
ROCKINGER Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
€2.805,57 €2.318,65 €2.211,65 €1.827,81
You save 21%
Linkage steering valve series 90, 94 and Winner
can be used in 90, 94 and Winner More
can be used in 90, 94 and Winner
€136,38 €112,71 €125,47 €103,69
You save 8%
LUK Clutch kit Case IH, Fiat, Ford, New Holland
LUK
Contents: Pressure plate 458231010511, clutch plate 458331022010 | To fit: Case IH, New Holland More
Contents: Pressure plate 458231010511, clutch plate 458331022010 | To ...
€1.215,92 €1.004,89 €1.168,65 €965,83
You save 4%
LUK Double clutch 310/310TGU6 40 x 45 mm, 16 splines sintered chain pitch 33 mm
LUK
Dimensions (mm): 40 x 45 16 grooves | web (mm): 33 | Material specifications: Sintered clutch lining More
Dimensions (mm): 40 x 45 16 grooves | web (mm): 33 | Material specific...
€1.193,19 €986,11 €1.147,73 €948,54
You save 4%
Double clutch DuT 310 sintered, 40 x 45 mm, 16 splines
Material specifications: Sintered clutch lining | Additional information: Made in Germany | Dimensions (mm): 40 x 45 16 grooves More
Material specifications: Sintered clutch lining | Additional informati...
€764,21 €631,58 €753,07 €622,37
You save 1%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 135 ccm, connection A2
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 | Pulley Ø (mm): 132 | Reference no.: QP7H15-7849 | Suitable oil: PAG 46 | Fixi... More
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 ...
€485,74 €401,44 €446,88 €369,32
You save 8%
SANDEN Aircon compressor 12 V, pulley Ø 125 mm, 2 grooves
SANDEN
Fixing: EM | Suitable oil: SP 10 | Refrigerant: R 134a | Oil quantity (ccm): 185 | Nominal voltage (V): 12 | Pulley Ø (mm): 125 | No. of grooves: 2 More
Fixing: EM | Suitable oil: SP 10 | Refrigerant: R 134a | Oil quantity ...
€710,18 €586,93 €653,37 €539,97
You save 8%
LUK Clutch kit without release bearing Case IH, Fiat, Ford, New Holland
LUK
Supplementary set: Without release bearing | Contents: Pressure plate 458131024910, clutch plate 458331021910 More
Supplementary set: Without release bearing | Contents: Pressure plate ...
€680,09 €562,06 €625,68 €517,09
You save 8%
LUK Thrust bearing 50 x 90 x 21,6 mm
LUK
Dimensions (mm): 50 x 90 x 21.6 More
Dimensions (mm): 50 x 90 x 21.6
€88,70 €73,31 €81,60 €67,44
You save 8%
LUK Clutch plate 310UKF 22 x 25 mm, 10 splines, organic rigid
LUK
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Organic clutch lining More
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Organic...
€119,17 €98,49 €109,64 €90,61
You save 8%
Clutch plate 310 torsion damper, sintered, 40 x 45 mm, 16 splines
Dimensions (mm): 40 x 45, 16 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 40 x 45, 16 grooves | Material specifications: Sinter...
€223,08 €184,36 €205,23 €169,61
You save 8%
Single clutch 310 Case IH, Fiat, Ford, New Holland
Additional information: Made in Germany More
Additional information: Made in Germany
€313,34 €258,96 €288,27 €238,24
You save 8%
Eaton As transmission Case IH, Fiat, Ford, New Holland, 3,10 kg
Eaton
Reference no.: 47132984 More
Reference no.: 47132984
€201,84 €166,81
FEBI Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
FEBI
To fit as: Antonio Carraro, Fiat, Lamborghini More
To fit as: Antonio Carraro, Fiat, Lamborghini
€288,43 €238,37 €211,40 €174,71
You save 27%
MAHLE Gear reduction starter 12 V, 3,2 kW, 9 teeth, Ø 110 mm, mounting angle l 55
€657,40 €543,31 €590,62 €488,11
You save 10%
Shift ring transmission Fiat, New Holland
€112,41 €92,90 €103,42 €85,47
You save 8%
Main shaft transmission Fiat, New Holland
€296,68 €245,19 €272,95 €225,57
You save 8%
Intermediate gear reversing clutch 28/38 teeth New Holland, Fiat
€312,27 €258,07 €287,29 €237,43
You save 8%
As driven as Fiat, New Holland
€361,37 €298,65 €332,46 €274,76
You save 8%
Gaiter Fiat, New Holland
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 3000 kg. Colour: Black. D-value: 92 kN. Version: Pivot bolt. Lock: ball... More
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load c...
€1.594,08 €1.317,42 €1.516,55 €1.253,35
You save 5%
Brake light switch oil pressure thread 1/8 NPT, with plug connection
Version: Thread 1/8" NPT, With plug connection. More
Version: Thread 1/8" NPT, With plug connection.
€61,86 €51,12 €56,91 €47,03
You save 8%
GRAMMER Tractor seat air suspended Maximo COMFORT fabric, seat width 520 mm
GRAMMER
Comfort seat with air suspension and 12V compressor. Armrests height adjustable and folding. Mechanical lumbar support. Backrest tilt adjustment. Fore... More
Comfort seat with air suspension and 12V compressor. Armrests height a...
€1.234,76 €1.020,46
Mirror unheated 236 x 180 mm, rod Ø 16 - 20 mm
Tractor type: Fiat 55-66, 60-66, 65-66, 70-66, 80-66, 55-88, 60-88, 65-88, 70-88, 80-88, 60-90, 65-90, 70-90, 80-90, 90-90, 100-90, 110-90, 115-90, 13... More
Tractor type: Fiat 55-66, 60-66, 65-66, 70-66, 80-66, 55-88, 60-88, 65...
€27,60 €22,81
Gear wheel reduction 50 teeth Case IH, Fiat, New Holland
€479,13 €395,98 €440,80 €364,30
You save 8%
Eaton Gear wheel transmission Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5131169 More
Reference no.: 5131169
€264,65 €218,72 €243,48 €201,22
You save 8%
Aircon compressor 12 V, Ø 134 mm, 2 grooves, 135 ccm
Suitable oil: PAG 46 | Pulley Ø (mm): 134 | No. of grooves: 2 | Oil quantity (ccm): 135 | Nominal voltage (V): 12 | Refrigerant: R 134a | Fixing: EM More
Suitable oil: PAG 46 | Pulley Ø (mm): 134 | No. of grooves: 2 | Oil q...
€514,14 €424,91 €473,01 €390,92
You save 8%
Showing 49 - 96 of 321

New Holland TL80 parts

More than 300 parts on this page fit the New Holland TL80, covering the clutch, gearbox, hydraulics, engine, air conditioning and lighting. Alongside GRANIT you will see names like LUK, Eaton, ROCKINGER and Cobo.

When the tractor is split

Splitting a TL80 to get at the clutch is a big job, so it pays to replace the release bearing while everything is apart. A new thrust bearing costs little compared with splitting the tractor a second time when the old one starts to whine. For the transmission there are gear wheels, and for the hydraulics there are sealing rings such as the one on the lift cylinder piston. The seal for the outer lift cylinder is here too, which is the part to look at if the linkage creeps down while the tractor is parked.

Engine, cooling and air conditioning

Engine parts include injection nozzles, starter motors and alternators, with thermostat gaskets and O-rings for the cooling system. A practical tip for the thermostat: always fit the new gasket and O-ring together and scrape the old gasket material off the housing face. Even a small leftover piece is enough to make the new thermostat weep coolant. If your TL80 has air conditioning, you will also find aircon compressors and the separate V-belt that drives the compressor. Contact switches and rear lights complete the electrical side, and drawbars and Piton Fix hitches cover the rear of the tractor. Before changing hitch systems, measure the rail on the tractor so the new drawbar fits without any reworking.

If the engine is slow to turn over, check the battery terminals and the earth strap before blaming the starter. Only when those connections are clean and tight is it worth swapping the starter motor or its solenoid.

Getting the right part first time

Check the serial plate to be sure you are dealing with a TL80. After that, the reference number on the part you removed is the quickest check. On a thermostat gasket it is often pressed into the material, while on an alternator or starter motor it sits on the plate fixed to the housing. With injection nozzles, compare the shape and position of the connections as well.

The other tractors in the TL range each have their own page showing only the parts that fit that model, which makes it easier to plan servicing across a mixed fleet.

Every other model from the brand can be reached through New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart