Menu
EUR

New Holland TL80 tractor parts & technical data

Trailer couplings, electrics and lighting for the New Holland TL80, plus much more. This page lists more than 300 parts for the TL series in clear groups.

321 parts found for New Holland TL80
Show:
LUK Single clutch 310TBFR Case IH, Fiat, Ford, New Holland
€395,47 €326,83 €363,83 €300,69
You save 8%
Clutch plate 310, 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves | Additional information: Made in Germany More
Dimensions (mm): 22 x 25, 10 grooves | Additional information: Made in...
€91,57 €75,68 €84,24 €69,62
You save 8%
MAHLE Alternator 14 V, 45 A, pulley Ø 90 mm, flange 70 mm
MAHLE
Nominal voltage (V): 14 | Mounting L / d / R (mm): 70,0 / 12,2 / 85,0 | Belt width (mm) / type: 9,7 | Direction of rotation: ↻ | Nominal values (V /... More
Nominal voltage (V): 14 | Mounting L / d / R (mm): 70,0 / 12,2 / 85,0 ...
€278,50 €230,17 €166,80 €137,85
You save 40%
Alternator 14 V, 65 A, flange 66 mm
Pulley Ø (mm): - | Belt tension hole Ø / R (mm): 10,8 / 81,0 | Pulley spacing (mm): - | Installation angle (°): 0 | Charging current (A): 65 | Addi... More
Pulley Ø (mm): - | Belt tension hole Ø / R (mm): 10,8 / 81,0 | Pulle...
€166,91 €137,94 €153,56 €126,91
You save 8%
Alternator 14 V / 55 A, pulley-Ø 82 mm, flange 72 mm
Additional information: Connections: B+ (M6), D+ (M5) | Installation angle (°): 0 | Flange size (mm): 72,0 | Belt width (mm) / type: 9,7 | Pulley spa... More
Additional information: Connections: B+ (M6), D+ (M5) | Installation a...
€181,53 €150,02 €167,01 €138,02
You save 8%
Eaton Gear wheel transmission 1,72 kg Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125005 More
Reference no.: 5125005
€189,02 €156,21 €173,90 €143,72
You save 8%
HELLA Alternator 14 V, 65 A, without belt pulley
HELLA
Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 65 | Charging current (A): 65 More
Nominal voltage (V): 14 | Additional information: Without pulley | Nom...
€318,07 €262,87 €245,07 €202,54
You save 23%
BOSCH Starter motor with reduction 12 V, 3,0 kW, 9 teeth, mounting Ø 110 mm
€523,94 €433,01 €504,61 €417,03
You save 4%
HELLA Starter motor 12 V, 2,3 kW, 9 teeth, mounting Ø 110 mm, clockwise
€572,55 €473,18 €441,15 €364,59
You save 23%
Gear wheel manually shifted transmission 20 teeth Fiat, New Holland
€75,96 €62,78 €69,88 €57,75
You save 8%
Gear wheel reduction New Holland
€228,04 €188,46 €209,80 €173,39
You save 8%
ROCKINGER Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
ROCKINGER
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D-value: 98,1 kN. Hole: M21 mm. No. of holes: 4. Colour: Black. More
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Rocker switch EHR built-in rear on the fender
Version: Mounting: on the rear mudguard. More
Version: Mounting: on the rear mudguard.
€38,57 €31,88 €35,48 €29,33
You save 8%
MANN-FILTER Secondary air filter CF990/2, main filter C17337/2
MANN-FILTER
Suitable main filter 565C17337.2 More
Suitable main filter 565C17337.2
€37,63 €31,10
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
You save 8%
Cobo Multifunction switch windshield wiser and nozzle 12 / 24 V, plug
Cobo
Version: 12/24 V, for windscreen wiper and washer system Connection cable with plug More
Version: 12/24 V, for windscreen wiper and washer system Connection ca...
€83,46 €68,98 €76,78 €63,46
You save 8%
CARLISLE Internal plate PTO clutch 1,8 mm, 98 - 133 mm
CARLISLE
Version: thickness = 1,8 mm inner = 98 mm outer = 133 mm More
Version: thickness = 1,8 mm inner = 98 mm outer = 133 mm
€39,44 €32,60 €36,28 €29,99
You save 8%
SANDEN Aircon compressor 12 V, Ø 132 mm, 2 grooves, 175 ccm
SANDEN
Fixing: EM | Pulley Ø (mm): 132 | No. of grooves: 2 | Suitable oil: SP 20 | Refrigerant: R 134a | Nominal voltage (V): 12 | Oil quantity (ccm): 175 More
Fixing: EM | Pulley Ø (mm): 132 | No. of grooves: 2 | Suitable oil: S...
€553,03 €457,05 €508,79 €420,49
You save 8%
SACHS Thrust bearing 50 x 80 mm, 89 x 22 mm
SACHS
Dimensions (mm): 50 x 80 89 x 22 More
Dimensions (mm): 50 x 80 89 x 22
€88,38 €73,04 €81,31 €67,20
You save 8%
LUK Clutch plate 310TDCA 40 x 45 mm, 16 splines, sintered
LUK
Dimensions (mm): 40 x 45 16 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 40 x 45 16 grooves | Material specifications: Sintere...
€280,86 €232,12 €258,39 €213,55
You save 8%
MAHLE Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil, V/TO
MAHLE
Pulley Ø (mm): 132 | Refrigerant: R 134a | Connection: V/TO | Fixing: EM | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Oil quantity (ccm): 135 |... More
Pulley Ø (mm): 132 | Refrigerant: R 134a | Connection: V/TO | Fixing:...
€496,43 €410,27 €297,33 €245,73
You save 40%
Thrust bearing driving clutch complete Case IH, Fiat, Ford, New Holland
Thrust bearing driving clutch single 50 x 80/89 x 22 mm
Dimensions (mm): 50 x 80/89 x 22 More
Dimensions (mm): 50 x 80/89 x 22
€50,95 €42,11 €46,87 €38,74
You save 8%
MAHLE Alternator 14 V, 55 A, flange 70 mm, pulley Ø 80 mm
MAHLE
Direction of rotation: ↻ | Belt width (mm) / type: 9,7 | Charging current (A): 55 | Pulley spacing (mm): 49,0 | Installation angle (°): 0 | Form: A... More
Direction of rotation: ↻ | Belt width (mm) / type: 9,7 | Charging cu...
€250,10 €206,69 €149,80 €123,80
You save 40%
Elring Cylinder head gasket 1,43 mm, Ø 105,5 mm engine 8045
€73,26 €60,55 €67,40 €55,70
You save 8%
FEBI Alternator 14 V / 65 A, form A, flange 67,0 mm
FEBI
To fit as: Case IH, Deutz-Fahr, Ford, Hürlimann, Lamborghini, Massey Ferguson, New Holland, Same More
To fit as: Case IH, Deutz-Fahr, Ford, Hürlimann, Lamborghini, Massey ...
€335,09 €276,93 €255,72 €211,34
You save 24%
Gear reduction starter 12 V, 3,2 kW, 9 teeth, Ø 110,0 mm, clockwise
€300,38 €248,25 €276,35 €228,39
You save 8%
HELLA Starter motor 12 V, 2,5 kW, 9 teeth, Ø 110 mm, clockwise
€345,96 €285,92 €333,20 €275,37
You save 4%
Seal kit
€50,30 €41,57 €46,28 €38,24
You save 8%
Gear wheel gears 23 teeth Fiat, New Holland
Number of teeth: 23. More
Number of teeth: 23.
€171,93 €142,09 €158,18 €130,72
You save 8%
Water pump with gasket Ford, Case IH, Fiat, New Holland
Reference no.: S.59032. More
Reference no.: S.59032.
€135,43 €111,93 €124,60 €102,97
You save 8%
Glow plug 12 V, thread 1/2 inch BSP
Version: 12 V, thread 1/2" BSP. More
Version: 12 V, thread 1/2" BSP.
€26,85 €22,19
Cylinder head bolt M12 x 1,25 x 122 mm Ford, Fiat, New Holland
Dimensions: M12 x 1.25 x 122 mm. More
Dimensions: M12 x 1.25 x 122 mm.
€7,08 €5,85
Oil pump Fiat 350-855
Bearing for lower link shaft Ø 25 mm Ford, Case IH, Fiat, New Holland
€50,42 €41,67 €46,39 €38,34
You save 8%
Stabilizer 405 - 510 mm, eye-Ø 19 mm, thread 42 x 4 mm
Eye Ø: 19 mm. C sleeve length: 318 mm. Thread: 42 x 4 mm. Length min./max.: 405 - 510 mm. More
Eye Ø: 19 mm. C sleeve length: 318 mm. Thread: 42 x 4 mm. Length min....
€166,92 €137,95 €153,57 €126,91
You save 8%
ROCKINGER Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31,5 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawba... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€910,37 €752,37 €876,79 €724,62
You save 4%
Cobo Contact switch mechanical PTO shaft, brake light, 12 / 24 V, IP65
Cobo
Version: For PTO, brake light, immobiliser, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP65, NC = normally closed, NO = norma... More
Version: For PTO, brake light, immobiliser, 12/24 V, power rating: 12 ...
€39,55 €32,69
Rear light right 199 x 85 x 145 mm, 12 V
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Width: 199 mm. Form: Rectangular, short sides rounded. Height: 85 mm. Dimensions W x H x D: 199 x 85 x 1... More
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Width: 199 mm. Form: Rec...
€55,71 €46,04 €51,25 €42,36
You save 8%
Cobo Indicator/position light 122 x 82 x 60 mm, P21W, R5W right
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 mm. Form: Rectangular. Height: 82 mm. Dimensions W x H x D: 122 x 82 x 60 mm. De... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 ...
€47,55 €39,30 €43,75 €36,15
You save 8%
Alternator 14 V / 65 A, form A, flange 70,0 mm, pulley-Ø 90,0 mm
To fit as: Case IH, Fiat, Laverda, New Holland More
To fit as: Case IH, Fiat, Laverda, New Holland
€296,09 €244,70 €272,40 €225,13
You save 8%
Panclean Cab filter 500 x 85 x 6 mm
€13,39 €11,06
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.492,67 €2.060,06 €1.970,56 €1.628,56
You save 21%
Double clutch DuT 310 organic, 40 x 45 mm, 16 splines
Dimensions (mm): 40 x 45, 16 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 40 x 45, 16 grooves | Material specifications: Organi...
€771,79 €637,84 €760,05 €628,14
You save 2%
Door contact switch 12 V / 24 V, continuous load 2 A
Version: 12 V / 24 V continuous load 2 A More
Version: 12 V / 24 V continuous load 2 A
€37,25 €30,79
Showing 97 - 144 of 321

New Holland TL80 parts

More than 300 parts on this page fit the New Holland TL80, covering the clutch, gearbox, hydraulics, engine, air conditioning and lighting. Alongside GRANIT you will see names like LUK, Eaton, ROCKINGER and Cobo.

When the tractor is split

Splitting a TL80 to get at the clutch is a big job, so it pays to replace the release bearing while everything is apart. A new thrust bearing costs little compared with splitting the tractor a second time when the old one starts to whine. For the transmission there are gear wheels, and for the hydraulics there are sealing rings such as the one on the lift cylinder piston. The seal for the outer lift cylinder is here too, which is the part to look at if the linkage creeps down while the tractor is parked.

Engine, cooling and air conditioning

Engine parts include injection nozzles, starter motors and alternators, with thermostat gaskets and O-rings for the cooling system. A practical tip for the thermostat: always fit the new gasket and O-ring together and scrape the old gasket material off the housing face. Even a small leftover piece is enough to make the new thermostat weep coolant. If your TL80 has air conditioning, you will also find aircon compressors and the separate V-belt that drives the compressor. Contact switches and rear lights complete the electrical side, and drawbars and Piton Fix hitches cover the rear of the tractor. Before changing hitch systems, measure the rail on the tractor so the new drawbar fits without any reworking.

If the engine is slow to turn over, check the battery terminals and the earth strap before blaming the starter. Only when those connections are clean and tight is it worth swapping the starter motor or its solenoid.

Getting the right part first time

Check the serial plate to be sure you are dealing with a TL80. After that, the reference number on the part you removed is the quickest check. On a thermostat gasket it is often pressed into the material, while on an alternator or starter motor it sits on the plate fixed to the housing. With injection nozzles, compare the shape and position of the connections as well.

The other tractors in the TL range each have their own page showing only the parts that fit that model, which makes it easier to plan servicing across a mixed fleet.

Every other model from the brand can be reached through New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart