Menu
EUR

New Holland TN75 tractor parts & technical data

The New Holland TN75 from the TN series has its own page here with more than 200 parts. Browse electrics, steering and front axle parts, couplings and more.

230 parts found for New Holland TN75
Show:
HELLA Starter motor 12 V, 2,5 kW, 9 teeth, Ø 110 mm, clockwise
4%
HELLA
Starter motor 12 V, 2,5 kW, 9 teeth, Ø 110 mm, clockwise
€345,96 €285,92 €333,20 €275,37
 
Seal kit hydraulic steering New Holland, Deutz-Fahr
8%
Seal kit hydraulic steering New Holland, Deutz-Fahr
€127,34 €105,24 €117,15 €96,82
 
Tank cap Case IH JX series, New Holland TN series
8%
Tank cap Case IH JX series, New Holland TN series
€65,64 €54,25 €60,39 €49,91
 
Water pump with gasket Ford, Case IH, Fiat, New Holland
8%
Water pump with gasket Ford, Case IH, Fiat, New Holland
Reference no.: S.59032.
€135,43 €111,93 €124,60 €102,97
 
Glow plug 12 V, thread 1/2 inch BSP
Glow plug 12 V, thread 1/2 inch BSP
Version: 12 V, thread 1/2" BSP.
€26,85 €22,19
 
Feed pump Case IH, New Holland engine 8035
8%
Feed pump Case IH, New Holland engine 8035
€42,93 €35,48 €39,50 €32,64
 
Turbocharger New Holland TD70, Steyr 370 Kompakt, Case IH JX 65
4%
Turbocharger New Holland TD70, Steyr 370 Kompakt, Case IH JX 65
€1.926,40 €1.592,07 €1.846,10 €1.525,70
 
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, fabric, 450 mm
8%
GRAMMER
Seat Compacto Basic M MSG83/521, mechanical, fabric, 450 mm
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. ...
€1.125,64 €930,28 €1.035,59 €855,86
 
Bearing for lower link shaft Ø 25 mm Ford, Case IH, Fiat, New Holland
8%
Bearing for lower link shaft Ø 25 mm Ford, Case IH, Fiat, New Holland
Dimensions: Ø: 25 mm.
€50,42 €41,67 €46,39 €38,34
 
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
21%
Walterscheid
Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
 
Cobo Contact switch mechanical PTO shaft, brake light, 12 / 24 V, IP65
Cobo
Contact switch mechanical PTO shaft, brake light, 12 / 24 V, IP65
Version: For PTO, brake light, immobiliser, 12/24 V, power rating: 12 V: 5-12 A,...
€39,55 €32,69
 
Rotary switch lighting and horn black, 6 blade terminals, 10 A
8%
Rotary switch lighting and horn black, 6 blade terminals, 10 A
Version: Functions: lights, horn, With 6 blade terminals, Power rating: 12 V = 2...
€50,14 €41,44 €46,13 €38,12
 
GRAMMER Tractor seat air suspended Compacto COMFORT S fabric, seat width 400 mm
GRAMMER
Tractor seat air suspended Compacto COMFORT S fabric, seat width 400 mm
Comfort seat with air suspension and 12V compressor. Height adjustment 60 mm con...
€1.170,05 €966,98
 
LUK Clutch kit Case IH JX 70 - 95, New Holland T4, T5, TD5, TN
3%
LUK
Clutch kit Case IH JX 70 - 95, New Holland T4, T5, TD5, TN
Contents: Pressure plate 458228013610, clutch plate 458328033210
€955,18 €789,41 €928,77 €767,58
 
Alternator 14 V, 65 A, flange 71,5 mm, pulley Ø 93 mm
8%
Alternator 14 V, 65 A, flange 71,5 mm, pulley Ø 93 mm
Form: A | Nominal voltage (V): 14 | Charging current (A): 65 | Belt tension hole...
€166,11 €137,28 €152,82 €126,30
 
Seal kit
Seal kit
€54,95 €45,41
 
Axial joint 110 mm, Ø 56 mm, M20 x 1,5 / M18 x 1,5
8%
Axial joint 110 mm, Ø 56 mm, M20 x 1,5 / M18 x 1,5
A: 110 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€83,37 €68,90 €76,70 €63,39
 
Ball joint taper 18,1 - 20,3 mm, length 740 mm, M16 x 1,5, 20 mm
8%
Ball joint taper 18,1 - 20,3 mm, length 740 mm, M16 x 1,5, 20 mm
A: 740 mm. C: M16 x 1,5 mm. D: 20 mm. E: 18,1 mm. F: 20,3 mm. Taper: 18,1 - 20,3...
€59,95 €49,55 €55,15 €45,58
 
Radiator hose, bottom inner-Ø 35 mm, length 80 mm
Radiator hose, bottom inner-Ø 35 mm, length 80 mm
Inner Ø: 35 mm. Length: 80 mm.
€5,05 €4,17
 
Cylinder head bolt M12 x 1,25 x 122 mm Ford, Fiat, New Holland
Cylinder head bolt M12 x 1,25 x 122 mm Ford, Fiat, New Holland
Dimensions: M12 x 1.25 x 122 mm.
€7,08 €5,85
 
GRAMMER Compacto COMFORT S MSG93/511 air suspended 12 V, seat width 400 mm
GRAMMER
Compacto COMFORT S MSG93/511 air suspended 12 V, seat width 400 mm
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch: Optional....
€1.185,81 €980,01
 
Relays N/O-contact 12 V / 70 A, 4-pin, 6,3 mm blade terminal
8%
Relays N/O-contact 12 V / 70 A, 4-pin, 6,3 mm blade terminal
Version: 12 V / 70 A, With bracket, 4-pin, blade terminal 6.3 mm.
€37,44 €30,94 €34,44 €28,47
 
Oil pressure switch transmission differential, 2 blade terminals
8%
Oil pressure switch transmission differential, 2 blade terminals
Version: Transmission, (hydraulics) differential, 2 blade terminals.
€138,89 €114,79 €127,78 €105,60
 
MAHLE Gear reduction starter 12 V, 2,6 kW, 9 teeth, Ø 110 mm, clockwise
40%
MAHLE
Gear reduction starter 12 V, 2,6 kW, 9 teeth, Ø 110 mm, clockwise
€544,83 €450,27 €326,32 €269,69
 
Seal kit hydraulic steering New Holland
8%
Seal kit hydraulic steering New Holland
€72,50 €59,92 €66,70 €55,12
 
Ball joint taper 20 - 22,3 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
8%
Ball joint taper 20 - 22,3 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,3 mm. Taper: 20 -...
€35,82 €29,60 €32,95 €27,24
 
Ball joint 53 mm, M18 x 1,5, M18 x 1,5, 20 - 22,25 mm
8%
Ball joint 53 mm, M18 x 1,5, M18 x 1,5, 20 - 22,25 mm
A: 53 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 20 mm. F: 22,25 mm. Taper: 20 - 2...
€99,79 €82,47 €91,81 €75,87
 
Starter ring gear Ø 335/293 mm, 110 teeth
8%
Starter ring gear Ø 335/293 mm, 110 teeth
Version: Ø 335/293 mm, 110 teeth.
€54,23 €44,82 €49,89 €41,23
 
BOSCH Injection nozzle DLLA 132 S 1320, S 2 mm Case IH, New Holland
15%
BOSCH
Injection nozzle DLLA 132 S 1320, S 2 mm Case IH, New Holland
GRANIT no.: 38017742. S: 2 mm. Reference no.: 99469341. Bosch type formula: DLLA...
€67,17 €55,51 €56,93 €47,05
 
Radiator cap grommet-Ø 57 mm, height 25 mm, for expansion tank
Radiator cap grommet-Ø 57 mm, height 25 mm, for expansion tank
Version: For expansion tank. Neck Ø: 57 mm. Height: 25 mm.
€16,00 €13,22
 
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
Ø: 54 mm. Temperature: 79 °C.
€24,35 €20,12
 
Stop solenoid switch New Holland, Fiat, Case IH, Ford
8%
Stop solenoid switch New Holland, Fiat, Case IH, Ford
€44,38 €36,68 €40,83 €33,74
 
GRAMMER Seat Compacto COMFORT W MSG93/721, air suspended, fabric, 482 mm
5%
GRAMMER
Seat Compacto COMFORT W MSG93/721, air suspended, fabric, 482 mm
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Option...
€1.551,34 €1.282,10 €1.477,23 €1.220,85
 
Potentiometer hydraulic linkage with connection cable and plug
8%
Potentiometer hydraulic linkage with connection cable and plug
Version: Hydraulic lifting device control, Connection cable with plug.
€238,99 €197,51 €219,87 €181,71
 
Contact switch mechanical hand brake / PTO
8%
Contact switch mechanical hand brake / PTO
Version: For hand brake/PTO.
€51,59 €42,64 €47,46 €39,23
 
Sensor getriebeöl temperature
8%
Sensor getriebeöl temperature
Version: Sensor for transmission oil temperature.
€78,03 €64,49 €71,79 €59,33
 
Contact switch mechanical brake light and start safety switch
8%
Contact switch mechanical brake light and start safety switch
Version: Brake light and start safety switch.
€35,01 €28,93 €32,21 €26,62
 
Showing 97 - 144 of 230

New Holland TN75 parts for clutch, steering and hydraulics

The New Holland TN75 is a narrow workhorse that clocks up hours between rows, in livestock buildings and around the yard. All that shifting and turning leaves its mark on the clutch, the steering and the hydraulics. This page carries more than 200 New Holland TN75 tractor parts from GRANIT, Cobo, GRAMMER, LUK and HELLA.

Clutch and driveline

For the TN75 there is a double clutch pressure plate, along with thrust bearings for the driving clutch. If the tractor is split anyway, replace the clutch and the thrust bearing in one go and take a look at the flywheel while you are there. Grooves or blue spots on the friction face mean it needs resurfacing first, otherwise the new clutch will slip or judder. A contact switch for the gear lever and a gasket for the rear engine cover belong to the same job.

Steering and hydraulics

A steering cylinder, a hydraulic pump, lifting shaft seals and seal kits keep the steering and the rear linkage dry. A tip for the lifting shaft: smooth and clean the shaft before the new seal goes on and wet the lip with a little oil. A dry lip or a burr on the shaft and the new seal will be weeping again within days.

Electrics and driver's seat

Alternators, relays and oil pressure switches cover the electrical side, and there is a separate O-ring for the thermostat. On the operator platform a GRAMMER Compacto seat fits, and at the rear there is a drawbar and Piton Fix.

  • clutch pressure plate and thrust bearing
  • steering cylinder and hydraulic pump
  • lifting shaft seals
  • alternator, relays and switches
  • seat, drawbar and Piton Fix

An oil pressure light that flickers at idle with a warm engine does not always mean a faulty switch. Check the actual pressure with a separate gauge first. If that reads fine, the switch is to blame and replacing it takes minutes. With the alternator, confirm it is charging with the engine running and check that the drive belt is tight, as a slipping belt can look just like a failed alternator.

Choosing the right part

The type plate confirms that you are dealing with a TN75. If a clutch plate or seal still shows a number, that is the surest comparison, so read it off before the old part goes in the scrap bin.

Within the TN series the New Holland TN95 has its own page too. Other New Holland models are reachable through New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart