Menu
EUR

New Holland TN95 tractor parts & technical data

Own a New Holland TN95 from the TN series? You will find more than 250 matching parts here, covering electrics, lighting, and steering and front axle parts.

278 parts found for New Holland TN95
Show:
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
€14,93 €12,33
Gas strut rear window 100 N, 405 mm, stroke 162 mm Case IH, New Holland
suitable for: Heckscheibe. Newtons: 100. A: 405 mm. B: 205 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 162 mm. To fit: Rear screen. More
suitable for: Heckscheibe. Newtons: 100. A: 405 mm. B: 205 mm. C: 8 mm...
€46,39 €38,34 €42,68 €35,27
You save 8%
GRAMMER Seat Compacto COMFORT W MSG93/721, air suspended, fabric, 482 mm
GRAMMER
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 227 mm. Seat width: 482 mm. Fore/aft isolator: Yes. R... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€1.551,34 €1.282,10 €1.477,23 €1.220,85
You save 5%
Contact switch
€38,51 €31,83 €35,43 €29,28
You save 8%
HELLA Plug 2-pin, 18 A, 6 - 24 V, insulated aardaansluiting
HELLA
Number of pins: 2. Power rating max. 24 V: 18. Current: 18 A. Nominal voltage: 6 - 24 V. Additional information: • With insulated earth connection, ... More
Number of pins: 2. Power rating max. 24 V: 18. Current: 18 A. Nominal ...
€15,06 €12,45
Cobo Headlight left / right 12 V, H4 60/55 W, left-hand rotation, ECE
Cobo
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Test mark: ECE. Light function: Dipped beam, full beam. Additional in... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€114,52 €94,64 €105,36 €87,07
You save 8%
Cobo Regulator relays 12 V, eye Ø 8,3 mm, connection 31 + 49
Cobo
Version: 12 V, enclosed with mounting eye Ø 8.3 mm, With 2 blade terminals - 31 (86) + 49 (87). More
Version: 12 V, enclosed with mounting eye Ø 8.3 mm, With 2 blade term...
€67,17 €55,51 €61,80 €51,07
You save 8%
Relays make contact 12 V, 30 A, without bracket, 5-pin, 6,3 mm
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm.
€30,51 €25,22
Tank sender 12 volt
€119,48 €98,74 €109,92 €90,84
You save 8%
Optibelt V-belt air conditioning Case IH, Massey Ferguson, Steyr, New Holland, Fendt
€24,46 €20,22
MAHLE Starter motor 12V 2,8 kW, 9 teeth clockwise, mounting Ø 110 mm
€277,68 €229,49 €249,47 €206,18
You save 10%
Cylinder hydraulic steering New Holland
€801,81 €662,65 €737,67 €609,64
You save 8%
Cap brake reservoir New Holland, Steyr, Case IH
€53,03 €43,83 €48,79 €40,32
You save 8%
Seal brake piston inner Ø 210,8 x 3,4 mm
Dimensions: Ø 210.8 x 3.4 mm. More
Dimensions: Ø 210.8 x 3.4 mm.
€24,71 €20,42
Master brake cylinder mineral oil Case IH, Steyr, New Holland, Deutz-Fahr
VICTOR REINZ Crankshaft seal rear Ø 130 x 155 mm PTFE New Holland, Case IH
€62,88 €51,97 €57,85 €47,81
You save 8%
Borg Warner Cooling fan electric Ø 450 mm, thread M24 x 1,5 L
Borg Warner
Ø: 450 mm. Thread: M24 x 1.5 L. More
Ø: 450 mm. Thread: M24 x 1.5 L.
€424,45 €350,79 €357,06 €295,09
You save 16%
Bleed valve New Holland TN85, TN95
€40,91 €33,81 €37,64 €31,11
You save 8%
Counterweight Case IH JX 90-95, JXU 75-115, MXU 100-130
€1.290,97 €1.066,92 €1.187,69 €981,56
You save 8%
FLEETGUARD Filter set TN55-TN95
FLEETGUARD
To fit: New Holland. To fit type: TN60A, TN70A, TN70F, TN70S, TN75A, TN75, TN75S, TN95, TN55, TN55D, TN55DS, TN55S, TN60DA, TN60SA, TN65, TN65D, TN65F... More
To fit: New Holland. To fit type: TN60A, TN70A, TN70F, TN70S, TN75A, T...
€241,83 €199,86 €222,48 €183,87
You save 8%
Powerband 8 ribs, 1367 mm Case IH, New Holland, Steyr
Belt length: 1367 mm. Ribs: 8 n. Length: 1367 mm. Number of ribs: 8. More
Belt length: 1367 mm. Ribs: 8 n. Length: 1367 mm. Number of ribs: 8.
€83,33 €68,87 €76,66 €63,36
You save 8%
Tank cap thread Ø 59 / 64 mm
Thread Ø mm: 59 / 64. More
Thread Ø mm: 59 / 64.
€47,03 €38,87 €43,27 €35,76
You save 8%
Piston, complete 3 rings, piston pin Ø 38 x 82 mm, without cylinder liner
Dimensions: 3 rings, Gudgeon pin Ø 38 x 82 mm, Combustion chamber Ø 52.3 mm, Combustion chamber depth 24 mm, Rings 2.8 (trapezoidal ring) / 2.4 mm /... More
Dimensions: 3 rings, Gudgeon pin Ø 38 x 82 mm, Combustion chamber Ø ...
€131,91 €109,02 €121,36 €100,30
You save 8%
Cooling fan including fan clutch Ø 450 mm
€264,08 €218,25 €242,95 €200,79
You save 8%
Optibelt Powerband multi-rib belt 8 ribs New Holland, Case IH, Steyr
€91,87 €75,93 €84,52 €69,85
You save 8%
Crankshaft, 4-cylinder forged Fiat L 65-95, New Holland TN80-TN95
Notes: Please follow the instructions in the installation guide. Please complete the test instruction report contained therein, and return it to garan... More
Notes: Please follow the instructions in the installation guide. Pleas...
€866,95 €716,49 €847,59 €700,49
You save 2%
Tank cap thread Ø 77 / 82 mm, tank collar Ø 80 mm
Thread Ø mm: 77 / 82. Filler neck Ø: 80 mm. More
Thread Ø mm: 77 / 82. Filler neck Ø: 80 mm.
€35,20 €29,09
Silencer New Holland
€293,80 €242,81 €270,30 €223,39
You save 8%
Feed pump Case IH, New Holland engine F4C, F4DE04, F4DE06, 667TA
Bosch/Rexroth Hydraulic pump clockwise 25 cm³/rpm., taper 1:8, Ø 17,46
Bosch/Rexroth
Output volume: 25 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation: Right. Line connection suction side: Ø 40mm, 4-Loch, M8. Line conn... More
Output volume: 25 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction ...
€694,50 €573,97 €638,94 €528,05
You save 8%
GRAMMER Seat Compacto COMFORT W MSG93/721, air suspended, PVC, 482 mm
GRAMMER
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 227 mm. Seat width: 482 mm. Fore/aft isolator: Yes. Rest... More
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch:...
€1.423,43 €1.176,39 €1.359,56 €1.123,60
You save 4%
Gas strut door 200 N, 190 mm, stroke 49 mm Case IH, Steyr, New Holland
suitable for: Tür. Newtons: 200. A: 190 mm. B: 120 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 18 mm. Stroke: 49 mm. To fit: Door. More
suitable for: Tür. Newtons: 200. A: 190 mm. B: 120 mm. C: 10 mm. D: 1...
€51,06 €42,20 €46,98 €38,82
You save 8%
Lift arm shaft 535 mm, Ø 25 mm New Holland, Case IH
Dimensions: Length = 535, Ø 25 mm. More
Dimensions: Length = 535, Ø 25 mm.
€91,81 €75,88 €84,47 €69,81
You save 8%
Lifting shaft sealing ring 55 x 70 x 8/8,5 mm Ford, Fiat, New Holland
Dimensions: 55 x 70 x 8/8.5 mm. More
Dimensions: 55 x 70 x 8/8.5 mm.
€3,76 €3,11
Bush left lift arm shaft 55 x 60 x 30 mm New Holland, Ford, Fiat
Dimensions: 55 x 60 x 30 mm. Outer Ø: 60 mm. Inner Ø: 55 mm. Height 1: 30 mm. More
Dimensions: 55 x 60 x 30 mm. Outer Ø: 60 mm. Inner Ø: 55 mm. Height ...
€28,00 €23,14
AL-KO Chock UK 800 folding, 2.500 kg, tires radius 830 mm
AL-KO
Static tyre radius up to max.: 830 mm. More
Static tyre radius up to max.: 830 mm.
€114,26 €94,43 €109,22 €90,27
You save 4%
Chock folding Fiat, Ford, New Holland
€103,91 €85,88 €95,60 €79,01
You save 8%
Wiper motor windshield 12 V, angle 80°, M16 x 1, as conical 10 x M8
Volts: 12. W: konisch 10 x M8 mm. Angle: 80 °. B: 33 mm. D: M16 x 1 mm. More
Volts: 12. W: konisch 10 x M8 mm. Angle: 80 °. B: 33 mm. D: M16 x 1 m...
€298,34 €246,56 €274,47 €226,84
You save 8%
Showing 145 - 192 of 278

New Holland TN95 parts

A TN95 often handles the daily work around the barn and yard, so maintenance touches very different parts of the tractor. This page holds more than 250 parts that fit it, from GRANIT, Cobo, LUK, MAHLE and GRAMMER.

Lift linkage

For the hydraulic lift there are lifting shaft seals, lift arm shaft bushes and piston sealing rings, which are also listed for Ford and Fiat. Play in the lift arms usually comes from worn bushes. Replace the bushes on both sides and fit new seals at the same time to keep the oil in and the dirt out.

Air conditioning and cab

If you spend long summer days in the cab, you want the air conditioning to work. There are air conditioning compressors and V-belts for the compressor drive. You will also find gas struts for the door, Compacto seats, combined indicator and position lights, tank caps and ball type drawbars. If an indicator and position light only works half the time, check its earth connection first. Keep the drawbar ball lightly greased and put a cap on it when not in use. A squealing compressor belt is loose or glazed and should be replaced.

A tank cap with a blocked vent can make the engine lose power after a while because a vacuum builds up in the tank. A new cap is a quick fix.

Starting, charging and clutch

The electrical side is covered by alternators, starter motors and gear reduction starters. Check the voltage before choosing a starter, as there are versions for twelve and for twenty four volt systems. If unsure, read the plate on the old starter or measure the battery voltage. A new alternator needs a tight belt. Check it again after a few working hours, because new belts stretch a little at first.

For the clutch there are thrust bearings and double clutch assemblies, some from LUK. A thrust bearing that starts to sing when you press the clutch is best replaced in good time, as a seized bearing damages the clutch assembly too.

Choosing the right part

The type plate tells you if it really is a TN95. For seals and bushes, compare the number on the old part with the reference number shown with the product, and check left or right.

Within the TN series, the New Holland TN75 also has its own page. If one sits next to your TN95, order its parts there. For other models from the brand, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart