Menu
EUR

New Holland TN95 tractor parts & technical data

Own a New Holland TN95 from the TN series? You will find more than 250 matching parts here, covering electrics, lighting, and steering and front axle parts.

276 parts found for New Holland TN95
Show:
GRANIT Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
GRANIT
Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switching funct...
€6,15 €5,08
 
Cobo Socket 3-pin 12/24 V, 2 x 25 A, 1 x 5 A, 2-hole fastening
Cobo
Socket 3-pin 12/24 V, 2 x 25 A, 1 x 5 A, 2-hole fastening
Version: 2-hole fixing 12/24 V, 2 x 25 amps, 1 x 5 amps suitable for plug 227250...
€16,60 €13,72
 
GRANIT Relays make contact 12 V, 30 A, without bracket, 5-pin, 6,3 mm
GRANIT
Relays make contact 12 V, 30 A, without bracket, 5-pin, 6,3 mm
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm.
€29,20 €24,13
 
DANA Spicer Synchro unit, complete for splitter
DANA Spicer
Synchro unit, complete for splitter
€333,70 €275,79
 
MAHLE Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, EM, H/TO
40%
MAHLE
Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, EM, H/TO
Nominal voltage (V): 12 | Additional information: With sealing ring | Connection...
€524,64 €433,59 €312,25 €258,06
 
GRANIT Steering cylinder Case IH, New Holland, Steyr
5%
GRANIT
Steering cylinder Case IH, New Holland, Steyr
Reference no.: 5178707
€1.184,15 €978,64 €1.124,90 €929,67
 
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
5%
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 62 | Length ...
€56,19 €46,44 €53,35 €44,09
 
SANDEN Airco compressor 24 V, 175 cm³, pulley Ø 132 mm, 2 grooves
5%
SANDEN
Airco compressor 24 V, 175 cm³, pulley Ø 132 mm, 2 grooves
No. of grooves: 2 | Nominal voltage (V): 24 | Refrigerant: R134a | Type: A2 Roto...
€610,41 €504,47 €579,85 €479,21
 
LUK Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
5%
LUK
Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Sintered clutch l...
€156,20 €129,09 €148,35 €122,60
 
Seal kit hydraulic steering New Holland T4060 N, TN95
5%
Seal kit hydraulic steering New Holland T4060 N, TN95
€94,60 €78,18 €89,85 €74,26
 
GRANIT Ball joint taper 20 - 22,3 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
5%
GRANIT
Ball joint taper 20 - 22,3 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,3 mm. Taper: 20 -...
€34,33 €28,37 €32,60 €26,94
 
GRANIT Steering cylinder right and left, ball eye Ø 20 mm
5%
GRANIT
Steering cylinder right and left, ball eye Ø 20 mm
Technical data: Ball eye Ø: 20 mm.
€454,54 €375,65 €431,80 €356,86
 
LUK Pilot bearing 17 x 47 x 14 mm
5%
LUK
Pilot bearing 17 x 47 x 14 mm
Dimensions: 17 x 47 x 14 mm. Menke no.: 167836.
€32,31 €26,70 €30,65 €25,33
 
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
20%
ROCKINGER
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.306,80 €1.080,00 €1.050,65 €868,31
 
Dayco Multi-rib belt Powerband 8 ribs, 1385 mm
5%
Dayco
Multi-rib belt Powerband 8 ribs, 1385 mm
Length: 1385 mm. Ribs: 8 n.
€50,40 €41,65 €47,85 €39,55
 
Heating element Ford, Fiat, New Holland
5%
Heating element Ford, Fiat, New Holland
€309,46 €255,75 €293,95 €242,93
 
Optibelt Powerband multi-rib belt 8 ribs New Holland, Case IH, Steyr
5%
Optibelt
Powerband multi-rib belt 8 ribs New Holland, Case IH, Steyr
€88,04 €72,76 €83,60 €69,09
 
Optibelt V-belt air conditioning Fendt, Massey Ferguson, Case IH, Steyr, New Holland
Optibelt
V-belt air conditioning Fendt, Massey Ferguson, Case IH, Steyr, New Holland
Description: For air conditioning system.
€23,40 €19,34
 
GRANIT Nut cylinder head Ford, Fiat, New Holland
GRANIT
Nut cylinder head Ford, Fiat, New Holland
€17,70 €14,63
 
Bosch/Rexroth Hydraulic pump clockwise 19 cm³/rpm., taper 1:8, Ø 17,46 mm
5%
Bosch/Rexroth
Hydraulic pump clockwise 19 cm³/rpm., taper 1:8, Ø 17,46 mm
Output volume: 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation...
€417,97 €345,43 €397,00 €328,10
 
GRANIT Ring 23 x 40 x 25 mm Fiat L 60-95, New Holland TN55-TN95
GRANIT
Ring 23 x 40 x 25 mm Fiat L 60-95, New Holland TN55-TN95
Dimensions: 23 x 40 x 25 mm.
€9,95 €8,22
 
Showing 73 - 96 of 276

New Holland TN95 parts

A TN95 often handles the daily work around the barn and yard, so maintenance touches very different parts of the tractor. This page holds more than 250 parts that fit it, from GRANIT, Cobo, LUK, MAHLE and GRAMMER.

Lift linkage

For the hydraulic lift there are lifting shaft seals, lift arm shaft bushes and piston sealing rings, which are also listed for Ford and Fiat. Play in the lift arms usually comes from worn bushes. Replace the bushes on both sides and fit new seals at the same time to keep the oil in and the dirt out.

Air conditioning and cab

If you spend long summer days in the cab, you want the air conditioning to work. There are air conditioning compressors and V-belts for the compressor drive. You will also find gas struts for the door, Compacto seats, combined indicator and position lights, tank caps and ball type drawbars. If an indicator and position light only works half the time, check its earth connection first. Keep the drawbar ball lightly greased and put a cap on it when not in use. A squealing compressor belt is loose or glazed and should be replaced.

A tank cap with a blocked vent can make the engine lose power after a while because a vacuum builds up in the tank. A new cap is a quick fix.

Starting, charging and clutch

The electrical side is covered by alternators, starter motors and gear reduction starters. Check the voltage before choosing a starter, as there are versions for twelve and for twenty four volt systems. If unsure, read the plate on the old starter or measure the battery voltage. A new alternator needs a tight belt. Check it again after a few working hours, because new belts stretch a little at first.

For the clutch there are thrust bearings and double clutch assemblies, some from LUK. A thrust bearing that starts to sing when you press the clutch is best replaced in good time, as a seized bearing damages the clutch assembly too.

Choosing the right part

The type plate tells you if it really is a TN95. For seals and bushes, compare the number on the old part with the reference number shown with the product, and check left or right.

Within the TN series, the New Holland TN75 also has its own page. If one sits next to your TN95, order its parts there. For other models from the brand, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart