Menu
EUR

New Holland TN95 tractor parts & technical data

Own a New Holland TN95 from the TN series? You will find more than 250 matching parts here, covering electrics, lighting, and steering and front axle parts.

276 parts found for New Holland TN95
Show:
Cobo Push button switch built-in make contact 12 V/30 A, 24 V/20 A, IP40
Cobo
Version: For flush mounting, make contact, normally off, 12 V / 30 A inductive, 24 V / 20 A inductive, IP40. Reference no.: 336.019.006. More
Version: For flush mounting, make contact, normally off, 12 V / 30 A i...
€20,50 €16,94
Cobo Headlight left / right 12 V, H4 60/55 W, left-hand rotation, ECE
Cobo
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Test mark: ECE. Light function: Dipped beam, full beam. Additional in... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€109,75 €90,70 €104,25 €86,16
You save 5%
GRANIT Preheating relay 12 volt with plug connection
GRANIT
Version: 12 V, with plug connection. More
Version: 12 V, with plug connection.
€171,65 €141,86 €155,30 €128,35
You save 10%
GRANIT Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
GRANIT
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€23,30 €19,26
LUK Single clutch 280, 35 x 40, 14 splines Case IH, New Holland, Steyr
LUK
Dimensions (mm): 35 x 40 14 grooves More
Dimensions (mm): 35 x 40 14 grooves
€734,83 €607,30 €698,00 €576,86
You save 5%
Steering cylinder New Holland T4060 N, TN95
Reference no.: 5190159 More
Reference no.: 5190159
€1.009,50 €834,30 €959,00 €792,56
You save 5%
GRANIT Steering cylinder S1 Case IH, New Holland, Steyr
GRANIT
Reference no.: 47136495 More
Reference no.: 47136495
€764,84 €632,10 €691,95 €571,86
You save 10%
DANA Spicer Synchro unit, complete 1ste / 2de and 3de / 4de gear, Ø 74 mm
€657,75 €543,60 €595,10 €491,82
You save 10%
DANA Spicer Synchro unit, complete main shaft 16 x 16, Ø 82 x 128 mm, width 49,9 mm
DANA Spicer
Width (mm): 49,9 | Ø (mm): 82 x 128 More
Width (mm): 49,9 | Ø (mm): 82 x 128
€760,10 €628,18
GRANIT Clutch cable PTO clutch 1190 mm, sleeve 1000 mm, M6
GRANIT
Cable length (mm): 1190 | Thread: M6 | Sleeve length (mm): 1000 More
Cable length (mm): 1190 | Thread: M6 | Sleeve length (mm): 1000
€127,45 €105,33 €121,00 €100,00
You save 5%
Clutch cable driving clutch 550 mm, sleeve 290 mm, Ø 6 mm, M6
Hole Ø (mm): 6 | Sleeve length (mm): 290 | Cable length (mm): 550 | Thread: M6 More
Hole Ø (mm): 6 | Sleeve length (mm): 290 | Cable length (mm): 550 | T...
€62,58 €51,72 €59,45 €49,13
You save 5%
CARLISLE External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
CARLISLE
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm More
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm
€10,32 €8,53 €9,80 €8,10
You save 5%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 135 ccm, connection A2
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 | Pulley Ø (mm): 132 | Reference no.: QP7H15-7849 | Suitable oil: PAG 46 | Fixi... More
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 ...
€465,49 €384,70 €442,20 €365,45
You save 5%
LUK Thrust bearing 50 x 90 x 21,6 mm
LUK
Dimensions (mm): 50 x 90 x 21.6 More
Dimensions (mm): 50 x 90 x 21.6
€85,00 €70,25 €80,75 €66,74
You save 5%
MAHLE Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil, V/TO
MAHLE
Pulley Ø (mm): 132 | Refrigerant: R 134a | Connection: V/TO | Fixing: EM | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Oil quantity (ccm): 135 |... More
Pulley Ø (mm): 132 | Refrigerant: R 134a | Connection: V/TO | Fixing:...
€475,74 €393,17 €297,30 €245,70
You save 38%
GRANIT Clutch plate 280 sintered, 22 x 25 mm, 10 splines
GRANIT
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Sinter...
€124,64 €103,01 €118,40 €97,85
You save 5%
GRANIT Clutch plate single clutch 35 x 40 mm, 14 splines
GRANIT
Additional information: Made in Germany | Dimensions (mm): 35 x 40, 14 grooves More
Additional information: Made in Germany | Dimensions (mm): 35 x 40, 14...
€406,80 €336,20 €386,45 €319,38
You save 5%
Alternator 14 V, 120 A, flange 83 mm, pulley Ø 55 mm, PV x 8
Belt tension hole Ø / R (mm): - / 86,0 | Nominal values (V / A): 14 / 120 | Nominal voltage (V): 14 | Flange size (mm): 83,0 | Mounting hole Ø / R (... More
Belt tension hole Ø / R (mm): - / 86,0 | Nominal values (V / A): 14 /...
€164,55 €135,99 €156,30 €129,17
You save 5%
GRANIT Mirror 275 x 457 x 159 mm, rod-Ø 20 mm, hole pattern 40 mm
GRANIT
Hole pattern (mm): 40 | Rod Ø (mm): 20 | Dimensions (mm): 275 x 457 x 159 | Radius of curvature (mm): 2000 | Installation location: links More
Hole pattern (mm): 40 | Rod Ø (mm): 20 | Dimensions (mm): 275 x 457 x...
€75,14 €62,10 €71,35 €58,97
You save 5%
GRANIT Mirror Case IH, New Holland
€52,10 €43,06 €49,45 €40,87
You save 5%
Elring Crankshaft seal for 70 x 100 x 12,67 / 16 mm, PTFE / ACM
Elring
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylic rubber) More
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylic rubber)
€37,33 €30,85 €35,45 €29,30
You save 5%
MAHLE Gear reduction starter 12 V, 2,6 kW, 9 teeth, Ø 110 mm, clockwise
€522,12 €431,50 €326,30 €269,67
You save 38%
MAHLE Gear reduction starter 12 V, 4,2 kW, 9 teeth, Ø 110 mm, clockwise
€613,17 €506,75 €383,20 €316,69
You save 38%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, Ø 110 mm, clockwise
€629,64 €520,36 €506,20 €418,35
You save 20%
Showing 145 - 168 of 276

New Holland TN95 parts

A TN95 often handles the daily work around the barn and yard, so maintenance touches very different parts of the tractor. This page holds more than 250 parts that fit it, from GRANIT, Cobo, LUK, MAHLE and GRAMMER.

Lift linkage

For the hydraulic lift there are lifting shaft seals, lift arm shaft bushes and piston sealing rings, which are also listed for Ford and Fiat. Play in the lift arms usually comes from worn bushes. Replace the bushes on both sides and fit new seals at the same time to keep the oil in and the dirt out.

Air conditioning and cab

If you spend long summer days in the cab, you want the air conditioning to work. There are air conditioning compressors and V-belts for the compressor drive. You will also find gas struts for the door, Compacto seats, combined indicator and position lights, tank caps and ball type drawbars. If an indicator and position light only works half the time, check its earth connection first. Keep the drawbar ball lightly greased and put a cap on it when not in use. A squealing compressor belt is loose or glazed and should be replaced.

A tank cap with a blocked vent can make the engine lose power after a while because a vacuum builds up in the tank. A new cap is a quick fix.

Starting, charging and clutch

The electrical side is covered by alternators, starter motors and gear reduction starters. Check the voltage before choosing a starter, as there are versions for twelve and for twenty four volt systems. If unsure, read the plate on the old starter or measure the battery voltage. A new alternator needs a tight belt. Check it again after a few working hours, because new belts stretch a little at first.

For the clutch there are thrust bearings and double clutch assemblies, some from LUK. A thrust bearing that starts to sing when you press the clutch is best replaced in good time, as a seized bearing damages the clutch assembly too.

Choosing the right part

The type plate tells you if it really is a TN95. For seals and bushes, compare the number on the old part with the reference number shown with the product, and check left or right.

Within the TN series, the New Holland TN75 also has its own page. If one sits next to your TN95, order its parts there. For other models from the brand, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart