Menu
EUR

New Holland TN95 tractor parts & technical data

Own a New Holland TN95 from the TN series? You will find more than 250 matching parts here, covering electrics, lighting, and steering and front axle parts.

276 parts found for New Holland TN95
Show:
Cobo Push button switch built-in make contact 12 V/30 A, 24 V/20 A, IP40
Cobo
Push button switch built-in make contact 12 V/30 A, 24 V/20 A, IP40
Version: For flush mounting, make contact, normally off, 12 V / 30 A inductive, ...
€20,50 €16,94
 
Cobo Headlight left / right 12 V, H4 60/55 W, left-hand rotation, ECE
5%
Cobo
Headlight left / right 12 V, H4 60/55 W, left-hand rotation, ECE
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V....
€109,75 €90,70 €104,25 €86,16
 
GRANIT Preheating relay 12 volt with plug connection
10%
GRANIT
Preheating relay 12 volt with plug connection
Version: 12 V, with plug connection.
€171,65 €141,86 €155,30 €128,35
 
GRANIT Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
GRANIT
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65...
€23,30 €19,26
 
LUK Single clutch 280, 35 x 40, 14 splines Case IH, New Holland, Steyr
5%
LUK
Single clutch 280, 35 x 40, 14 splines Case IH, New Holland, Steyr
Dimensions (mm): 35 x 40 14 grooves
€734,83 €607,30 €698,00 €576,86
 
Steering cylinder New Holland T4060 N, TN95
5%
Steering cylinder New Holland T4060 N, TN95
Reference no.: 5190159
€1.009,50 €834,30 €959,00 €792,56
 
GRANIT Steering cylinder S1 Case IH, New Holland, Steyr
10%
GRANIT
Steering cylinder S1 Case IH, New Holland, Steyr
Reference no.: 47136495
€764,84 €632,10 €691,95 €571,86
 
DANA Spicer Synchro unit, complete 1ste / 2de and 3de / 4de gear, Ø 74 mm
10%
DANA Spicer
Synchro unit, complete 1ste / 2de and 3de / 4de gear, Ø 74 mm
Ø (mm): 74
€657,75 €543,60 €595,10 €491,82
 
DANA Spicer Synchro unit, complete main shaft 16 x 16, Ø 82 x 128 mm, width 49,9 mm
DANA Spicer
Synchro unit, complete main shaft 16 x 16, Ø 82 x 128 mm, width 49,9 mm
Width (mm): 49,9 | Ø (mm): 82 x 128
€760,10 €628,18
 
GRANIT Clutch cable PTO clutch 1190 mm, sleeve 1000 mm, M6
5%
GRANIT
Clutch cable PTO clutch 1190 mm, sleeve 1000 mm, M6
Cable length (mm): 1190 | Thread: M6 | Sleeve length (mm): 1000
€127,45 €105,33 €121,00 €100,00
 
Clutch cable driving clutch 550 mm, sleeve 290 mm, Ø 6 mm, M6
5%
Clutch cable driving clutch 550 mm, sleeve 290 mm, Ø 6 mm, M6
Hole Ø (mm): 6 | Sleeve length (mm): 290 | Cable length (mm): 550 | Thread: M6
€62,58 €51,72 €59,45 €49,13
 
CARLISLE External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
5%
CARLISLE
External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm
€10,32 €8,53 €9,80 €8,10
 
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 135 ccm, connection A2
5%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 135 ccm, connection A2
No. of grooves: 2 | Nominal voltage (V): 12 | Oil quantity (ccm): 135 | Pulley Ø...
€465,49 €384,70 €442,20 €365,45
 
LUK Thrust bearing 50 x 90 x 21,6 mm
5%
LUK
Thrust bearing 50 x 90 x 21,6 mm
Dimensions (mm): 50 x 90 x 21.6
€85,00 €70,25 €80,75 €66,74
 
MAHLE Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil, V/TO
38%
MAHLE
Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil, V/TO
Pulley Ø (mm): 132 | Refrigerant: R 134a | Connection: V/TO | Fixing: EM | Nomin...
€475,74 €393,17 €297,30 €245,70
 
GRANIT Clutch plate 280 sintered, 22 x 25 mm, 10 splines
5%
GRANIT
Clutch plate 280 sintered, 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Sintered clutch ...
€124,64 €103,01 €118,40 €97,85
 
GRANIT Clutch plate single clutch 35 x 40 mm, 14 splines
5%
GRANIT
Clutch plate single clutch 35 x 40 mm, 14 splines
Additional information: Made in Germany | Dimensions (mm): 35 x 40, 14 grooves
€406,80 €336,20 €386,45 €319,38
 
Alternator 14 V, 120 A, flange 83 mm, pulley Ø 55 mm, PV x 8
5%
Alternator 14 V, 120 A, flange 83 mm, pulley Ø 55 mm, PV x 8
Belt tension hole Ø / R (mm): - / 86,0 | Nominal values (V / A): 14 / 120 | Nomi...
€164,55 €135,99 €156,30 €129,17
 
GRANIT Mirror 275 x 457 x 159 mm, rod-Ø 20 mm, hole pattern 40 mm
5%
GRANIT
Mirror 275 x 457 x 159 mm, rod-Ø 20 mm, hole pattern 40 mm
Hole pattern (mm): 40 | Rod Ø (mm): 20 | Dimensions (mm): 275 x 457 x 159 | Radi...
€75,14 €62,10 €71,35 €58,97
 
GRANIT Mirror Case IH, New Holland
5%
GRANIT
Mirror Case IH, New Holland
€52,10 €43,06 €49,45 €40,87
 
Elring Crankshaft seal for 70 x 100 x 12,67 / 16 mm, PTFE / ACM
5%
Elring
Crankshaft seal for 70 x 100 x 12,67 / 16 mm, PTFE / ACM
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylic rubber)
€37,33 €30,85 €35,45 €29,30
 
MAHLE Gear reduction starter 12 V, 2,6 kW, 9 teeth, Ø 110 mm, clockwise
38%
MAHLE
Gear reduction starter 12 V, 2,6 kW, 9 teeth, Ø 110 mm, clockwise
€522,12 €431,50 €326,30 €269,67
 
MAHLE Gear reduction starter 12 V, 4,2 kW, 9 teeth, Ø 110 mm, clockwise
38%
MAHLE
Gear reduction starter 12 V, 4,2 kW, 9 teeth, Ø 110 mm, clockwise
€613,17 €506,75 €383,20 €316,69
 
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, Ø 110 mm, clockwise
20%
HELLA
Starter motor 12 V, 3,0 kW, 9 teeth, Ø 110 mm, clockwise
€629,64 €520,36 €506,20 €418,35
 
Showing 145 - 168 of 276

New Holland TN95 parts

A TN95 often handles the daily work around the barn and yard, so maintenance touches very different parts of the tractor. This page holds more than 250 parts that fit it, from GRANIT, Cobo, LUK, MAHLE and GRAMMER.

Lift linkage

For the hydraulic lift there are lifting shaft seals, lift arm shaft bushes and piston sealing rings, which are also listed for Ford and Fiat. Play in the lift arms usually comes from worn bushes. Replace the bushes on both sides and fit new seals at the same time to keep the oil in and the dirt out.

Air conditioning and cab

If you spend long summer days in the cab, you want the air conditioning to work. There are air conditioning compressors and V-belts for the compressor drive. You will also find gas struts for the door, Compacto seats, combined indicator and position lights, tank caps and ball type drawbars. If an indicator and position light only works half the time, check its earth connection first. Keep the drawbar ball lightly greased and put a cap on it when not in use. A squealing compressor belt is loose or glazed and should be replaced.

A tank cap with a blocked vent can make the engine lose power after a while because a vacuum builds up in the tank. A new cap is a quick fix.

Starting, charging and clutch

The electrical side is covered by alternators, starter motors and gear reduction starters. Check the voltage before choosing a starter, as there are versions for twelve and for twenty four volt systems. If unsure, read the plate on the old starter or measure the battery voltage. A new alternator needs a tight belt. Check it again after a few working hours, because new belts stretch a little at first.

For the clutch there are thrust bearings and double clutch assemblies, some from LUK. A thrust bearing that starts to sing when you press the clutch is best replaced in good time, as a seized bearing damages the clutch assembly too.

Choosing the right part

The type plate tells you if it really is a TN95. For seals and bushes, compare the number on the old part with the reference number shown with the product, and check left or right.

Within the TN series, the New Holland TN75 also has its own page. If one sits next to your TN95, order its parts there. For other models from the brand, go to New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart