Menu
EUR

New Holland TS110A tractor parts & technical data

Shop by model for the New Holland TS110A. More than 250 parts for the TS-A series are listed, including trailer couplings, electrics and lighting.

291 parts found for New Holland TS110A
Show:
Dayco Belt tensioner Case IH MXU 100-135, Maxxum 100-145, Puma 115-165
8%
Dayco
Belt tensioner Case IH MXU 100-135, Maxxum 100-145, Puma 115-165
€248,94 €205,74 €229,02 €189,28
 
Tank cap thread 45 mm
Tank cap thread 45 mm
Version: Thread: 45 mm.
€22,91 €18,94
 
Oil sump gasket Case IH, Steyr, New Holland
8%
Oil sump gasket Case IH, Steyr, New Holland
€48,74 €40,28 €44,84 €37,06
 
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
23%
ROCKINGER
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.504,05 €1.243,02 €1.158,85 €957,72
 
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
5%
Scharmüller
Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.070,65 €884,83 €1.013,17 €837,33
 
Push button switch PTO shaft with connection cable and plug
8%
Push button switch PTO shaft with connection cable and plug
Version: Front PTO operation, Connection cable with plug.
€193,40 €159,83 €177,93 €147,05
 
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
8%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€77,66 €64,18 €71,45 €59,05
 
Preheating relay 12 volt with plug connection
8%
Preheating relay 12 volt with plug connection
Version: 12 V, with plug connection.
€170,59 €140,98 €156,94 €129,70
 
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
21%
ROCKINGER
Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
Version: Lever upwards
€2.492,67 €2.060,06 €1.970,56 €1.628,56
 
Scharmüller Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
8%
Scharmüller
Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): 9,3 | Colo...
€269,09 €222,39 €247,56 €204,60
 
Steering cylinder Ford, Case IH, New Holland
8%
Steering cylinder Ford, Case IH, New Holland
€648,05 €535,58 €596,21 €492,73
 
Seal kit hydraulic steering Case IH, New Holland
8%
Seal kit hydraulic steering Case IH, New Holland
€106,44 €87,97 €97,92 €80,93
 
Seal kit hydraulic steering Case IH, New Holland
8%
Seal kit hydraulic steering Case IH, New Holland
€47,79 €39,50 €43,97 €36,34
 
Ball joint 125 mm, taper 24 - 27 mm, 3/4" x 16 / 1 1/8" x 16
8%
Ball joint 125 mm, taper 24 - 27 mm, 3/4" x 16 / 1 1/8" x 16
A: 125 mm. C: 3/4" x 16 mm. D: 1 1/8" x 16 mm. E: 24 mm. F: 27 mm. Taper: 24 - 2...
€64,90 €53,64 €59,71 €49,35
 
Ball joint 75 mm, 7/8" x 14 mm, 1 1/4", taper 27 - 32 mm
8%
Ball joint 75 mm, 7/8" x 14 mm, 1 1/4", taper 27 - 32 mm
A: 75 mm. C: 7/8" x 14 mm. D: 1 1/4" mm. E: 27 mm. F: 32 mm. Taper: 27 - 32 mm.
€120,97 €99,98 €111,29 €91,98
 
Master brake cylinder mineral oil Ø 31,4 mm Case IH, New Holland, Steyr
8%
Master brake cylinder mineral oil Ø 31,4 mm Case IH, New Holland, Steyr
Piston Ø: 31,4 mm.
€277,14 €229,04 €254,97 €210,72
 
Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
8%
Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm.
€225,87 €186,67 €207,80 €171,74
 
Scharmüller Adapter plate rail width 295 mm, hole pattern 140 x 80 mm, M16
17%
Scharmüller
Adapter plate rail width 295 mm, hole pattern 140 x 80 mm, M16
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 295 mm. Hole pattern: 140 ...
€617,18 €510,07 €512,27 €423,37
 
VICTOR REINZ Valve cover gasket Case IH, Steyr, New Holland
VICTOR REINZ
Valve cover gasket Case IH, Steyr, New Holland
€11,49 €9,49
 
Thermostat gasket Case IH, Steyr, New Holland
8%
Thermostat gasket Case IH, Steyr, New Holland
€33,42 €27,62 €30,75 €25,41
 
Air hose inlet manifold inner-Ø 57 / 76 mm, length 94 mm
8%
Air hose inlet manifold inner-Ø 57 / 76 mm, length 94 mm
Inner Ø: 57 / 76 mm. Length: 94 mm.
€69,05 €57,07 €63,53 €52,50
 
Seal lift arm shaft 60 x 75 x 8,5 mm Fiat, Ford, New Holland
8%
Seal lift arm shaft 60 x 75 x 8,5 mm Fiat, Ford, New Holland
Dimensions: 60 x 75 x 8.5 SL mm.
€33,17 €27,41 €30,52 €25,22
 
Mirror 145 x 195 mm Case IH, New Holland
8%
Mirror 145 x 195 mm Case IH, New Holland
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€58,03 €47,96 €53,39 €44,12
 
Fender bracket left complete sprung front axle with brake MXU 100-135
8%
Fender bracket left complete sprung front axle with brake MXU 100-135
€451,01 €372,74 €414,93 €342,92
 
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
23%
ROCKINGER
Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
Colour: Black. Description: Entire coupling body and bearing forged, Easy height...
€1.126,27 €930,80 €867,77 €717,17
 
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
5%
Scharmüller
K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
 
Spiegelarm left Case IH, New Holland
8%
Spiegelarm left Case IH, New Holland
€192,61 €159,18 €177,20 €146,45
 
Wiper motor windshield Case IH, New Holland
8%
Wiper motor windshield Case IH, New Holland
€313,64 €259,21 €288,55 €238,47
 
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
21%
Walterscheid
Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
 
Oil pressure switch engine 1/4" BSP, 0,4 - 0,7 bar, blade terminal 6,3 mm
Oil pressure switch engine 1/4" BSP, 0,4 - 0,7 bar, blade terminal 6,3 mm
Version: Thread: 1/4" BSP, Switching pressure: 0.4-0.7 bar, Blade terminal 6.3 m...
€19,83 €16,38
 
Sensor driving speed rear axle, connection cable with plug
8%
Sensor driving speed rear axle, connection cable with plug
Version: Driving speed sensor (rear axle housing), Connection cable with plug.
€124,37 €102,79 €114,42 €94,56
 
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
8%
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
Version: Rotation angle sensor (position), electronic linkage control, For clutc...
€151,60 €125,29 €139,47 €115,27
 
Multifunction switch indicator, parking light, dipped beam
8%
Multifunction switch indicator, parking light, dipped beam
Version: With function: indicator light, parking light, dipped beam, full beam, ...
€167,77 €138,65 €154,35 €127,56
 
Rocker switch rear lift lifting and lowering
8%
Rocker switch rear lift lifting and lowering
Version: (Rear operation) lifting and lowering.
€80,49 €66,52 €74,05 €61,20
 
Cobo Indicator/position light oval PY21W, R5W right
8%
Cobo
Indicator/position light oval PY21W, R5W right
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation location: Right. ...
€118,81 €98,19 €109,31 €90,33
 
Contact switch gear switch status LOW black
8%
Contact switch gear switch status LOW black
Version: Status switch, LOW (black).
€100,19 €82,80 €92,17 €76,18
 
MAHLE Gear reduction starter 12 V, 4,2 kW, 10 teeth, 245 mm, clockwise
40%
MAHLE
Gear reduction starter 12 V, 4,2 kW, 10 teeth, 245 mm, clockwise
€480,04 €396,73 €287,51 €237,61
 
Seal kit Ford Series 10-8340, New Holland TS80-TS110
8%
Seal kit Ford Series 10-8340, New Holland TS80-TS110
€82,59 €68,26 €75,98 €62,80
 
Track rod A 1610 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
8%
Track rod A 1610 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 40 mm.
€187,43 €154,90 €172,44 €142,51
 
Wabco Compressor 11,5 bar, 159 cm³, Ø 75 mm, stroke 36 mm
8%
Wabco
Compressor 11,5 bar, 159 cm³, Ø 75 mm, stroke 36 mm
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min...
€1.893,95 €1.565,25 €1.742,43 €1.440,03
 
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
23%
ROCKINGER
Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.088,39 €899,50 €838,59 €693,05
 
Dayco Idler pulley Ø 65 mm, height 32 mm, Tector Case IH, Steyr, New Holland
8%
Dayco
Idler pulley Ø 65 mm, height 32 mm, Tector Case IH, Steyr, New Holland
Outer Ø: 65 mm. Height: 32 mm. Installation location: Tector.
€144,32 €119,27 €132,77 €109,73
 
Silencer with Venturi nozzle for air extraction, version L / cab
8%
Silencer with Venturi nozzle for air extraction, version L / cab
€1.077,44 €890,45 €991,24 €819,21
 
Tank cap thread 45 mm, for expansion tank
Tank cap thread 45 mm, for expansion tank
Version: Thread: 45 mm, For expansion tank.
€16,78 €13,86
 
Showing 97 - 144 of 291

Parts for the New Holland TS110A

Keeping a TS110A going is often a matter of small parts: a switch that only works when you wiggle it, a sender giving a false reading, a ball joint with play in it. More than 250 New Holland TS110A parts are gathered on this page, supplied by GRANIT, Scharmüller, ROCKINGER, Cobo and Walterscheid.

Switches, senders and lights

The cab has a whole row of switches, and contact switches, rocker switches and push button switches are all available here, together with work lamps. When a switch starts working intermittently, pull it out of the panel and look at the connector first. Green corrosion on the terminals is frequently the real fault, and cleaning it can save you the cost of a new switch.

For the engine and transmission there are sensors, such as the transmission oil temperature sender, and oil pressure switches. If the oil pressure gauge behaves oddly, test the switch before suspecting anything more serious inside the engine.

Steering and loader work

Loader work puts heavy loads on the front axle, and track rod ball joints are among the parts that wear quickest on a TS110A. Check the rubber boot at every service. Once it splits, water and grit get in and the joint wears out quickly. Always fit a new joint with a new locking nut or split pin rather than reusing the old one.

Hydraulics, hitch and fuel

For a leaking linkage there are piston sealing rings, lift shaft seals and complete seal kits. At the rear you can fit automatic drawbars, Piton Fix hitches, adapter plates and a drawbar retrofit kit. A ventilated tank cap is listed as well.

Before fitting a seal kit, lower the linkage fully so there is no residual pressure in the system. Clean every component and give the new seals a light coat of hydraulic oil, which stops them rolling or tearing as you slide the parts together.

Identifying your tractor and part

The TS-A tractors look almost identical, so read the serial plate first. If it says TS110A, you are in the right place. Then take the reference number from the old part. On sensors it is normally on the hex, while on seals it may only be printed on the packaging, so keep that if you still have it. For a drawbar, measure the rail and compare the shape of the locking mechanism.

Each of the other TS-A models has its own page with the parts that fit it.

The full list of models is on New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart