Menu
EUR

New Holland TS110A tractor parts & technical data

Shop by model for the New Holland TS110A. More than 250 parts for the TS-A series are listed, including trailer couplings, electrics and lighting.

291 parts found for New Holland TS110A
Show:
Tank cap thread 45 mm, for expansion tank
Version: Thread: 45 mm, For expansion tank. More
Version: Thread: 45 mm, For expansion tank.
€16,78 €13,86
Tank cap grommet-Ø 55 mm
Neck Ø: 55 mm. More
Neck Ø: 55 mm.
€19,59 €16,19
Radiator Steyr Profi, New Holland TS, Case IH Farmall, MXU
To fit as: Steyr Serie Profi (4100–6140 Tier 3 and Classic, with or without Serial No Z*BF60001, years 2003–2011), Serie Profi CVT (4110, 4120, 41... More
To fit as: Steyr Serie Profi (4100–6140 Tier 3 and Classic, with or ...
€989,09 €817,43 €909,96 €752,04
You save 8%
Hand throttle cable A 1300 mm, B 1185 mm New Holland TS 115
A: 1300 mm. B: 1185 mm. More
A: 1300 mm. B: 1185 mm.
€54,86 €45,34 €50,47 €41,71
You save 8%
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
€14,93 €12,33
Air hose intercooler inner-Ø 57 mm, length 90 mm
Inner Ø: 57 mm. Length: 90 mm. More
Inner Ø: 57 mm. Length: 90 mm.
€43,60 €36,03 €40,11 €33,15
You save 8%
Belt kit 1550 mm, 8 ribs, belt tensioner
Version: For main belt drive. Contents: Belt, belt tensioner. Belt length: 1550 mm. Ribs: 8 n. More
Version: For main belt drive. Contents: Belt, belt tensioner. Belt len...
€47,54 €39,29 €43,74 €36,15
You save 8%
Hinge for rear screen, left Case IH, New Holland
€106,57 €88,07 €98,04 €81,03
You save 8%
Door lock, right Case IH, Steyr, New Holland
Installation location: rechts. More
Installation location: rechts.
€182,19 €150,57 €167,61 €138,52
You save 8%
Lift shaft New Holland T6.120-T7.210
€1.117,14 €923,26 €1.027,77 €849,40
You save 8%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.489,09 €1.230,65 €1.197,32 €989,52
You save 20%
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value:...
€1.953,30 €1.614,30 €1.594,29 €1.317,60
You save 18%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 38 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€815,76 €674,19
Scharmüller Drawbar manual rail width 330 mm, coupling pin 31 mm, 82,4 kN
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€693,63 €573,25 €611,61 €505,46
You save 12%
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€2.347,24 €1.939,87 €1.855,75 €1.533,68
You save 21%
Scharmüller Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 140 x 80 mm. Guide width: 32 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pat...
€676,60 €559,17
Solenoid switch valve 132 mm, PWM-valve
Version: 132 mm, PWM valve. More
Version: 132 mm, PWM valve.
€210,19 €173,71
Sensor wheel speed Hall Matteffekt, connection cable with plug
Version: For speed, clutch block transmission (Hall effect), Connection cable with plug. More
Version: For speed, clutch block transmission (Hall effect), Connectio...
€116,92 €96,63 €107,57 €88,90
You save 8%
Contact switch mechanical brake light and start safety switch
Version: Brake light and start safety switch. More
Version: Brake light and start safety switch.
€35,01 €28,93 €32,21 €26,62
You save 8%
Rocker switch four-wheel drive dashboard Maxxum, MXU, Puma
Version: Mounting: dashboard. More
Version: Mounting: dashboard.
€139,08 €114,94 €127,95 €105,75
You save 8%
Number plate light 12V5WGLLS / W5W, 12 V
Bulb: 12V5WGLLS / W5W. Nominal voltage: 12 V. Type: Bulb. More
Bulb: 12V5WGLLS / W5W. Nominal voltage: 12 V. Type: Bulb.
€39,20 €32,40
Cobo Glass lamp right
Cobo
Installation location: Right. More
Installation location: Right.
€83,08 €68,66 €76,43 €63,17
You save 8%
Cobo Rear light left 262 x 99 x 152 mm, hole spacing 140 mm, M6, 12 V
Cobo
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: Plug. Width: 262 mm. Form: Rectangular, corners rounded. Height: 99 mm. Hole spacing: 140 mm. Di... More
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: Plug. Width: 262...
€124,15 €102,60 €114,22 €94,40
You save 8%
Cobo Lamp glass right, left
Cobo
Installation location: Right, left. More
Installation location: Right, left.
€20,08 €16,59
HELLA Multifunction relay N/O-contact 12 V, 40 A, 4-pin, 6,3 mm
HELLA
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal 6.3 mm. More
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal 6.3 mm.
€18,94 €15,65
Seal kit hydraulic steering Case IH MXU 100-115, New Holland
€58,09 €48,01 €53,44 €44,17
You save 8%
LUK Torsion damper PTO shaft 8 teeth, 31,9 x 35
LUK
Number of teeth: 8. Tooth profile: 31.9x35. More
Number of teeth: 8. Tooth profile: 31.9x35.
€267,68 €221,22 €246,27 €203,53
You save 8%
LUK Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
LUK
Number of teeth: 16. Tooth profile: 31x35. Menke no.: 92343. More
Number of teeth: 16. Tooth profile: 31x35. Menke no.: 92343.
€765,95 €633,02 €704,67 €582,38
You save 8%
Ring gear Ø 384/410 mm, 127 teeth Case IH, New Holland
Version: Ø 384/410 mm, 127 teeth. More
Version: Ø 384/410 mm, 127 teeth.
€284,35 €235,00 €261,60 €216,20
You save 8%
Dayco V-belt air conditioning 990 mm, 4 ribs Case IH, Steyr, New Holland
Dayco
Length: 990 mm. Ribs: 4 n. More
Length: 990 mm. Ribs: 4 n.
€32,29 €26,68
Counterweight Case IH JX 90-95, JXU 75-115, MXU 100-130
€1.290,97 €1.066,92 €1.187,69 €981,56
You save 8%
Piston, complete 3 rings, piston pin Ø 38 x 82 mm, without cylinder liner
Dimensions: 3 rings, Gudgeon pin Ø 38 x 82 mm, Combustion chamber Ø 52.3 mm, Combustion chamber depth 24 mm, Rings 2.8 (trapezoidal ring) / 2.4 mm /... More
Dimensions: 3 rings, Gudgeon pin Ø 38 x 82 mm, Combustion chamber Ø ...
€131,91 €109,02 €121,36 €100,30
You save 8%
Thermostat Ø 60,5 mm, 81 °C Case IH, Steyr, New Holland
Ø: 60,5 mm. Temperature: 81 °C. More
Ø: 60,5 mm. Temperature: 81 °C.
€47,95 €39,63 €44,11 €36,46
You save 8%
Thermostat Ø 60,5 mm, 81 °C Case IH, Steyr, New Holland
Ø: 60,5 mm. Temperature: 81 °C. More
Ø: 60,5 mm. Temperature: 81 °C.
€42,93 €35,48 €39,50 €32,64
You save 8%
Cooling fan Ø 500 mm Ford, Case IH, Fiat, Steyr, New Holland
V-belt for air conditioning 990 mm, 4 ribs
Length: 990 mm. Reference no.: S.149086. Ribs: 4 n. Version: For air conditioning system. Description: For air conditioning system. More
Length: 990 mm. Reference no.: S.149086. Ribs: 4 n. Version: For air c...
€24,93 €20,60
Heating flange Steyr Profi, New Holland TS, Case IH MXU
€186,74 €154,33 €171,80 €141,98
You save 8%
Cylinder head gasket 1,25 mm engine F4DFE413A/B/C/E
€110,75 €91,53 €101,89 €84,21
You save 8%
High-pressure pump diesel Case IH, Steyr, New Holland
€1.099,86 €908,98 €1.011,87 €836,26
You save 8%
Belt kit 1537 mm, 8 ribs, belt tensioner
Version: For main belt drive. Contents: Belt, belt tensioner. Belt length: 1537 mm. Ribs: 8 n. More
Version: For main belt drive. Contents: Belt, belt tensioner. Belt len...
€328,47 €271,46 €302,19 €249,75
You save 8%
Feed pump Case IH, New Holland engine F4C, F4DE04, F4DE06, 667TA
Windshield frame shock absorber 250 N, 490 mm, stroke 201 mm
suitable for: Frontscheibe. Newtons: 250. A: 490 mm. B: 245 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 18 mm. Stroke: 201 mm. To fit: Windscreen. More
suitable for: Frontscheibe. Newtons: 250. A: 490 mm. B: 245 mm. C: 10 ...
€59,92 €49,52 €55,13 €45,56
You save 8%
Showing 145 - 192 of 291

Parts for the New Holland TS110A

Keeping a TS110A going is often a matter of small parts: a switch that only works when you wiggle it, a sender giving a false reading, a ball joint with play in it. More than 250 New Holland TS110A parts are gathered on this page, supplied by GRANIT, Scharmüller, ROCKINGER, Cobo and Walterscheid.

Switches, senders and lights

The cab has a whole row of switches, and contact switches, rocker switches and push button switches are all available here, together with work lamps. When a switch starts working intermittently, pull it out of the panel and look at the connector first. Green corrosion on the terminals is frequently the real fault, and cleaning it can save you the cost of a new switch.

For the engine and transmission there are sensors, such as the transmission oil temperature sender, and oil pressure switches. If the oil pressure gauge behaves oddly, test the switch before suspecting anything more serious inside the engine.

Steering and loader work

Loader work puts heavy loads on the front axle, and track rod ball joints are among the parts that wear quickest on a TS110A. Check the rubber boot at every service. Once it splits, water and grit get in and the joint wears out quickly. Always fit a new joint with a new locking nut or split pin rather than reusing the old one.

Hydraulics, hitch and fuel

For a leaking linkage there are piston sealing rings, lift shaft seals and complete seal kits. At the rear you can fit automatic drawbars, Piton Fix hitches, adapter plates and a drawbar retrofit kit. A ventilated tank cap is listed as well.

Before fitting a seal kit, lower the linkage fully so there is no residual pressure in the system. Clean every component and give the new seals a light coat of hydraulic oil, which stops them rolling or tearing as you slide the parts together.

Identifying your tractor and part

The TS-A tractors look almost identical, so read the serial plate first. If it says TS110A, you are in the right place. Then take the reference number from the old part. On sensors it is normally on the hex, while on seals it may only be printed on the packaging, so keep that if you still have it. For a drawbar, measure the rail and compare the shape of the locking mechanism.

Each of the other TS-A models has its own page with the parts that fit it.

The full list of models is on New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart