Menu
EUR

New Holland TS110A tractor parts & technical data

Shop by model for the New Holland TS110A. More than 250 parts for the TS-A series are listed, including trailer couplings, electrics and lighting.

291 parts found for New Holland TS110A
Show:
Sensor power take-off speed, connection cable with plug
Version: PTO shaft (speed), PTO speed, Connection cable with plug. More
Version: PTO shaft (speed), PTO speed, Connection cable with plug.
€90,35 €74,67 €83,12 €68,70
You save 8%
Potentiometer transmission for electronic control unit with connector
Version: For electronic control unit, Connection cable with plug. More
Version: For electronic control unit, Connection cable with plug.
€151,72 €125,39 €139,58 €115,36
You save 8%
Sensor power take-off speed 23,5 mm with connection cable and plug
Version: Sensor, PTO shaft speed, 23.5 mm long, Connection cable with plug. More
Version: Sensor, PTO shaft speed, 23.5 mm long, Connection cable with ...
€63,19 €52,23
Push button switch rear PTO shaft 48 V, button yellow, Ø 30 mm, stroke 5 mm
Version: 48 V switching voltage, Yellow button, break contact External switch on the rear mudguard, Total button travel: 5 mm, Ø 30 mm, plug connecti... More
Version: 48 V switching voltage, Yellow button, break contact External...
€47,79 €39,50 €43,97 €36,34
You save 8%
Push button switch PTO shaft, connection cable with plug
Version: PTO (PTO shaft switch), With mechanical control units, Connection cable with plug. More
Version: PTO (PTO shaft switch), With mechanical control units, Connec...
€132,02 €109,11 €121,46 €100,38
You save 8%
Direction switch steering wheel mounting, forwards - forwards
Version: Forwards/neutral/reverse, lock, Connection cable with plug. More
Version: Forwards/neutral/reverse, lock, Connection cable with plug.
€254,45 €210,29 €234,09 €193,47
You save 8%
Work lamp H3, 12 V, 55 W, square
Nominal voltage: 12 V. Form: Rectangular. Bulb: H3. Power consumption: 55 W. Bulbs included: -. More
Nominal voltage: 12 V. Form: Rectangular. Bulb: H3. Power consumption:...
€155,79 €128,75
Cobo Glass lamp left
Cobo
Installation location: Left. More
Installation location: Left.
€83,08 €68,66 €76,43 €63,17
You save 8%
Cobo Indicator/position light oval PY21W, R5W left
Cobo
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation location: Left. Cable length: 1200 mm. Type: Bulb. More
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation locatio...
€112,58 €93,04 €103,57 €85,60
You save 8%
Contact switch gear switch status HI gray
Version: Status switch, HI (grey). More
Version: Status switch, HI (grey).
€92,56 €76,50 €85,16 €70,38
You save 8%
Pressure sensor thread 1 x 7,0 mm
Thread: 1 x 7.0 mm. Menke no.: 210301. More
Thread: 1 x 7.0 mm. Menke no.: 210301.
€35,67 €29,48 €32,82 €27,12
You save 8%
Brake lining hand brake lining on one side Case IH, Steyr, New Holland
Brake lining hand brake pad on both sides Case IH, Steyr, New Holland
Radiator Steyr, Case IH, New Holland
To fit as:
Steyr Series Profi: 4100, 4115 Tier 3, 6115–6135 Profi
Case IH Series Farmall: 110A–125A; Series Maxxum: 100–115 Tier 3; Series MXU...
More
To fit as:
Steyr Series Profi: 4100, 4115 Tier 3, 6115–6135 Profi
...
€1.165,39 €963,13 €1.122,16 €927,41
You save 4%
Borg Warner Fan clutch Ford, Case IH, Steyr, New Holland
€343,31 €283,73 €288,79 €238,67
You save 16%
Vibration damper Case IH Farmall 85C-115C, Steyr Profi 6125, 6140
€109,31 €90,34 €100,57 €83,11
You save 8%
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Ø: 98.59 x 88.27 x 5.16 mm. More
Ø: 98.59 x 88.27 x 5.16 mm.
€4,43 €3,66
Idler pulley Ø 65 / 32 mm Case IH, Steyr, New Holland
€126,84 €104,83 €116,69 €96,44
You save 8%
Optibelt Powerband multi-rib belt 8 ribs Case IH, Steyr, New Holland
€75,87 €62,70 €69,80 €57,69
You save 8%
Cylinder head gasket 1,15 mm Case IH, Steyr, New Holland
€128,92 €106,55 €118,61 €98,02
You save 8%
Bearing for lower link shaft Ø 30 mm Ford, Case IH, Fiat, Steyr, New Holland
€64,99 €53,71 €59,79 €49,41
You save 8%
Stabilizer cat. 1, 410 mm, eye-Ø 19 mm, clevis width 44 mm
Eye Ø: 19 mm. Description: Gabelkopfbreite 44 mm. Cat.: 1. Length min./max.: 410 mm. Type: SLA-B-040. Assembly notes: Automatische Verriegelung. More
Eye Ø: 19 mm. Description: Gabelkopfbreite 44 mm. Cat.: 1. Length min...
€631,17 €521,63 €580,68 €479,90
You save 8%
Bush left lift arm shaft 62,8 x 68,2 x 40 mm Ford, Fiat, New Holland
Dimensions: 62.8 x 68.2 x 40 mm. More
Dimensions: 62.8 x 68.2 x 40 mm.
€23,03 €19,03
Seal kit Hürlimann, Deutz-Fahr, Steyr
Reference no.: 47436943. More
Reference no.: 47436943.
€81,67 €67,50 €75,14 €62,10
You save 8%
Sensor waterpeil fuel filter, M10
Version: Fuel filter indicator (water level), Thread: M10. More
Version: Fuel filter indicator (water level), Thread: M10.
€141,72 €117,12 €130,38 €107,75
You save 8%
Pressure switch air conditioning line with union nut, connection cable and plug
Version: Connection with union nut, Connection cable and plug. More
Version: Connection with union nut, Connection cable and plug.
€135,73 €112,17 €124,87 €103,20
You save 8%
Light switch work light, built-in dashboard
Version: Installation: dashboard. More
Version: Installation: dashboard.
€42,12 €34,81 €38,75 €32,03
You save 8%
Cobo Direction switch 12 / 24 V, cable 700 mm, series 316
Cobo
Power rating max. 12 V: 5 A bei 12 V, 2,5 A bei 24 V. Form: Serie 316. Switching function: vorwärts - neutral - rückwärts - parken. Cable length: 7... More
Power rating max. 12 V: 5 A bei 12 V, 2,5 A bei 24 V. Form: Serie 316....
€278,54 €230,20 €256,26 €211,78
You save 8%
Work lamp H3 55 W, 12 V, square
Bulb: H3. Form: Rectangular. Nominal voltage: 12 V. Power consumption: 55 W. Bulbs included: -. More
Bulb: H3. Form: Rectangular. Nominal voltage: 12 V. Power consumption:...
€181,92 €150,35 €174,33 €144,08
You save 4%
Cobo Rear light right 262 x 99 x 152 mm, hole spacing 140 mm, M6, 12 V
Cobo
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Connection: Plug. Width: 262 mm. Form: Rectangular, corners rounded. Height: 99 mm. Hole spacing: 140 mm... More
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Connection: Plug. Width:...
€124,15 €102,60 €114,22 €94,40
You save 8%
Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal. More
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€11,13 €9,19
Relays changeover contact 12 V, 10 - 20 A, without bracket, 5-pin
Version: 12 V / 10 - 20 A, Without holder, 5-pin, Connection: 3 x 4.8 mm, 2 x 6.3 mm, With parallel resistor to suppress inductive interference voltag... More
Version: 12 V / 10 - 20 A, Without holder, 5-pin, Connection: 3 x 4.8 ...
€18,88 €15,60
Flasher unit 12 V, 16 blade connections, with holder
Version: 12 V, with bracket, Control unit for indicator and hazard warning lights, 16 blade terminals. More
Version: 12 V, with bracket, Control unit for indicator and hazard war...
€253,55 €209,55 €233,27 €192,78
You save 8%
HELLA Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
HELLA
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm.
€20,33 €16,80
Sensor 4-pin, thread 2 x 7,5 mm
Version: 4-pin. Thread: 2 x 7.5 mm. More
Version: 4-pin. Thread: 2 x 7.5 mm.
€69,43 €57,38 €63,88 €52,79
You save 8%
LUK Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
LUK
Number of teeth: 16. Tooth profile: 31X35. More
Number of teeth: 16. Tooth profile: 31X35.
€575,13 €475,31 €529,12 €437,29
You save 8%
LUK Torsion damper 16 teeth, 31X35 Case IH, Steyr, New Holland
LUK
Number of teeth: 16. Tooth profile: 31x35. More
Number of teeth: 16. Tooth profile: 31x35.
€366,09 €302,55 €336,80 €278,35
You save 8%
Sealing ring hand brake brake piston 329,6 x 336,4 x 3,4 mm
€63,04 €52,10 €58,00 €47,93
You save 8%
Brake disc Ø 327 mm, thickness 10 mm, 12 teeth
€243,39 €201,15 €223,92 €185,06
You save 8%
Cylinder head bolt M12 x 150 mm Case IH, Steyr, New Holland
Dimensions: M12 x 150 mm. More
Dimensions: M12 x 150 mm.
€5,76 €4,76
Replacement glass curved 315 x 225 mm, unheated Massey Ferguson, Case IH
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Right/left. More
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Ri...
€16,84 €13,92
Tank sender fuel gauge 6 cylinder Maxxum 100-140, MXU 100-135
Version: Fuel gauge, For tractors with 6-cylinder engine. More
Version: Fuel gauge, For tractors with 6-cylinder engine.
€402,48 €332,63 €370,28 €306,02
You save 8%
Tank sender fuel gauge 4 cylinder Maxxum 100-140, MXU 100, 110
Version: Fuel gauge, For tractors with 4-cylinder engine. More
Version: Fuel gauge, For tractors with 4-cylinder engine.
€475,63 €393,08 €437,58 €361,64
You save 8%
Sensor laadluchttemperatuur
Version: For charge air temperature. More
Version: For charge air temperature.
€64,27 €53,12 €59,13 €48,87
You save 8%
Showing 241 - 288 of 291

Parts for the New Holland TS110A

Keeping a TS110A going is often a matter of small parts: a switch that only works when you wiggle it, a sender giving a false reading, a ball joint with play in it. More than 250 New Holland TS110A parts are gathered on this page, supplied by GRANIT, Scharmüller, ROCKINGER, Cobo and Walterscheid.

Switches, senders and lights

The cab has a whole row of switches, and contact switches, rocker switches and push button switches are all available here, together with work lamps. When a switch starts working intermittently, pull it out of the panel and look at the connector first. Green corrosion on the terminals is frequently the real fault, and cleaning it can save you the cost of a new switch.

For the engine and transmission there are sensors, such as the transmission oil temperature sender, and oil pressure switches. If the oil pressure gauge behaves oddly, test the switch before suspecting anything more serious inside the engine.

Steering and loader work

Loader work puts heavy loads on the front axle, and track rod ball joints are among the parts that wear quickest on a TS110A. Check the rubber boot at every service. Once it splits, water and grit get in and the joint wears out quickly. Always fit a new joint with a new locking nut or split pin rather than reusing the old one.

Hydraulics, hitch and fuel

For a leaking linkage there are piston sealing rings, lift shaft seals and complete seal kits. At the rear you can fit automatic drawbars, Piton Fix hitches, adapter plates and a drawbar retrofit kit. A ventilated tank cap is listed as well.

Before fitting a seal kit, lower the linkage fully so there is no residual pressure in the system. Clean every component and give the new seals a light coat of hydraulic oil, which stops them rolling or tearing as you slide the parts together.

Identifying your tractor and part

The TS-A tractors look almost identical, so read the serial plate first. If it says TS110A, you are in the right place. Then take the reference number from the old part. On sensors it is normally on the hex, while on seals it may only be printed on the packaging, so keep that if you still have it. For a drawbar, measure the rail and compare the shape of the locking mechanism.

Each of the other TS-A models has its own page with the parts that fit it.

The full list of models is on New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart