Menu
EUR

New Holland TVT145 tractor parts & technical data

The New Holland TVT145 from the TVT series is well covered here: more than 250 parts, with trailer couplings, electrics and lighting leading the way.

244 parts found for New Holland TVT145
Show:
GRAMMER Tractor seat air suspended fabric, 480 mm, 12 V, MSG95G/721
GRAMMER
Tractor seat air suspended fabric, 480 mm, 12 V, MSG95G/721
Comfort seat with air suspension and 12V compressor. Armrests, height adjustable...
€1.079,85 €892,44
 
Scharmüller Drawbar 640 mm, 90 x 50 mm, pin 31,5 mm, 78,5 kN, position 1
Scharmüller
Drawbar 640 mm, 90 x 50 mm, pin 31,5 mm, 78,5 kN, position 1
Category: Drawbar | Pin Ø (mm): 31,5 | D-value (kN): 78,5 | Version: Standard | ...
€377,90 €312,31
 
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
16%
Scharmüller
Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.390,39 €1.149,08 €1.171,10 €967,85
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.228,70 €1.015,45
 
GRANIT Pin upper arm CARRARO front axle 147984 Case IH, New Holland
5%
GRANIT
Pin upper arm CARRARO front axle 147984 Case IH, New Holland
€163,83 €135,40 €155,60 €128,60
 
ROCKINGER Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
20%
ROCKINGER
Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
Automatic version
€2.688,62 €2.222,00 €2.161,65 €1.786,49
 
Oil sump gasket Massey Ferguson, Case IH, Steyr, New Holland
5%
Oil sump gasket Massey Ferguson, Case IH, Steyr, New Holland
€74,31 €61,41 €70,55 €58,31
 
Passenger seat plastic black
Passenger seat plastic black
To fit: New Holland. Colour: Schwarz. Upholstery type: Plastic, black.
€334,45 €276,41
 
Walterscheid Piton Fix rail width 335 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
21%
Walterscheid
Piton Fix rail width 335 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.863,82 €1.540,35 €1.464,40 €1.210,25
 
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
18%
Walterscheid
Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. C...
€1.871,87 €1.547,00 €1.544,25 €1.276,24
 
Mirror black unheated 185 x 130 mm, rod Ø 10, 12, 13 mm
5%
Mirror black unheated 185 x 130 mm, rod Ø 10, 12, 13 mm
Tractor type: all types with cover, half-cab and cab.
€33,53 €27,71 €31,85 €26,32
 
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
20%
ROCKINGER
Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.043,02 €862,00 €838,55 €693,02
 
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
12%
Scharmüller
Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 k...
€1.024,14 €846,40 €905,70 €748,51
 
Collet set Valtra-Valmet 255-865
Collet set Valtra-Valmet 255-865
€5,45 €4,50
 
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
12%
Scharmüller
Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€907,50 €750,00 €802,55 €663,26
 
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
21%
Walterscheid
Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 ...
€1.175,21 €971,25 €923,35 €763,10
 
ROCKINGER Drawbar frame 330/25/32, 2000/3000 kg, 84,3 kN
23%
ROCKINGER
Drawbar frame 330/25/32, 2000/3000 kg, 84,3 kN
To fit as: Case IH, Same, Doppstadt, New Holland, Deutz-Fahr, Steyr, Lamborghini...
€1.387,39 €1.146,60 €1.062,30 €877,93
 
Position sensor linkage for lower link shaft
5%
Position sensor linkage for lower link shaft
Version: Function: position sensor for lifting arm shaft.
€462,84 €382,51 €439,65 €363,35
 
SACHS Damper cab suspension S26X100, 235 mm, eye Ø 12 mm, rear
5%
SACHS
Damper cab suspension S26X100, 235 mm, eye Ø 12 mm, rear
Design: Oil pressure | To fit: CNH, SDF, STEYR, VALMET | Installation location: ...
€166,42 €137,54 €158,00 €130,58
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 152 mm, 2 grooves
5%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 152 mm, 2 grooves
Fixing: EM | Pulley Ø (mm): 152 | Connection: A2 | Suitable oil: SP - 15 | No. o...
€595,38 €492,05 €565,60 €467,44
 
Cobo Headlight right H4, 12 V, built-in New Holland
5%
Cobo
Headlight right H4, 12 V, built-in New Holland
Bulbs included: No | Light function: Dipped beam, full beam | Test mark: ECE | I...
€320,18 €264,61 €304,15 €251,36
 
Showing 1 - 24 of 244

New Holland TVT145 parts

More than 250 parts fit the New Holland TVT145, and you will find them all on this page. They come from GRANIT, Scharmüller, ROCKINGER, Carraro and GRAMMER and cover the rear hitch, the engine, the cab and the dashboard.

Engine and lubrication

For the engine there are water pump gaskets, O-rings for the oil filler cap, seals for the lubrication line and sealing rings. V-belts and alternators keep the charging circuit going, and bushes are available for pivot points.

A water pump gasket goes on clean, dry faces. Scrape off every trace of the old gasket and avoid adding sealant unless the manufacturer calls for it, because excess compound can break off and block the cooling passages.

The rear hitch

A height adjustable adapter plate carries the drawbar, top drawbar or Piton Fix. Check the hole pattern of the plate on your tractor before ordering a replacement. With an automatic drawbar, make sure the latch drops cleanly and the pin has not worn oval. A pin with play will wear out the jaw quickly.

Cab and dashboard

  • Air suspended tractor seats from GRAMMER
  • Rocker switches for the front work lights
  • Push button switches, for example for lowering the front linkage
  • Gas struts for the bonnet

If the bonnet starts to sink, replace both struts together. One fresh strut working against a tired one pulls the bonnet out of line and wears faster itself.

The O-ring on the oil filler cap is small but it matters. Once it dries out, oil mist escapes from a warm engine and dust finds its way in. Replace it as soon as it feels hard or flattened. A V-belt that squeals at start-up is usually slack or glazed. Check the tension and the pulley grooves, because a new belt will not last on worn grooves.

Bushes in pivot points wear gradually. If a joint rattles or a pin sits at an angle in its bore, a new bush is due. Drift the old one out with a suitable punch, clean the bore and press the new bush in square, so it does not wear oval straight away. Then grease the point until fresh grease appears on both sides.

Finding the right fit

The TVT145 is a model from the TVT series by New Holland. A glance at the type plate removes any doubt about the model. For gaskets and seals, the reference number on the old part is what you can rely on, and for switches, the symbol on the button.

Other tractors from the TVT series have pages of their own:

For any other model from this manufacturer, head to New Holland parts and pick your tractor there.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart