Menu
EUR

New Holland TVT145 tractor parts & technical data

The New Holland TVT145 from the TVT series is well covered here: more than 250 parts, with trailer couplings, electrics and lighting leading the way.

244 parts found for New Holland TVT145
Show:
Valve cover gasket engine Sisu 320D
Valve cover gasket engine Sisu 320D
€23,40 €19,34
 
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
16%
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.364,41 €1.127,61 €1.149,20 €949,75
 
Scharmüller Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
12%
Scharmüller
Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 140 ...
€704,78 €582,46 €623,25 €515,08
 
GRANIT Pressure switch gear insertion, hydraulic filter
GRANIT
Pressure switch gear insertion, hydraulic filter
Version: Gear insertion, hydraulic filter.
€504,20 €416,69
 
External plate Ø 189 mm, 3,2 mm, 46 teeth Case IH, New Holland, Steyr
5%
External plate Ø 189 mm, 3,2 mm, 46 teeth Case IH, New Holland, Steyr
Version: Ø 189 mm, thickness: 3.2 mm, 46 splines
€89,03 €73,58 €84,55 €69,88
 
GRANIT Potentiometer Carraro front axle 145109
5%
GRANIT
Potentiometer Carraro front axle 145109
€246,96 €204,10 €234,60 €193,88
 
GRANIT Axial joint 209 mm, M20 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
5%
GRANIT
Axial joint 209 mm, M20 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
A: 209 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø E: 40 mm.
€92,00 €76,03 €87,40 €72,23
 
Carraro Bush Ø 44 x 38,5 mm, length 8,9 mm Case IH, New Holland
Carraro
Bush Ø 44 x 38,5 mm, length 8,9 mm Case IH, New Holland
Outer Ø: 44 mm. Inner Ø: 38,5 mm. Length: 8,9 mm.
€16,00 €13,22
 
Scharmüller Support plates ball 80, 1142 x 240 mm, 4000 kg
Scharmüller
Support plates ball 80, 1142 x 240 mm, 4000 kg
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 mm. Width:...
€2.220,60 €1.835,21
 
Heating element
5%
Heating element
€233,98 €193,37 €222,25 €183,68
 
Engine preheater, complete connection Ø 40 mm, press
5%
Engine preheater, complete connection Ø 40 mm, press
Connection: Ø 40 mm press fitting.
€427,72 €353,49 €406,30 €335,79
 
GRANIT Tank cap thread 45 mm, for expansion tank
GRANIT
Tank cap thread 45 mm, for expansion tank
Version: Thread: 45 mm, For expansion tank.
€16,00 €13,22
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€561,80 €464,30
 
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
23%
ROCKINGER
Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.498,36 €1.238,31 €1.147,30 €948,18
 
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
16%
Scharmüller
Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 ...
€889,04 €734,74 €748,81 €618,85
 
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
21%
Walterscheid
Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
 
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
18%
Walterscheid
Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
 
HELLA Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
HELLA
Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installa...
€78,40 €64,79
 
HELLA Rear light right hole spacing 110 mm, 12 V
23%
HELLA
Rear light right hole spacing 110 mm, 12 V
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. Width: 149 ...
€95,00 €78,51 €72,75 €60,12
 
Relays changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Relays changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal.
€8,90 €7,36
 
Showing 49 - 72 of 244

New Holland TVT145 parts

More than 250 parts fit the New Holland TVT145, and you will find them all on this page. They come from GRANIT, Scharmüller, ROCKINGER, Carraro and GRAMMER and cover the rear hitch, the engine, the cab and the dashboard.

Engine and lubrication

For the engine there are water pump gaskets, O-rings for the oil filler cap, seals for the lubrication line and sealing rings. V-belts and alternators keep the charging circuit going, and bushes are available for pivot points.

A water pump gasket goes on clean, dry faces. Scrape off every trace of the old gasket and avoid adding sealant unless the manufacturer calls for it, because excess compound can break off and block the cooling passages.

The rear hitch

A height adjustable adapter plate carries the drawbar, top drawbar or Piton Fix. Check the hole pattern of the plate on your tractor before ordering a replacement. With an automatic drawbar, make sure the latch drops cleanly and the pin has not worn oval. A pin with play will wear out the jaw quickly.

Cab and dashboard

  • Air suspended tractor seats from GRAMMER
  • Rocker switches for the front work lights
  • Push button switches, for example for lowering the front linkage
  • Gas struts for the bonnet

If the bonnet starts to sink, replace both struts together. One fresh strut working against a tired one pulls the bonnet out of line and wears faster itself.

The O-ring on the oil filler cap is small but it matters. Once it dries out, oil mist escapes from a warm engine and dust finds its way in. Replace it as soon as it feels hard or flattened. A V-belt that squeals at start-up is usually slack or glazed. Check the tension and the pulley grooves, because a new belt will not last on worn grooves.

Bushes in pivot points wear gradually. If a joint rattles or a pin sits at an angle in its bore, a new bush is due. Drift the old one out with a suitable punch, clean the bore and press the new bush in square, so it does not wear oval straight away. Then grease the point until fresh grease appears on both sides.

Finding the right fit

The TVT145 is a model from the TVT series by New Holland. A glance at the type plate removes any doubt about the model. For gaskets and seals, the reference number on the old part is what you can rely on, and for switches, the symbol on the button.

Other tractors from the TVT series have pages of their own:

For any other model from this manufacturer, head to New Holland parts and pick your tractor there.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart