Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH 485 tractor parts & technical data

The Case IH 485, also known as IHC 485, is covered here with more than 200 items, from steering and front axle parts to vintage parts, brakes and transmission.

221 parts found for Case IH 485
Show:
SACHS Clutch plate single clutch 35 x 40 mm, 10 splines Case IH
8%
SACHS
Clutch plate single clutch 35 x 40 mm, 10 splines Case IH
Dimensions (mm): 35 x 40 10 grooves | Flywheel dimension (mm): 38
€505,52 €417,79 €465,08 €384,36
 
LUK Clutch kit Case IH 248 - 3434
8%
LUK
Clutch kit Case IH 248 - 3434
Contents: Pressure plate 458128005511, clutch plate 458328017542
€684,66 €565,83 €629,89 €520,57
 
LUK Clutch plate 280TKCN 1 1/8 inch, 10 splines, sintered Case IH
8%
LUK
Clutch plate 280TKCN 1 1/8 inch, 10 splines, sintered Case IH
Dimensions (inches): 1 1/8"" 10 grooves | Material specifications: Sintered clut...
€341,80 €282,48 €314,46 €259,88
 
Elring Gasket set lower Case IH engine D-155, D-179
8%
Elring
Gasket set lower Case IH engine D-155, D-179
Additional information: Without cylinder liner gasket set
€241,71 €199,76 €222,37 €183,78
 
Axial joint 180 mm, M20 x 1,5, M22 x 1,5, 30°, Ø 35 mm
8%
Axial joint 180 mm, M20 x 1,5, M22 x 1,5, 30°, Ø 35 mm
A: 180 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. F: 30 °. Ø B: 52 mm. Ø E: 35 mm.
€69,51 €57,45 €63,95 €52,85
 
Ring gear Ø 405/371 mm, 126 teeth Case IH
8%
Ring gear Ø 405/371 mm, 126 teeth Case IH
Version: Ø 405/371 mm  126 teeth.
€78,79 €65,12 €72,49 €59,91
 
Side plate gasket engine block Case IH
8%
Side plate gasket engine block Case IH
€35,47 €29,31 €32,63 €26,97
 
Crankshaft, 3-cylinder standard engine D-179 Case IH 385-3220
8%
Crankshaft, 3-cylinder standard engine D-179 Case IH 385-3220
Notes: Please follow the instructions in the installation guide. Please complete...
€1.521,45 €1.257,40 €1.399,73 €1.156,81
 
Seal hydraulic pump Case IH
Seal hydraulic pump Case IH
€2,41 €1,99
 
Lifting spindle complete 580 - 710 mm, thread 7/8", yoke 45 mm Case IH
8%
Lifting spindle complete 580 - 710 mm, thread 7/8", yoke 45 mm Case IH
Dimensions: Length min. = 580, Length max. = 710, Thread = 7/8", Ø top = 16, Ø b...
€172,85 €142,85 €159,02 €131,42
 
Flasher unit electronic 12 V, 6 connections, with holder
8%
Flasher unit electronic 12 V, 6 connections, with holder
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with bracket, ...
€50,77 €41,96 €46,71 €38,60
 
SACHS Thrust bearing 60 x 102 x 20,5 mm Case IH 238 - 4240
8%
SACHS
Thrust bearing 60 x 102 x 20,5 mm Case IH 238 - 4240
Dimensions (mm): 60 x 102 x 20.5
€99,18 €81,97 €91,25 €75,41
 
Elring Cylinder head gasket set with valve stem seal engine D-206, D-239, D-268
8%
Elring
Cylinder head gasket set with valve stem seal engine D-206, D-239, D-268
Additional information: With valve stem seal
€202,15 €167,07 €185,98 €153,70
 
Ball joint 255 mm, taper 20 - 22,2 mm, M18 x 1,5, M22 x 1,5
8%
Ball joint 255 mm, taper 20 - 22,2 mm, M18 x 1,5, M22 x 1,5
A: 255 mm. C: M18 x 1,5 mm. D: M22 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 2...
€83,90 €69,34 €77,19 €63,79
 
Gasket water channel Case IH Series 85-1455 XL, D 440
8%
Gasket water channel Case IH Series 85-1455 XL, D 440
€41,25 €34,09 €37,95 €31,36
 
VICTOR REINZ Cylinder head gasket set Case IH 484, Series 32-3220, E 353-824
8%
VICTOR REINZ
Cylinder head gasket set Case IH 484, Series 32-3220, E 353-824
€149,09 €123,21 €137,16 €113,36
 
VICTOR REINZ Gasket set complete engine D-206 - D-268 Case IH
8%
VICTOR REINZ
Gasket set complete engine D-206 - D-268 Case IH
€420,84 €347,80 €387,17 €319,98
 
Air receiver gasket Case IH
Air receiver gasket Case IH
€21,89 €18,09
 
Gasket front cover engine D-206, D-358, DT-358, DT-402 Case IH
8%
Gasket front cover engine D-206, D-358, DT-358, DT-402 Case IH
€86,58 €71,55 €79,65 €65,83
 
O-ring oil pump Case IH
O-ring oil pump Case IH
€2,03 €1,67
 
Bush for nozzle holder brass, injection nozzle Ø 10 mm Case IH
8%
Bush for nozzle holder brass, injection nozzle Ø 10 mm Case IH
Menke no.: 68402.
€48,95 €40,45 €45,03 €37,22
 
Piston set complete Ø 98,43 mm, combustion chamber 56 mm Case IH
8%
Piston set complete Ø 98,43 mm, combustion chamber 56 mm Case IH
Dimensions: 3 rings, Ø 98.43 mm, gudgeon pin Ø 36 x 82 mm, combustion chamber Ø ...
€128,76 €106,41 €118,46 €97,90
 
Return line Case IH 584-884, Series 42-4240, Hydro 84
8%
Return line Case IH 584-884, Series 42-4240, Hydro 84
€134,60 €111,24 €123,83 €102,34
 
Seal
Seal
€1,68 €1,38
 
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 4...
€48,67 €40,22 €44,78 €37,01
 
HELLA Glass rear right IHC, Eicher, John Deere, Schlüter, Volvo
HELLA
Glass rear right IHC, Eicher, John Deere, Schlüter, Volvo
To fit as: Case IH 248, 385, 484, 485, 485 XL, 585 XL, 644, 685 XL, 743, 744, 74...
€26,28 €21,71
 
External plate Hi-Lo 1,5 mm, inner 98 mm, outer 125 mm Case IH
External plate Hi-Lo 1,5 mm, inner 98 mm, outer 125 mm Case IH
Version: thickness = 1,5 mm inner = 98 mm outer = 125 mm
€38,48 €31,80
 
Clutch plate single clutch 35 x 40 mm, 10 splines Case IH
8%
Clutch plate single clutch 35 x 40 mm, 10 splines Case IH
Dimensions (mm): 35 x 40 10 grooves | Additional information: Made in Germany
€378,75 €313,02 €348,45 €287,98
 
HELLA Starter motor 12 V, 1,1 kW, 9 teeth, Ø 74 mm, clockwise
4%
HELLA
Starter motor 12 V, 1,1 kW, 9 teeth, Ø 74 mm, clockwise
€334,60 €276,53 €322,25 €266,33
 
Ball joint 382 mm, M14 x 1,5, 20,5 mm, taper 15,6 - 17,9 mm
8%
Ball joint 382 mm, M14 x 1,5, 20,5 mm, taper 15,6 - 17,9 mm
A: 382 mm. C: M14 x 1,5 mm. D: 20,5 mm. E: 15,6 mm. F: 17,9 mm. Taper: 15,6 - 17...
€62,98 €52,05 €57,94 €47,89
 
VICTOR REINZ Cylinder head gasket set Case IH 474-884, Series 32-4240, Hydro 84
8%
VICTOR REINZ
Cylinder head gasket set Case IH 474-884, Series 32-4240, Hydro 84
€232,02 €191,75 €213,46 €176,41
 
Button thread M5 Case IH 784-884, Series 32-4240, D 440
8%
Button thread M5 Case IH 784-884, Series 32-4240, D 440
€35,10 €29,01 €32,29 €26,69
 
Nozzle cap Case IH
8%
Nozzle cap Case IH
€70,08 €57,92 €64,47 €53,28
 
Drain valve thread 1/4" BSP
Drain valve thread 1/4" BSP
Thread: 1/4" BSP.
€13,18 €10,89
 
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
 
Valve scraper set Ø 13,1 x 9,3 mm, thickness 12 mm Case IH
Valve scraper set Ø 13,1 x 9,3 mm, thickness 12 mm Case IH
Outer Ø: 13,1 mm. Inner Ø: 9,3 mm. Material: ACM (polyacrylic rubber). Thickness...
€7,93 €6,55
 
HELLA Rocker switch on/off 12/24 V, 16 A, 2 blade connections
HELLA
Rocker switch on/off 12/24 V, 16 A, 2 blade connections
Version: On/off switch, 12 V/24 V, power rating: 16 A at 12 V, 8 A at 24 V, 2 bl...
€21,31 €17,61
 
HELLA Rear light left / right with number plate light
HELLA
Rear light left / right with number plate light
To fit as: Case IH 248, 385, 484, 485, 485 XL, 585 XL, 644, 685 XL, 743, 744, 74...
€43,49 €35,94
 
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth clockwise, Ø 89 mm
40%
MAHLE
Starter motor 12 V, 3,0 kW, 10 teeth clockwise, Ø 89 mm
€630,00 €520,66 €377,34 €311,85
 
Bearing wheel hub 95 x 135 x 20 mm Carraro front axle 406519 Case IH
8%
Bearing wheel hub 95 x 135 x 20 mm Carraro front axle 406519 Case IH
€81,04 €66,98 €74,56 €61,62
 
Center bearing drive shaft 32 x 62 x 37 mm Case IH
8%
Center bearing drive shaft 32 x 62 x 37 mm Case IH
€91,54 €75,65 €84,22 €69,60
 
ZF Bush ZF front axle 28 x 32 x 30 mm Case IH 385, 485, 248
8%
ZF
Bush ZF front axle 28 x 32 x 30 mm Case IH 385, 485, 248
€64,20 €53,06 €59,06 €48,81
 
Ball joint 115 mm, taper 23,5 - 26,5 mm, M20 x 1,5 / M30 x 1,5
8%
Ball joint 115 mm, taper 23,5 - 26,5 mm, M20 x 1,5 / M30 x 1,5
A: 115 mm. C: M20 x 1,5 mm. D: M30 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5...
€61,40 €50,74 €56,49 €46,68
 
Axial joint 190 mm, M20 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
8%
Axial joint 190 mm, M20 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
A: 190 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€76,93 €63,58 €70,78 €58,49
 
Ball joint 85 mm, M20 x 1,5, M24 x 1,5, taper 23 - 25 mm
8%
Ball joint 85 mm, M20 x 1,5, M24 x 1,5, taper 23 - 25 mm
A: 85 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23 mm. F: 25 mm. Taper: 23 - 25 m...
€32,82 €27,12 €30,19 €24,95
 
Showing 49 - 96 of 221

Case IH 485 parts

The Case IH 485, still known to many as the IHC 485, is a tractor that tends to be repaired rather than replaced. It belongs to the 85 series, and this page has more than 200 parts for it from GRANIT, ZF, HELLA, LUK and VICTOR REINZ. A good number are gaskets and seals, which is what you need once the engine or hydraulics come apart.

Engine overhaul

  • Upper cylinder head gasket sets with valve stem seals, and full gasket sets
  • Thermostat gaskets and crankshaft seal sets
  • Feed pump O-rings and sealing rings for the fuel filter
  • Radiator hoses, including the bypass hose
  • Filter glass

The glass bowl on the fuel pre-filter is worth a look at every service. If water or dirt has settled at the bottom, drain it before it reaches the pump. Refit the bowl with a new seal and bleed the line. When you replace a radiator hose, renew rusty clamps too, because a new hose under an old clamp will still weep.

Clutch, steering and linkage

For the clutch there are clutch plates from LUK. Steering is covered by ball joints, the three point linkage by complete lifting spindles and pivot pins. You will also find bushes, hydraulic pump seals and HELLA flasher units.

Play in a ball joint shows up as vague steering. Have someone rock the steering wheel back and forth while you watch the joints, and the worn one will give itself away.

Set a new lifting spindle to length once it is fitted. Turn both spindles until the lower links sit at the same height, or the implement will hang crooked. Grease the thread, because a seized spindle is very hard to adjust later. Pivot pins and bushes in the linkage are best renewed together, as a new pin in a worn bush soon has play again.

An upper head gasket set with valve stem seals is meant for anyone taking the head off. Have the head checked for flatness while it is off and always fit the new stem seals. Worn seals let oil run down the valve stems, which shows as blue smoke on a cold start.

Identifying the right part

On a tractor of this age the type plate is sometimes hard to read. The reference number on the old part then helps, stamped into a casting or printed on a gasket. For lifting spindles and ball joints, measure the length and thread of the old one.

These tractors from the same series have their own pages:

For any other model from the brand, start from Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart